• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.169-169
• /
• 2011

Xylans are polysaccharides present in large amounts in cell walls of land plants. However, during kraft cooking, a high portion of hemicelluloses including xylans are dissolved in the cooking liquor. In the current trend for a more effective utilization of biomass, attention has been paid to the exploitation of xylans as strength-enhancing additives for paper. It is believed that surface xylan adds flexibility to the cell wall/fiber surface, resulting in stronger fiber-fiber joints or greater contact area between the fibers. Accordingly, there is proposal for a new pulping process involving the extraction of xylan prior to pulping, followed by their re-adsorption on the unbleached pulp. A suitable bleaching process should be employed then, which ought to does not only improve the brightness of the pulp, but also remain the effect of the adsorption of xylan on pulp fibers. The objective of this research was to investigate the impact of hydrogen peroxide bleaching on the properties of unbleached hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (brightness, post color number, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. In the meantime, the influence of process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.81-87
• /
• 2014

Conditions of paper manufacturing process should be changed depending on the end use and paper properties. Most of the case, mixed pulps with long softwood fibers and short hardwood fibers are used to achieve proper qualities of product with reasonable production cost. For specialty paper manufacture the wood pulp and cotton linter pulp are usually mixed together. The objectives of this study is to analyze physical, mechanical and fracture mechanical properties of paper depending on SwBKP, HwBKP and cotton linter pulp(CLP) mixing. When the mixing ratio of SwBKP was increased, strength properties, such as tensile, tear, and folding endurance, were also increased. When the mixing ratio of SwBKP and HwBKP was increased, stress concentration index was decreased and fracture toughness was increased.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.1-12
• /
• 1999

Of the vast number of plant taxa in the world, the wood is one of the most useful resources. It is important to identify the fibers of wood and pulp for the plant taxonomy and for the uses, but we do not have enough information on them, on them, especially for the computerizd data. The fiber identification is one of the difficult tasks. In addition to the plant taxonomy and the fiber-using industries, such identification is also important in many other fields, including education. document examiners, etc. For these purpose, the fibers should be exactly distinguished. The TISS system I have programed to identify various woods would also be useful in the identification of fibers by the genus and species in the features of unknown samples and in searching the features of a species based on its scientific name. Such searching programs are being developed in many other countries with a view to searching for the species name by using the features of the cells of the woody materials. With the survey of all the available literature, the features of the fibers of 124 species both of softwood and hardwood were examined under the electron and optical microscopies. Each species were coded and carded by the feature, and the databases were built. The microscopic were inputted into a personal computer program called and by a slide film scanner. The new computer program called TISS 2 was developed using C computer language. Korean language fonts were added to the TISS 2. The TISS 2 can be in adding and searching a image of fiber features both of a known fiber and an unknown fiber. The databases were corded for the DELTA system with was developed by Dallwitz and Paine in Australia, 1986.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.231-237
• /
• 2006

Grease barrier food containers are commonly used for packaging of fast food, cooked food, and food in general. Greaseproofing is also used for certificate paper and label paper etc. Different pulp raw materials, due to their different fiber morphology and chemical compositions, produce papers of varying characteristics. We used optical photomicroscopy and fiber analysis data to evaluate fiber morphology and traits under various beating conditions in order to understand which pulp raw materials produced superior greaseproofing property when a fluorinated greaseproofing agent was added internally. The experiment studied 9 species of pulps, including 2 softwood (northern pine and radiata pine) bleached kraft pulps which were beaten to 550 and 350 mL CSF, respectively; 3 hardwoods (eucalypts, acacia, mixed Indonesian hardwoods) bleached kraft pulps which were beaten to 450 and 250 mL CSF, respectively; and nonwood fibers of reed, bagasse, and abaca. A fluorinated greaseproofing chemical at 0.12% dosage with respect to dry pulp was added to each pulp preparation and formed handsheets. A total of 67 sets of handsheets were prepared, and their basis weights, thickness, bulks, opacities, wet opacities, air resistance, water absorption and degrees of greaseproofing were measured for an overall evaluation of pulp and freeness on greaseproofing papers. The experimental fiber length, coarseness and distribution characteristics and the greaseproofing results suggest that softwood pulps (radiate pine > northern pine) were superior to hardwood pulps (eucalypts > acacia > mixed Indonesian hardwoods). The unbeaten pulps gave papers with high porosities and nearly devoid of greaseproofing property. Greaseproofing is proportional to air resistance. Among the nonwood fibers, bagasse had the best greaseproofing property, followed by reed and abaca was the poorest. With regards to waterproofing property, hardwood pulps (mixed Indonesian hardwoods > acacia > eucalypts) were better than softwood pulps (northern pine > radiate pine). Among the Nonwood fibers, reed had the highest waterproofing property, and it was followed by abaca, while bagasse had the poorest waterproofing characteristic. In summary, bleached kraft northern pine, eucalypts and reed pulps were best suited for making greaseproofing papers, Freeness of the pulps should be kept at $200{\sim}280mL$ CSF for optimal performance.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.31-42
• /
• 2007

