In recent years, the construction industry has a tendency to increase of high-rise builidngs. High rise buildings can use limited space efficiently. But High rise buildings have problem that have extremely heavy weight. Various studies are being conducted to reduce the weight of buildings. Although lightweight aggregate is a meterial that can effectively reduce the weight of buildings, the strength of the aggregate itself is weak and the absorption rate is high, so the strength of the ITZ(Interfacial Transition Zone) area is weak. Therefore, it is essential to improve the interfacial area when using lightweight aggregates. In this study, an experiment was conducted to improve the adhesion between the aggregate and cement paste and to strengthen the interfacial area by coating the surface of the lighteight aggregate with Blast Furnace Slag. To confirm the improvement, compressive strength and EIS(Electrochemical Impedance Spectroscopy) measurements were perfromed. Using EIS, the change in electrical resistance of the cement hardened body was confirmed. As a result, it was confirmed that the lightweight aggregate coated on the surface showed highter compressive strength and electrical resistance than the non-coated lightweight aggregate, and that the coating material was filled in the interfacial area and inside the aggregate that helped to strengthen the compresssive strength and higher electrical resistance.
Constipation, which refers to difficulties in defecation and infrequent bowel movement in emptying the gastrointestinal system that ultimately produces hardened fecal matters, is a health concern in livestock and aging animals. The present study aimed to evaluate the potential effects of dairy-isolated lactic acid bacteria (LAB) strains to alleviate constipation as an alternative therapeutic intervention for constipation treatment in the aging model. Rats were aged via daily subcutaneous injection of D-galactose (600 mg/body weight [kg]), prior to induction of constipation via oral administration of loperamide hydrochloride (5 mg/body weight [kg]). LAB strains (L. fermentum USM 4189 or L. plantarum USM 4187) were administered daily via oral gavage (1 × 10 Log CFU/day) while the control group received sterile saline. Aged rats as shown with shorter telomere lengths exhibited increased fecal bulk and soften fecal upon administration of LAB strains amid constipation as observed using the Bristol Stool Chart, accompanied by a higher fecal moisture content as compared to the control (p < 0.05). Fecal water-soluble metabolite profiles showed a reduced concentration of threonine upon administration of LAB strains compared to the control (p < 0.05). Histopathological analysis also showed that the administration of LAB strains contributed to a higher colonic goblet cell count as compared to the control (p < 0.05). The present study illustrates the potential of dairy-sourced LAB strains as probiotics to ameliorate the adverse effect of constipation amid aging, and as a potential dietary intervention strategy for dairy foods including yogurt and cheese.
최근 들어 건축구조물은 초고층화 및 대규모화 하는 경향에 있으며, 콘크리트 기술의 발달로 인하여 철근콘크리트 구조로 초고층 건축물을 축조하는 것이 일반화 되어 가고 있는 실정이다. 초고층 건축물에 적용되는 철근콘크리트주조는 고유동·고강도 콘크리트가 적용되기 때문에 시공성이 향상되고 단면축소가 가능하게 되었다. 또한 철근콘크리트구조의 초고층 건축물에는 슬라이딩폼, ACS(Auto Climbing Form) 등 시스템 거푸집을 적용하기 때문에 시공의 신속성을 기할 수 있으며, 철골구조보다 저렴한 가격에 내화·내진 등 우수한 품질로 빠른 시일 내에 완성할 수 있게 되었다. 그러나 초고층 건축물을 철근콘크리트 구조로 시공할 경우는 자중이 커지게 된다는 단점을 가지게 된다. 이러한 단점을 보완하고자 개발된 것이 경량골재(LWA, Low Weight Aggregate)이며, 최근까지 다양한 종류의 경량골재가 개발되어지고 있다. 이러한 경량골재를 이용하여 콘크리트를 제조하면 철근콘크리트 구조물의 자중을 줄일 수 있다는 장점을 가지게 되지만, 콘크리트의 강도가 줄어든다는 단점을 가진다. 이는 경량골재가 일반적인 천연골재에 비하여 낮은 강도를 가지고 있기 때문으로 최근에는 이러한 경량골재의 취약점을 보완하기 위한 연구가 진행되고 있다. 본 연구에서는 경량골재 표면코팅 유무에 따른 시멘트 경화체의 강도특성을 알아보기 위한 실험적 연구를 진행하였다. 그 결과, 압축강도는 표면코팅 한 경량골재가 코팅하지 않은 경량골재보다 높은 강도발현을 나타냈으며, 물/시멘트 비 50 %에서 표면코팅 경량골재가 높은 압축강도를 발현하는 것을 알 수 있었다. 이는 표면코팅 경량골재 혼입 시멘트 경화체의 계면 공극이 고로슬래그 미분말 입자로 메워졌기 때문인 것으로 확인되었다.
