• Korean Journal of Microbiology
• /
• v.10 no.3
• /
• pp.97-104
• /
• 1972

The extent of water pollution was investigated at 4 stations in Kyonggi Bay during the summer seasons in 1970 and 1971. The concentrations of dissolved oxygen, total hardness, ammonia, nitrate, nitrite, phosphate, chemical oxygen demand, salinity, biochemical oxygen demand, coliform bacteria and facel coli were examined together with the measurement of pH and transparency. The relationship between the extent of pollution and the distance from the Inchon Bay also was examined. The concentrations of biochemical oxygen demand, chemical oxygen demand, ammonia, nitrate, nitrite, phosphate, coliform bacteria nad fecal coli were all highest at station 1, and lowest at station 4. Values were somewhat higher at low tide level in general. On the contrary, dissolved oxygen concentration was highest at station 4 and lowest at station 1. The highest and lowest values of biochemical oxygen demand were 10.88 ppm at station 1 and 0.27 ppm at station 4. The chemical oxygen demand concentrations at station 1 and 4 were 1.90 ppm and 0.63 ppm. Ammonia concnetration at station 1 was 0.43 pp, and was nearly 5 times as much as that at station 4. The values were $2.45{\times}10^{-4}$ ppm at station 1, and $6{\times}10^{-4}$ ppm at station 4. Nitrite concnetration at station 1 was $3{\times}10^{-4}$ppm and was the highest, while the lowest was $9.45{\times}10^{-5}$ ppm at station 4. Phosphate value at station 1 too was the highest and was about 4 times as much as that at station 4. Coliform bacteria were most abundant at station 1, and were counted to be 1.$1.7{\times}10^{-5}$cells/ml. At station 4, the number greatly reduced to 8 * 10$^{2}$ cells/ml. The number of fecal coli at station 1 was $2{\times}10^{-4}$ cells/ml. But at station 4, no fecal coli was detected at high tide level. At low tide level, 3 cells/ml were counted at station 4. In all of these, the highest data were obtained at low tide level, while most of the lowest value, at high tide level. Generally, values at statio 1 were 3-5 times as much as those at station 4. Concentration of dissolved oxygen at station 1 was 0.366 mg-atoms/1 and was the lowest. The highest value was 0.420 mg-atoms/1 and was recorded at station 4. The highest at station 4, which certainly were believed to be the result of the dilution by the fresh water of the Han river flowing into the Inchon Bay. As we can see from the data above, the extent of pollution was highest at station 1, the nearest from Inchon harbor, and lowest at station 4, where is the farthest, Station 1 and 2 were proved to be much polluted, but station 3 and 4, not.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.158-162
• /
• 2005

The objective of this study was to assess the assimilable organic carbon (AOC) in processing water, a measurement of biostability, at several stages of a full-scale nanofiltration (NF) water treatment plant. The NF membrane plant investigated was a $45,400\;m^3$/day (12 mgd) water softening facility at Plantation City in southern Florida, which utilized an organic rich groundwater (dissolved organic carbon (DOC) = 17.6 mg/L) originated from a surficial aquifer. The average AOC concentration of raw feed water was estimated at 158 g/L acetate-C. After pretreatment(acid and antiscalant addition), AOC levels increased by 12.7%, suggesting that pretreatment chemicals used to control scaling may deteriorate feed water biostability. The results also demonstrated that nanofiltration was capable of effectively removing 63.4% of AOC and 94.8% of DOC from the raw water. AOC rejection in stage 1 (${\approx}\;68%$) was slightly higher than that of stage 2 (${\approx}\;58%$) indicating that AOC was removed less at the solution environment (i.e. low pH, high ionic strength and high hardness), which was often created in the $2^{nd}$ stage of full-scale membrane plants due to pretreatment (acid addition) and high recovery operation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1016-1027
• /
• 2015

This study collected 120 figs, classified them into six degrees of maturity according to hardness values, and analyzed contents of organic acids and free sugars. Volatile compounds in figs were investigated using the solid-phase microextraction method of gas chromatography/mass spectrometry. For measurement of texture, elasticity increased up to stage 4 and decreased again. Cohesiveness and brittleness increased with maturation. Organic acids in figs were mainly composed of citric acid, malic acid, and tartaric acid in the final stage. Fructose and glucose were the major sugar components of figs. Fructose content decreased from stage 1 to stage 4 and then increased significantly. One hundred and nineteen volatile compounds were identified in figs, and classes were 14 acids, 15 alcohols, 23 aldehydes, 10 esters, 33 hydrocarbons, 11 ketones, four aromatics, six miscellaneous, and five terpenes. The dominant volatile components in figs were hexadecanoic acid, hexane, dodecanal, DL-limonene, 2-hexanal, nonanal, and 6-methyl-5-hepten-2-one.

