• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.85-93
• /
• 1986

The purpose of this study was to investigate the curing effect of visible light through tooth substance, 0.5mm, 1.0mm thickness of enamel and dentin were prepared. Experimental specimen were made by Bisfil M & Silux packing into cylindrical brass mold 6.0mm in diameter, 2.0mm and 3.0mm, in height. All specimen were irradiated by visible light (Grip type) model No. SDL-50 Shofu Co.) for 30 seconds through tooth substance. Experimental groups were classified into enamel group (group 1) and dentin group (group 2) according to the thickness of tooth materials and then were divided into 2 subgroups (0.5mm group and 1.0mm group). In experimental groups, visible light irradiated to the specimen through either 0.5mm in thick or 1.0mm in think of tooth material. In Control group specimen were prepared by direct irradiation on the specimen surface of visible light without through tooth substance. The hardness was measured with a Barcol hardness tester (Barber-Colman Co. U.S.A.) for each prepared specimen. The results were as follows: 1. In control group, there were higher hardness values than those of in experimental group. 2. In experimental groups, 0.5mm groups had higher hardness values than 1.0mm groups did. 3. The hardness value at top surface of the specimen were higher than the hardness of bottom surface in each group. 4. Bisfil M had higher hardness values than Silux. 5. In all specimen of 3.0mm height polymerization effect was not occurred at bottom surface except Bisfil M in control group.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.1
• /
• pp.129-136
• /
• 2022

Purpose : The purpose of this study was to investigate the effect of applying intensity on the muscle activity and muscle hardness of the upper trapezius muscle in adult males when TENS (transcutaneous electrical nerve stimulation) was applied. In addition, this study intends to prepare the scientific basic data of TENS for the purpose of relaxation based on the experimental results. Methods : Eighty-seven healthy adult males participated in the experiment, and they were randomly divided into an experimental group and a control group. All subjects in this study were healthy subjects without musculoskeletal or nervous system damage. All subjects were subjects who voluntarily consented to the purpose and method of the experiment. All subjects were provided with a load by typing for 20 minutes, and muscle activity and muscle hardness of the upper trapezius muscle were measured immediately. Afterwards, TENS was given to each groups for 15 minutes, and the experimental group received stimulation at the motor threshold level, and the control group received a placebo stimulation. After stimulation, muscle activity and muscle hardness of the upper trapezius muscle were measured in the same method. The measured data were compared between groups through an independent t-test and dependent t-test. The statistical significance level was set at .05. Results : The application of TENS statistically significantly decreased the muscle activity and muscle hardness of the trapezius muscle in the experimental group, and the results showed a significant difference from the control group. Conclusion : Application of TENS significantly decreased the muscle activity and muscle stiffness of the upper trapezius muscle. The application of TENS of applying intensity that induces muscle contraction may induce relaxation by reducing the muscle activity and muscle hardness of the trapezius muscle.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.6
• /
• pp.81-90
• /
• 2008

Recently, geofiber(polyester) reinforced soil was added on soil-seed mixture spray to control erosion and to improve vegetation growth on rocky slope sites. This research was conducted to compare vegetation effects and soil hardness on three types of soil-seed mixture spray on stone gabion river bank [A type : soil-seed mixture spray underlying 30cm thick sand with geofiber(geofiber reinforced soil system), B type : soil-seed mixture spray underlying 30cm thick sand without geofiber, C type : soil-seed mixture spray]. Evaluation were made concerning vegetation coverage, soil hardness and moisture content. The results of this study showed that A type system was effective for the growth of vegetation and soil hardness when compareed to B type and C type. A type and B type showed higher covering rate than C type on stone gabion river bank, and especially A type showed the highest covering rate. Soil hardness and water content were high on A type vegetation system compared to B type and C type. We noted that high soil hardness and high moisture content with geofiber(geofiber reinforced soil system) were effective both to control erosion from water current impact and to be high coverage and species of vegetation on stone gabion river bank.

• Advances in materials Research
• /
• v.9 no.1
• /
• pp.49-62
• /
• 2020

Fracture toughness of SiC on Si thin films of thicknesses of 150, 750, and 1500 nm were measured using Agilent XP nanoindenter equipped with a Dynamic Control Module (DCM) in Load Control (LC) and Continuous Stiffness Method (CSM) protocols. The fracture toughness of the Si substrate is also measured. Nanovision images implied that indentations into the films and well deep into the Si caused cracks to initiate at the Si substrate and propagate upward to the films. The composite fracture toughness of the SiC/Si was measured and the fracture toughness of the SiC films was determined based on models that estimate film properties from substrate properties. The composite hardness and modulus of the SiC films were measured as well. For the DCM, the hardness decreases from an average of 35 GPa to an average of 13 GPa as the film thick increases from 150 nm to 1500 nm. The hardness and moduli of the films depict the hardness and modulus of Si at deep indents of 12 and 200 GPa respectively, which correlate well with literature hardness and modulus values of Si. The fracture toughness values of the films were reported as 3.2 MPa√m.

