• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.413-422
• /
• 2022

Blast Hardened Bulkheads (BHB) are used to suppress damage propagation by internal explosions to reduce ships'vulnerability. However, for this reason, the weight of the ship inevitably increased, and other functions such as the ships'mobility were bound to deteriorate. Therefore, it is essential in the initial design of the ship to optimize the dimensions of the bulkhead to minimize the weight while decreasing the vulnerability of the ship. Research on design optimization of BHB has been conducted, but it has not considered explosive load in various hit scenarios. This study proposed an optimal design method for the curtain plate type blast hardened bulkhead, which is currently frequently applied by the Korean Navy in consideration of various hit scenarios. Using genetic algorithms, multiobjective design optimizations that minimize weight increase as well as minimize damage to ships were obtained. By optimizing the dimensions of the BHB considering various hit scenarios, the ship's vulnerability was improved while maintaining its mobility due to weight reduction.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.1
• /
• pp.10-19
• /
• 2023

Blast Hardened Bulkhead (BHB) is an important measure that can increase the ship's survivability as well as protect the lives of the crew by mitigating the damage extent caused by an internal explosion in the ship. In particular, both the pressure and the shock impulse should be considered when designing the BHB against reflected shock waves having a high pressure with a short duration. This study proposes a design method for BHB that considers both the pressure and the shock impulse generated during the internal explosion. In addition, analysis and design concepts for accident loads such as explosion, fire, and collision of NORSOK and DNVGL, one of the international design guidelines for the curtain plate type blast hardened bulkhead type applied by the Korean Navy, are utilized. If this method is applied, it is expected that it can be used as a design concept for the pressure as well as the shock impulse of the explosion load of the curtain plate.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.58-69
• /
• 2014

To cope with sever accident like Fukushima accident, the emergency response system is needed. It consist of the hardened I&C system and the mobile control station. The hardened I&C system monitors the state in the nuclear power plant and controls the emergency equipment such as valves, pumps and the mobile control station placed at 30km away from nuclear power plant receives the status information from the hardened I&C system and transmits the control data to the hardened I&C system. In this paper, we design the emergency communication system connecting the hardened I&C system to the mobile control station and analyze the performance of the system. This system consists of the terrestrial communication system and the satellite communication. The performance such as a communication link budget, throughput and delay time is analyzed for each system.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.27-37
• /
• 2011

Recently, pressure grouting is widely being used in construction site for strength improvement of ground and water proof, reinforcement and so on. It is necessarily required to estimate an appropriate injection pressure and injection time for economical and reasonable construction in the site through the size and shape of the hardened grout measured according to ground condition. However, sampling for the hardened grout is time-consuming and needs high cost on preliminary test in the site. The system which could predict the size and shape of the hardened grout does not exist until now. Thus, numerical method based on VOF method and porous model was used for the calibration chamber injection test with injection pressure (50 kPa, 100 kPa, 150 kPa) in this study. The results indicate that the numerical technique based on VOF method and porous model among CFD analysis is expected to be a basic study for the prediction of the behavior and solidification of pressure grouting.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.429-436
• /
• 2013

This study considers how the fatigue behavior and probabilistic properties of SAE1055 steel are related to its hardness level. SAE1055 steel was heat-treated using induction hardening. Five types of specimens were prepared (A: base material, B: through hardened material with HV390, C: through hardened material with HV510, D: through hardened material with HV700, and E: surface hardened material with HV700). Fatigue tests were performed under a stress ratio of R = -1 using a 4-point rotary bending fatigue tester. The fatigue behaviors were greatly influenced by the hardness, but the fatigue limit did not increase over a hardness of HV510. In addition, the effect of the hardness level on the failure mechanism was evaluated using a scanning electron microscope. The probabilistic properties of the fatigue life were investigated using a probabilistic S-N approach, and the effect of the hardness level on these properties was evaluated using a residue analysis.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1176-1181
• /
• 1998

Characteristics of high frequency induction- hardened bearing steel have been investigated using 0.55wt.% C-1.68wt.% Mn specimens produced by vacuum induction melting (VIM). The K4 value in DIN 57602 of the specimens was assessed to be 6.41, high level of cleanliness. The specimens were high frequency induction-hardened to form heterogeneous submicron- lath martensite in the surface hardened layer with about 2.5mm in effective depth. Rolling contact fatigue tests were conducted in elasto-hydrodynamic lubricating conditions under a maximum Hertzian contact stress of$ 492kgmm^{-2}$ . It was found that microhardness in the subsurface, up to about $500\mu\textrm{m}$ in depth, below the raceway of rolling contact fatigued specimens was increased in comparison with that of induction-hardened layers. The depth of maximum microhardness- increased region was about $100\mu\textrm{m}$ from surface, showing white etching area. Crack initiation and propagation in the white etching area below the raceway of rolling contact fatigued specimens were observed.

• Advances in Computational Design
• /
• v.7 no.1
• /
• pp.57-68
• /
• 2022

A simulation study of the distribution of magnetic flux induced by a U-shaped electromagnet into a two-layer massive object with variations in the depth and properties of the surface layer has been carried out. It has been established that the hardened surface layer "pushes" the magnetic flux into the bulk of the magnetized object and the magnetic flux penetration depth monotonically increases with increasing thickness of the hardened layer. A change in the thickness and magnetic properties of the surface layer leads to a redistribution of magnetic fluxes passing between the poles of the electromagnet along with the layer and the bulk of the steel object. In this case, the change in the layer thickness significantly affects the magnitude of the tangential component of the field on the surface of the object in the interpolar space, and the change in the properties of the layer affects the magnitude of the magnetic flux in the magnetic "transducer-object" circuit. This difference in magnetic parameters can be used for selective testing of the surface hardening quality. It has been shown that the hardened layer pushes the magnetic flux into the depth of the magnetized object. The nominal depth of penetration of the flow monotonically increases with an increase in the thickness of the hardened layer.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.245-250
• /
• 2003

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL (Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.791-794
• /
• 1999

Exact estimation of cement content in a hardened concrete can provide useful data to evaluate the quality and strength of the concrete and might be used to inspect the quality of precast concrete secondary products. Observation obtained in this research included : (1) the volume of coarse aggregate in the hardened concrete measured by the area comparison method has a high accuracy ; (2) the cement content in the mortar and the X-ray intensity of Ca-K$\alpha$ have a correlation factor of 0.96 ; (3) the cement content in the ready mixed concrete was estimated with high accuracy such as correlation factor of 0.99 and standard deviation of 0.64.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.88-93
• /
• 2001

As the development of High Speed Machining, It is applied in many fields of manufacturing. Among them is to manufacture die and mold. But it still remains as a hard-to-work to apply it in machining pre-hardened materials such as hardened QRO90. It also difficult to machine new materials because there is no machining date of them. Therefore, in this study, we are trying to improve the machinability of new material, QRO90 by applying various cutting conditions, and selecting the best condition which not only reduce the machining time but improve the quality of die and mold made of QRO90 material.