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.3
• /
• pp.289-296
• /
• 1998

The quality of physical characteristics were measured, using sensory evaluation and mechanical characteristics where different percentages of chrysanthemums (0%, chrysanthemum indicum power: 1%, 3% and 5%, and Chrysanthemum indicum petals: 1%, 3% and 5%) were added to rice flour, to promote the use of and liking forrice cakes that are a kind of Korean traditional foods. In the sensory evaluation, the color appeared to be the highest when 3% of Chrysanthemum indicum petals was added, and there was a significant difference between the samples used(p<.01). It was also shown that the taste was generally higher in steamed, Gamkugsulgie-dduk added Chrysanthemum indicum than those in which no Chrysanthemum indicum were added, and that it appeared to be the highest, particularly, in rice cakes that 3% of Chrysanthemum indicum petals. However there was no significant difference between the samples. The Chewiness was the highest in rice cakes to Which 3% of Chrysanthemum indicum petals was added but there was no significant difference between the samples. The after-swallow feeling and overall quality were the highest in rice cakes to which 3% of Chrysanthemum indicum petals(p<.01), and there was a significant difference between the samples(p<.01). In terms of change in color, the value of lightness was the highest in rice cakes to which no Chrysanthemum were added. The more the content of Chrysanthemums, the lower the value of lightness but the higher the values of red color(a) and yellow color(b). In the measurement of the texture, using a mechanical characteristics, the springiness was the highest in rice cakes to which 5% of Chrysanthemum indicum powder was added, and the gumminess, hardness and chewiness appeared to be high in rice cakes to which 5% of Chrysanthemum indicum petals was added. In the correlation between the sensory evaluation and mechanical characteristics, the higher the softness, the lower the value of lightness. The softness in the sensory evaluation showed a positive correlation with the values of red color(a) and yellow color(b) in the color test. the chewiness in the sensory evaluation showed a negative correlation with the springness in the mechanical characteristics. In view of the results stated above, a good recipe for steamed, Gamkugsulgie-dduk appeared that the contents of the ingredients used were 291g of rice flour, 9g of Chrysanthemum indicum petals(3% of rice flour) , 30g of sugar, and 3g of sat, 60ml of water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.3
• /
• pp.342-347
• /
• 2008

This study was to develop processed food with the addition of onion powder by investigating the quality characteristics of cookies with various levels (0, 1, 3, 5 and 10%) of hot-air dried yellow and red onion powder. Moisture (11.59%), crude protein (4.56%), and crude ash contents (3.83%) of yellow onion powder showed higher value than red onion powder. Hot-air dried yellow onion powder showed a higher L and b value as compared with red onion powder because of the unique color of the onion. Browning index was lower in red onion powder than red onion powder. Phenolic contents of yellow onion powder appeared to be higher than that of red onion powder. Total sugar contents were higher in red onion powder than yellow onion powder. The pH of the dough significantly decreased with increase of added onion powder contents. Dough density of control had a significantly higher value than the other samples. Hardness measurement showed significantly higher value with increasing additions of onion powder contents; added red onion powder samples were the most highest when compared to added yellow onion powder samples. Results of sensory characteristics showed significantly higher smell, taste, texture and overall acceptability with 3% added red onion sample. Quality characteristics of 5% added yellow onion powder sample and 3% added red onion powder sample indicated possibilities for developments of onion cookies.

• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.1-10
• /
• 2013

This study investigates the quality characteristics of soybean dasik made by mixing roasted beans with ramie leaf(Boehmeria nivea) extract powder. The results are as follows. For soybean dasik not including(0%) ramie leaf(Boehmeria nivea) extract powder, its moisture contents has appeared the lowest to $8.39{\pm}0.98%$, while soybean dasik with 10% ramie leaf extract powder the highest moisture contents to $14.71{\pm}0.02%$. As the content of ramie leaf(Boehmeria nivea) extract powder increased, the L-value, the a-value and b-value of soybean dasik with ramie leaf(Boehmeria nivea) extract powder significantly decreased(p<0.05). Among the texture measurement items of soybean dasik with ramie leaf(Boehmeria nivea) extract powder, the hardness, the gumminess, and the chewiness significantly increased as more amount of ramie leaf(Boehmeria nivea) extract powder added, whereas the adhesiveness and the cohesiveness significantly decreased(p<0.05%). The sensory evaluation, color and taste, softness and overall acceptability of soybean dasik with ramie leaf(Boehmeria nivea) extract powder showed that the one with 8% ramie leaf(Boehmeria nivea) extract powder were the most highly preferred, and there was no significant difference in the flavor. In conclusion, the soybean dasik added with 8% ramie leaf(Boehmeria nivea) extract powder is considered the most desirable in all of color, taste, flavor, and overall acceptability.