To investigate the pyrolytic and anatomical characteristics of Korean softwood, Pinus densi-flora, Pinus rigida and Larix leptolepis, and hardwood, Acer palntatum, Fraxinus rhynchophylla and Quercus variabilis, chemical components analysis, TG-DTA (Thermogravimetric Analysis & Differential Thermal Analysis), MBA (Methylene Blue Adsorption) test and SEM observation were carried out. For TG-DTA, samples were carbonized up to $800^{\circ}C$ at the heating rate of $10^{\circ}C$/min under $N_2$ flows 1 l/min using thermogravimetric analyzer. Chemical component analysis of all samples resulted in typical contents of major wood component. In TG-DTA results, softwood showed higher char yield than hardwood, and lignin displayed the highest char yield among the major wood components. All samples showed typical TGA, DTG and DTA curves for wood pyrolysis except a few differences between softwood and hardwood. Content of lignin influenced its pyrolysis characteristics, while molecular structure of lignin affected not only the weight loss but also the yield of char. In MBA test results, MBA of softwoods was higher than that of hardwoods. Char of Pinus densiflora showed the highest MBA, but its degree was lower than activated carbon or fine charcoal about 23 and 4 times, respectively. SEM observation showed carbonization process preserves wood structure and retain the micro-structure of wood fibers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.54-59
• /
• 2015

In this study, effects of kneading concentration on characteristics of hardwood bleached kraft pulp (HwBKP) fibers were elucidated. A laboratory two-shaft kneader was utilized for kneading. Kneading concentration was varied in the range of 15-30% (w/w) and the number of kneading treatment was adjusted between 0 and 6 passes. It was found that kneading concentration influenced fiber characteristics. At 15% of pulp concentration, fiber length slightly increased with increasing the number of kneading passes, while other morphological properties such as fiber width and curl decreased: fiber straightening occurred. In addition, the increase in WRV and the decrease in CSF were the largest at 15% kneading concentration, meanings that fibrillation mainly occurred. In contrast, at higher kneading concentration exceeding 20%, fiber deformation like curl was mainly occurred. Also, at kneading concentration of 20% and 30%, fiber length decreased with the number of kneading passes while other morphological properties such as fiber width, and WRV increased. Severe fiber entanglement was found at 30% kneading, which shall be removed during papermaking.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.22-28
• /
• 2009

The rice hull could be the one of the most abundant agricultural waste in Korea. Since the efficient utilization of agricultural waste or byproducts of food industry would be critical for the sustainable growth, this study conducted the investigation of the chemical composition and the morphological properties of rice hull and rice hull fiber. It was found that there was big difference between the outer surface and the inner surface in the chemical composition and the morphological properties. Expecially, the outer surface showed the rugged patterns in which most of silica of rice hull existed. Little or no silica was found in the inner surface and rice hull fiber. The average fiber length of rice hull fiber was 0.45mm which was shorter than that of hardwood fiber. Rice hull fiber showed a round long shape which is typical shape of non-wood fibers

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.148-153
• /
• 2003

The influence of sizing, fiber and pigment type on coating penetration, using commercial paper and two types of handsheets as the base paper which were prepared from thermomechanical pulp(TMP) and hardwood bleached kraft pulp(KP) sized internally with alkyl ketone dimmer(AKD), was studied in terms of characteristics of coating holdout. Laboratory rod draw down coater was used for surface sizing and coating application. Characterization of coating penetration was done by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a solution of cupriethylenedimine(CED). Data show that internal sizing of base paper is effective and surface sizing is more effective to prevent coating penetration. Comparing between the two types of base papers, backside roughness of coating layer of TMP sheet is much larger and sizing is more effective to reduce coating penetration than those of KP sheet. With regard to pigment type, clay is more effective than calcium carbonate for better coating holdout.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.1-7
• /
• 2008

The trend of using more hardwood and recycled fibers, and closing more tightly of the paper mill white water system has resulted in build-up of fines as well as organic and inorganic contaminants in the white water. This changes in papermaking wet end requires developing chemical additive system that provides good fiber retention and drainage in closed white water system. In this study the effect of charge densities and chemical characteristics of microparticle systems consisted of cationic guar gums and anionic colloidal silica sols on drainage and retention have been examined. Results showed that higher charge density of cationic guar gum and anionic colloidal silica sol gave better retention and drainage. Particularly highly structured silica gave greater retention efficiency.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.67-74
• /
• 2013

Organosolv ethanolamine pulping for oil palm empty fruit bunches(EFB) were evaluated in this study. The screen yield by the ethanolamine pulping were higher than that by the soda pulping at the same operation conditions. The higher concentration of ethanolamine solvent resulted in the higher yield and the lower contents of residual lignin. The EFB pulp fibers were the narrower in fiber width but the higher in coarseness than those of the hardwood pulp fiber, while the fiber length of the EFB pulp fiber were similar to that of the hardwood fiber. The intrinsic zero span tensile testing showed the EFB pulp fiber by the 80% ethanolamine pulping were the stronger than the fiber by the soda pulping. The results of this study supported that the ethanolamine pulping could be used as an alternative pulping method for the EFB.