• Journal of Technologic Dentistry
• /
• v.44 no.4
• /
• pp.111-117
• /
• 2022

Purpose: This study was conducted to compare the Vickers hardness on the denture acrylic resins using the glaze color system. Methods: The specimens (20×2 mm) were prepared by mixing according to the manufacturer's protocols through thermal polymerization and self-polymerization. The surface roughness was measured using a testing machine after water-soaking for 48 hours. For the Vickers hardness measurement, the completed specimen was soaked in water for 48 hours and then applied at 200 gf for 30 seconds. Was the specimen immersed after being soaked in water for 48 hours at temperatures of 5℃ and 55℃, respectively, for 30 seconds for the thermos-cycling treatment, and it was carried out 5,000 times. Results: Surface roughness was higher in the more glazing group than in the control group. A significant difference was observed in all groups, except for the Retec Don 2000 and Luciton 199 groups (p<0.05). As a result of measuring the Vickers hardness, the treatment by glaze color showed slightly lower but the thermo-cycling treatment group appeared higher than control group in all. Conclusion: Therefore, the glaze color was found to affect the surface roughness and showed a significant difference. The surface glaze color showed a very high Vickers hardness after the thermo-cycling treatment, indicating that the surface-strengthening effect is greater in the oral environment.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.49-59
• /
• 1971

This experiment was conducted, how making use of "Seracol 100", a kind of nonionic surface active reagent, during cocoon cooking and silk reeling process which is mainly used in Korea and developed by one of the authors since 1965. Main purpose of the experiment is to investigate the influence of the activity of the reelability aid reagent on various degree of hardness component and various salts which are contained in filature water being used by silk factories now. Specifically, it was tried to determine the effects of the reelability aid reagent added to each sample water of artificially differentiated the degree of hardness component upon sericin solubility. Some of the major findings are summarized as follows. 1. "Seracol 100", with below 5$^{\circ}$dH water, increased sericin solubility in each sample water, but above $10^{\circ}$dH the effect of it shows a significant relationship with the different degree of hardness component. Besides the component (MgCO$_3$)$_4$ㆍMg(OH)$_2$, generally, the higher the degree of hardness in the water, the less the amount of desolved sericin in the water showed. There is little or no difference between 1000 times diluted "Seracol 100" water and 2000 times diluted "Seracol 100" water in terms of sericin solubility. 2. The different kind of degree of hardness component shows a significant relationship with sericin solubility, In case use of "Seracol 100", Mg hardness component affected on the sericin solubility more than Ca hardness. But in the control, contrary to this, that is Ca hardness component did more than Mg hardness, 3. The different kind of salts in degree of hardness component show a significant relationship with sericin solubility. In the control water, nitrate is the greatest among salts affecting on sericin solubility, next chloride and sulfate are in order. In case of "Seracol 100" water, chloride is the least among salts, below $10^{\circ}$dH, next sulfate and nitrate are in order, and above 15$^{\circ}$dH, next nitrate and sulfate are in order. 4. In case of "Seracol 100" water, the more contained heavy metal salts (Fe, Al, Cu, Mn) in the water, the less sericin solubility showed. It is found that there is little or no difference among other salts in terms of sericin solubility. But alkaline metal salt remarkably increased sericin solubility. 5. In case of "Seracol 100" water, tinting of the water was affected by Ca salts more than by Mg salts. Among other salts, only Al and Fe affected on the tinting of the water, specifically, in view of the fact that "Seracol 100" water increase the tinting of Fe salt water, but decrease the tinting of raw silk. It is thought that "Seracol 100" deter Fe$^{+2}$ from absorbing to raw silk by deteriorating the activity of Fe$^{+2}$ . 6. "Seracol 100" have the effect on osmosis of the water, After treatment until 2hrs the osmosis of 1000 times diluted "Seracol 100" water is the greatest, next orders are 2000 times diluted "Seracol 100" and control. From 2 hrs to 6 hrs the osmosis of 2000 times diluted water is the greatest, next orders are 1000 times diluted water and control. After 6 hrs the osmosis of the water is the same order as above. 7. In view of tile fact that "Seracol 100" have the effect to control the degree of hardness during the treatment of cocoon layer in the water, it is thought that, in varying degree of hardness in the water, there is a significant relationship between "Seracol 100" and degree of hardness components in cocoon layer.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.4
• /
• pp.421-426
• /
• 2007