• Food Science and Preservation
• /
• v.14 no.3
• /
• pp.239-246
• /
• 2007

The effects of gamma irradiation on the physiochemical and physical characteristics of apples were investigated during post-irradiation storage at $4^{\circ}C\;and\;25^{\circ}C$. The contents of total and reducing sugars were analyzed and the results indicated that apples receiving 1 kGy of gamma irradiation did not show significant differences in sugar contents compared to non-irradiated controls. Important physiological characteristics were evaluated by measurement of total phenolic content and total flavonoid content, reducing power, and radical scavenging ability, and the results indicated that gamma irradiation at a dose of 1 kGy did not affect physiological activities. Changes in physical parameters such as weight loss, strength, cohesiveness and hardness, during post-irradiation storage, were temperature-dependent, whether the apples were irradiated or not The color and sensory acceptance of the apples were not affected by irradiation during cold storage. However, minor deterioration in color quality and sensory acceptance of irradiated apples was noted under ambient temperature storage. We conclude that gamma irradiation(1 kGy) does not affect apple nutritional content stability, functional properties, or physical characteristics, especially upon cold storage after radiation treatment.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.56-62
• /
• 2015

In this study, the quality characteristics of different drying methods of Aronia melanocarpa, which contains large amounts of bioactive substances, were investigated for the improvement of their practical use. During the drying period, the weight reduction was the highest with vacuum freeze drying (81.6%). The water content was reduced to the maximum level when vacuum freeze-drying was used. With regard to the color value measurement results, there were no significant differences in the $L^*$ value. Values of $a^*$ and $b^*$ were increased in vacuum freeze drying and cold air drying, but decreased in hot air drying. The hardness was increased dramatically after 36 hours of hot air drying, while with cold air drying, it increased slowly until 132 hr and increased rapidly after 132 hr. The dried yield was the highest with cold air drying (24.2%). As for the general component analysis results of Aronia melanocarpa, the moisture content was the lowest, and the crude protein and crude fat contents were the highest with vacuum freeze drying. No difference in pH value was shown among the dried Aronia melanocarpa obtained from the different drying methods, but the sugar content was the highest with vacuum freeze drying. The mineral content was the highest with cold air drying, and K, Ca, Mg, and Na were the major minerals. The free sugar content of dried Aronia melanocarpa was found to be 5.92~20.59 g/100 g, and the highest free sugar content was found with vaccum freeze drying.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.104-114
• /
• 2001

To investigate the effects of the addition of Nb and Sn on the recrystallization of Zr- Sn-Nb alloys, both Vickers micro-hardness test and TEP measurement were carried out on cold-worked specimens annealed at various temperatures from $300^{\circ}C$ to 75$0^{\circ}C$. The microstructures of heat treated specimens were analyzed by optical microscope, SEM, and TEM. The study of microhardness and microstructures showed that both recrystallization process and grain growth were retarded as the activation energy was increased by the addition of Nb and Sn. Especially, the addition of Sn was more effective on retarding recrystallization. Precipitates were formed more easily when Nb was added because the solubility of Nb into Zr is lower than that of Sn. However, the recrystallization process was affected more by Sn than Nb because the strain field formed by substitutional Sn repressed the dislocation movement. TEP was increased due to the decrease of electron scattering as recovery and recrystallization were proceeded and saturated when the recrystallization completed. However, when precipitates formed, TEP was increased because the decrease of solute concentration near the precipitates caused the decrease of electron scattering.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.1-19
• /
• 1998

After polymerizing composite resin with argon laser and visible light, four test, to be concretely, measurement of compressive strength using Instron testing machine, surface microhardness using Rockwell hardness tester, quantitative analysis of residual monomer using HPLC and analysis of degree of conversion using FTIR, were accomplished. Test groups were a sort of specimen with 3mm diameter, 4mm thickness for measuring compressive strength, two sort of specimen with 7mm diameter, 2mm and 3mm thickness for measuring surface microhardness, quantitative analysing of residual monomer after curing and measuring the degree of conversion, each were divided by six groups according to the condition of light exposure. In case of argon laser, in 1.0W and 0.5W output, the exposure time for specimen were 5 sec, 10 sec respectiyely. In case of visible light, the exposure time for specimen were 20 sec, 40 sec respectively. The test were accomplished and following results were obtained. 1. Compressive strength of composite resin was the highest in the group of 1 W output, exposing for 10 sec with argon laser, followed by the group of 0.5W, exposing for 10 sec with argon laser, the group of exposing for 40 sec with visible light. But there were statistically no significant difference between these three groups(p>0.05). 2. Surface microhardness of composite resin wasn't significantly affected by light curing conditions. 3. BIS-GMA within residual monomer was least detected in the group of exposing for 40 sec. TEGDMA was least detected in the group of 1 W output, exposing for 10 sec with argon laseboth 2mm and 3mm thickness specimen. 4. The degree of conversion of all groups in the 2mm thickness specimen were more than 50%, similar to each other but in the group of 1W, exposing 10 sec with argon laser the degree of conversion was highest in the 3mm thickness specimen. 5. Argon laser could make composite resin to has similar properties with 25% lesser exposure time than visible light.