Purpose: The aim of this qualitative study is to explore the health problems and coping experiences of middle-aged and elderly women in the community. Methods: A total of five focus group interviews were conducted with three groups of middle-aged and two groups of elderly women. All interviews were recorded and transcribed. Data were analyzed using the content analysis method. Results: Health problems were categorized as confusion caused by problems that are difficult to handle alone in the middle-aged group and suffering originated by confronting changes in roles and environment in the elderly group. The health problems included stress, suffering, anxiety and social withdrawal as subcategories for the middle-aged women, and the stress, sense of loss, fear, and limited social activities caused by their life events for the elderly women. Meanwhile, the contents of categories about coping were revealed as the beginning of care for the body and mind for healthy life in the middle-aged group and active practice with insight into a healthy lifestyle in the elderly group. While the middle-aged women focused on themselves, attempted changes and started to take care of themselves, the elderly women interacted with the outside world, hardened their mind, made efforts for a dignified death, and managed health by their own methods. Conclusion: There were differences in the experiences of middle-aged and elderly women in accepting their health problems and coping. Nursing interventions reflecting these findings can help to manage and promote the health of middle-aged and elderly women based on an integrated perspective.
Kim, Ji-Hoon;An, Yang-Jin;Mun, Kyung-Ju;Hyung, Won-Gil
한국건축시공학회지
/
제18권3호
/
pp.305-312
/
2018
This study is about the development of a non-sintered binder (NSB) which does not require a sintering process by using the industrial by-products Phosphogypsum (PG), Waste Lime (WL) and Granulated Blast Furnace Slag (GBFS). In this report, through SEM analysis of the NSB paste hardening body, micropore analysis of paste using the mercury press-in method and microstructure observation were executed to consider the influence of the formation of the pore structure and the distribution of pore volume on strength, and the following conclusions were reached. 1) Pore structure of NSB paste of early age is influenced by hydrate generation amount by GBFS and activator. 2) Through observing the internal microstructure of NSB binder paste, it was found that the strength expression at early age due to hydration reaction was achieved with a large amount of ettringite serving as the frame with C-S-H gel generated at the same time. It was confirmed that C-S-H gel wrapped around ettringite, and as time passed, the amount generated continually increased, and C-S-H gel tightly filled the pores of hardened paste, forming a dense network-type web structure. 3) For NSB-type cement, the degree of formation of gel pores below $10{\mu}m$ had a greater influence on strength improvement than simple pore reduction by charging capillary pores, and the pore size that had the greatest effect on strength was micropores with diameter below $10{\mu}m$.
국내의 하수관거 보수공사는 주로 전면굴착과 같은 개착식 공법이 사용되고 있다. 이러한 공법은 도로의 굴착에 따른 시간과 비용의 증가, 교통통제로 인한 민원발생 및 교통지정체 등 많은 문제점을 발생시키고 있다. 이러한 문제점을 해결하기 위하여 본 연구에서는 비굴착공법에 사용 가능한 하수관거 보수자재에 대한 실험을 시행하였다. 사용한 재료는 수지계열의 폴리우레탄수지로 액상형과 경화몰드로 제작한 시편, 그리고 폴리우레탄 수지 CIPP 등이다. 국가표준시험 방법을 적용하여 기본 물성 평가를 시행하였다. 폴리우레탄 수지는 인체에 무해하고, 현장 시공시 악취 등 대기오염물질 발생이 없는 것으로 나타났다. 폴리우레탄 수지의 점도, 가사시간, 겔화시간 등 측정항목 모두 표준 규격을 만족하는 것으로 나타났다.
최근 환경에 대한 관심이 증대되면서 지반보강 재료의 친환경성이 강조되며, 이에 따라 각종 지반주입 재료가 개발되고 있으나 건설현장에서는 대부분 물유리계 재료가 활용되고 있다. 또한 최근 선진국에서는 물유리계 지반 주입재의 단점인 내구성 문제를 해결하기 위하여 여러 가지 공법을 개발하고 있는 실정이다. 본 연구에서는 기존 그라우트 재료의 문제점을 향상시키기 위하여 친환경적인 무기계 가소성그라우팅 재료에 대한 실내 시험을 통해 그라우팅 재료의 공학적 특성을 파악하고자 하였다. 실내시험에서는 그라우팅 재료의 사용량에 따른 점성, 가소성, 압축강도 및 환경영향평가에 대한 검토를 수행하여 최적 배합에 대한 범위를 설정하고, 설정된 배합의 현장적용을 통해 기존의 그라우팅 재료보다 경제적, 공학적으로 우수한 그라우트 재료에 대하여 평가하고자 한다.