This study was carried out to investigate the properties of Kimchi made with potato as compared to Kimchi made with radish. The pH, acidity, hardness, and number of lactic acid bacteria were examined as properties of the Kimchi to determine the suitability of adding the potato and with focus on the possible duration of storage. First in the case of pH, the storage duration at pH $4.2{\sim}4.3$, which is the state for optimal tasting Kimchi, was approximately 10days in the control group, while that of the experimental group was 10 to 16 days, and thus, longer than the control. Second in the case of acidity, representing the maturity of Kimchi, we examined the time it took to reach 0.6% acidity, in which the experimental group took more longer time than the control. Although the experimental group was slower to mature than the control, the period for keeping at the proper pH was longer than that of the control group. Thirdly, in the case of hardness, which relates to softening, the experimental group had remarkably high values. This suggests that the Kimchi in the experimental group had a more rigid texture and more difficultly softening than the control group. Lastly in the case of the number of lactic acid bacteria, which closely relates to the process of fermentation, there were no significant differences. In conclusion, these results indicate that adding potato to Kimchi can extend its storage period.

• Preventive Nutrition and Food Science
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2011

Functional foods play an important role in daily diet, human health and the food industry. Hemp was reported to have many advantages for nutritional and medicinal usage. In this study, extruded hemp-rice (EHR) flour, containing 30% hemp, was mixed with the wheat flour to create bread loaves at the concentrations of 5, 10 and 15%. Bread made from 100% wheat flour (with no added EHR flour) was used as a control. The physical parameters, including expansion ratio, specific volume and crust/crumb color were evaluated separately. In addition, changes in hardness of the bread during storage at ambient temperature for 3 days were also studied. The results showed that 10%-EHR bread exhibited the highest hardness value, while 15%-EHR bread presented the lowest. The bread containing EHR flour had lower specific volume and bigger air cells compared to the control. Moreover, the crust and crumb color of EHR-containing bread was significantly darker than those of the control. In this study, the 15%-EHR bread showed higher specific volume, lower hardness and bigger air cell structures.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.291-296
• /
• 2002

The midsole hardness of athletic footwear affects capability of absorbing impact shock and controls rearfoot movement during running and walking. The prior studies were focused on examining the proper hardness of footwear for rearfoot movement or to finding effective hardness for absorbing impact shock. The displacements of maximal Achilles tendon angle described a amount of pronation motion is decreased when medial hardness of midsole is large more than lateral. Increasing hardness of footwear midsole are effected to reduce maximum and intial pronation angle, but declined the ability of impact shock during heelstrike. For determination of effectiveness hardness of midsole, therefore, the study that makes a compromise between rearfoot movement and absorbing impact during footstrike must be performed. The purpose of this study is to examine quantitative values of rearfoot control and absorbing impact shock with different hardness of medial and lateral midsole on heel portion. The results are useful to define biomechanical hardness of midsole for developing running shoes. As variable for impact shock, accelerations onto shank and knee are measured during 4 running speeds (5, 7, 9, 11km/h). Also, maximum and $10\%$ pronation angle (Achilles tendon angle) were measured using high-speed camera.

• Journal of Welding and Joining
• /
• v.34 no.6
• /
• pp.62-68
• /
• 2016

Laser welding has superior characteristic such as low distortion, high welding speed, easy automation and real time control. But it is easy to occur weld defects such as porosity, crater, humping bead in the area of welding start and end. These weld defects can be suppressed by applying the wave shape control. In this study CW fiber laser was used for welding of $0.5mm^t$ pure titanium. Penetration properties were evaluated with the time of slope up and down. After then the bead shape was observed, and the maximum depth and the area of crater were measured. The bead shape of welding start area changed to be sharp with increase of slope up time and non-weld area of welding start increased. The crater and humping bead were suppressed with slope down time. The cooling rate of crater area was understood through measure of the hardness. Also, The distribution tendency of alloying elements was observed by EPMA and EDS. When wave shape control didn't applied to weld, the hardness of end weld increased due to rapid cooling rate and the hardness of rear part in the crater was higher than that of fore part. On the other hand, when the wave shape control was used for end weld, the increase of hardness in the end weld couldn't be found due to gradual cooling rate.