International Journal of Industrial Entomology and Biomaterials
/
제38권2호
/
pp.38-50
/
2019
We investigated the developmental characteristics and life cycle of the lawn cutworm, Spodoptera depravata (Lepidoptera: Noctuidae), which is one of the most important pests causing economic damage in grass production. For larval culture, we provided the zoysiagrass at $25^{\circ}C$ and $60{\pm}5%$ humidity. The durations of the developmental stages were as follows: $4.11{\pm}0.19$ days for eggs, $25.17{\pm}3.02$ for larvae, $8.80{\pm}0.28$ for pupae, and $7.57{\pm}0.95$ for adults. We grew the larvae to the 7th instar stage, unlike previous studies, in which it was assumed that the 6th instar was the final age. There was a significant positive correlation between the body length and head capsule width of each instar larvae. In terms of morphology, the eggs changed from light green immediately following oviposition to black as they developed, and the grass-fed larvae changed from light yellow immediately after hatching to green as development continued. We observed a pattern of black spots at regular intervals on the dorsal sides of the abdomens of the final instar larvae. Furthermore, we detected two notable designs on the dorsal side of the front of the head. The pupal colors changed from light brown and green immediately after pupation, to dark brown as the pupal cuticle hardened. The wingspans of the adults were similar in both sexes. However, the forewings of the males had obvious outer lines and eyespots with dark gray-brown backgrounds, whereas the corresponding features on the female forewings were less obvious. The oviposition preperiod was 2.11 days, the oviposition period was 4.2 days, the average fecundity per female was approximately 341 eggs, and the hatching rate was approximately 76.1%.
With the prolonged Covid-19 epidemic, movement restrictions such as social distancing are prolonged, and as people stay indoors for a longer time, interest in indoor air pollution is increasing. Indoor air quality is not easily purified unlike outdoors. Among indoor building materials, paints and flooring contain formaldehyde that causes sick house syndrome and VOCs that contain carcinogenicity and harmfulness. For modern people who spend a lot of time living indoors for more than an hour, the occurrence of these harmful substances can be said to be fatal. In response to these risks, in July 2019, the government reinforced the standards for indoor air quality to protect the public's health by raising the detection standards for fine dust, ultrafine dust, and formaldehyde in indoor multi-use facilities. People use machines such as air purifiers to improve indoor air quality, or make efforts such as periodic ventilation. In order to reduce or support these other ancillary efforts more effectively, to reduce the generation of pollutants in the building itself, or to adsorb or purify pollutants in the air, use carbon black as an admixture to make a cement hardened body, and to grasp basic physical properties and adsorption capacity. And the result is as follows. As a result of the experiment to determine the appropriate amount of carbon black, it was confirmed that the more the amount of carbon black was added, the better it was in the formaldehyde emission test, but the tendency was not clear when measuring the flexural strength, so a further experiment to improve this is needed.
Nitinol, a shape memory alloy (SMA), is manufactured from titanium and nickel and it used in various fields such as electrical applications, micro sensors. It is also recommended as a material in medical for implant because it has excellent organic compatibility. Nitinol is intended to be inserted into the human body, products require a high-quality surface and low residual stress. To overcome this problems, explore electrolyte polishing (EP) is being explored that may be appropriate for use with nitinol. EP is a particularly useful machining method because, as a non contact machining method, it produces neither machining heat nor internal stress in the machined materials. Sandpaper polishing is also useful machining method because, as a contact machining method, it can easily good surface roughness in the machined materials. The electrolyte polishing (EP) process has an effect of improving the surface roughness as well as the film polishing process, but has a characteristic that the residual stress is hardly generated because the work hardened layer is not formed on the processed surface. The sandpaper polishing process has the effect of improving the surface roughness but the residual stress remains in the surface. We experimented with three conditions of polishing process. First condition is the conventional polishing. Second condition is the electrochemical polishing(EP). And Last condition is a mixing process with the conventional polishing and the EP. Surface roughness and residual stress of the nitinol before a polishing process were $0.474{\mu}mRa$, -45.38MPa. Surface roughness and residual stress of the nitinol after mixing process of the conventional polishing and the EP were $1.071{\mu}mRa$, -143.157MPa. Surface roughness and residual stress of the nitinol after conventional polishing were $0.385{\mu}mRa$ and -205.15MPa. Surface roughness and residual stress of sandpaper and EP nitinol were $1.071{\mu}mRa$, -143.157MPa. The result shows that the EP process is a residual stress free process that eliminates the residual stress on the surface while eliminating the deformed layer remaining on the surface through composite surface machining rather than single surface machining. The EP process can be used for biomaterials such as nitinol and be applied to polishing of wafers and various fields.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.