• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.673-680
• /
• 2019

GAP or GAP-co-BO based energetic thermoplastic elastomers (ETPEs) were synthesized by changing the hard segment content percent in the range of 30~45% by 5% difference. Thermal and mechanical properties of GAP-co-BO based ETPEs were compared to those of GAP based ETPEs. FT-IR results showed that the capability of forming hydrogen bond increases with increasing the hard segment content in GAP/GAP-co-BO based ETPE, and also the GAP-co-BO based ETPEs are stronger than GAP based ETPEs in the hydrogen bond formation. DSC and DMA results showed that the glass transition temperature (T_g) of GAP based ETPEs increased with the increment of the hard segment content, while the T_g of GAP-co-BO based ETPEs was maintained even the hard segment content increased. The storage modulus at room temperature of the GAP-co-BO based ETPEs was higher than that of the GAP based ETPEs. This was due to the strong phase separation behavior of the hard and soft segment of GAP-co-BO based ETPEs, which further resulted in the stronger breaking strength and lower tensile elongation at break point for GAP-co-BO based ETPE than the GAP based one.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.253-259
• /
• 2005

Polyurethanes, synthesized by polyester polyols and aliphatic or aromatic diisocyanates for a crease resist finishing agent, were prepared by two-step reactions, that is, prepolymer synthesis and chain extension. The structures of synthesized polyurethanes were confirmed by the measurement of FT-IR and $^1H$-NMR spectrometer. The number average molecular weight ($\bar{M}_n$) and the weight average molecular weight ($\bar{M}_w$) of the polyurethane with aromatic diisocyanate (MDI) were higher than those of the synthesized polyurethanes with aliphatic diisocyanate (HDI, $H_{12}MDI$). The glass transition temperatures ($T_g$) of soft segments in polyurethanes with MDI, HDI, $H_{12}MDI$ were -25,-42 and -50$^{circ}C$, respectively. In the polyurethanes obtained by two-step reaction, thermal stability and tensile strength increased with increasing hard segment contents, whereas elongation at break decreased with increasing hard segment contents.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.35-40
• /
• 1999

The variations of the glass transition, melting peaks, molecular weight and its distribution (polydispersity index: PI) due to the annealing temperature and time have been investigated using the thermoplastic segmented polyurethanes (TPUs) and its blends based on the contents of hard segment. The position of the melting peak and its magnitude have been increased with the annealing temperature and time. This may be arised from the rearrangement of the microdomain structure due to the long-range or short-range segmental motion, the order-disorder transition of non-crystalline microphase, the variation of the domain size or the degree of disorder of crystalline structure by given different thermal histories. The annealing temperature and time affected the molecular weights and polydispersity : the number and weight average molecular weights were increased, while the polydispersity index (PI) deceased at certain temperatures : for TPU-35 at $135^{\circ}C$, for TPU-44 at $170^{\circ}C$ and for TPU-53 at $180^{\circ}C$. The temperatures which give the variations in molecular weights and in PIs are consistent with the annealing temperatures of which $T_3$ solely exists for each sample. Thus it is suggested that the chain dissosiation and recombination simultaneously occur at the above mentioned temperature for each sample.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.44-51
• /
• 2005

Polyurethane-polysiloxanes (PU/PDMS) was synthesized using 4,4'-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (BD) to overcome the weakness to the organic chemicals. The composite membranes were prepared onto porous poly(tetrafluoroethylene) (PTFE) supports. In vapor permeation experiments, the flux increased with increasing operating temperatures and feed concentrations while the separation factors showed the opposite trend, so-called 'trade-off'. In this study, the effect of the flux on the operating temperatures was not severe since the content of the soft segments is fairly higher than that of the hard segments. The composite membrane type of PU/PDMS maintained high flux and separation factor as well when comparing with the dense type membranes.

• Korean Journal of Cleft Lip And Palate
• /
• v.15 no.2
• /
• pp.89-96
• /
• 2012

Le Fort 1 osteotomy or maxillary advancement with distraction osteogenesis (DO) is main treatment strategy for cleft palate patients with maxillary hypoplasia. Maxillary DO allows greater maxillary advancement within physiological limit than Le Fort 1 osteotomy. Moreover, it is better for velopharyngeal function. However, there is a greater tendency for an increase in nasal sound when maxilla is advanced excessively. Therefore, the advancement of anterior maxillary segment using DO has been utilized. It offers advantages such as an increase in the length of the palate, a prevention of the change in palatopharyngeal depth, and a preservation of the velopharyngeal function. Moreover, it will obliterate the necessity of bone graft, and it prevents the occurrence of oronasal or oroantral fistula. Finally, it stimulates the regeneration of the soft and hard tissue of alveolus, and subsequently makes possible to place implant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.76-85
• /
• 2019

Recently, various investigation of vegetable oil which is extracted from natural resources is being progressed because of its low cost and environmental aspect. However, double bonds in vegetable oil should be substituted to other high reactive functional group due to its low reactivity for synthesizing bio-polymeric materials. ${\alpha}$-eleostearic acid, which is consist of conjugated triene, is the main component of tung oil, and the conjugated triene allows tung oil to have higher reactivity than other vegetable oil. In this study, tung oil is copolymerized with styrene and divinylbenzene to make thermoset resin without any substitution of functional group. Thermal and mechanical properties are measured to investigate the effects of the composition of each monomer on the synthesized thermoset resin. The result shows that the products have only one Tg, which means the synthesized thermoset resins are homogeneous in molecular level. Mechanical properties show that tung oil act as soft segment in the copolymer and make more elastic product. On the other hand, divinylbenzene acts as hard segment and makes more brittle product.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.24-30
• /
• 2018

Various investigations of vegetable oil extracted from natural resources are underway because of their low cost and environmental value. On the other hand, the double bonds in vegetable oil should be substituted to other high reactive functional groups due to their low reactivity for synthesizing bio-polymeric materials. ${\alpha}$-eleostearic acid, which consists of a conjugated triene, is the main component of tung oil, and the conjugated triene allows tung oil to have higher reactivity than other vegetable oils. In this study, tung oil was copolymerized with styrene and divinylbenzene to make a thermoset resin without any substitution of functional groups. The thermal and mechanical properties were measured to examine the effects of the composition of each monomer on the synthesized thermoset resin. The results showed that the products have only one Tg, which means the synthesized thermoset resins are homogeneous at the molecular level. The mechanical properties show that tung oil acts as a soft segment in the copolymer and makes a more elastic product. On the other hand, divinylbenzene acts as a hard segment and makes a more brittle product.

• Elastomers and Composites
• /
• v.57 no.1
• /
• pp.13-19
• /
• 2022

Polycarbonate diol-based waterborne polyurethane (WPU) was prepared by prepolymer mixing process. The prepolymer mixture contained the polycarbonate diol, isophorone diisocyanate (IPDI), dimethylol propionic acid, triethylamine, and ethylenediamine (EDA). The NCO/OH ratio in the prepolymer was adjusted by controlling the molar ratio of IPDI, and its effects on the properties of WPU were studied. The structure of WPU was characterized by fourier transform infrared spectroscopy. The average particle size increased and viscosity decreased with increasing NCO/OH ratio and EDA content in WPU. The reduced phase separation between soft and hard segments increased glass transition temperature. The reduction in the thermal decomposition temperature could be attributed to the low bond energy of urethane and urea groups, which constituted the hard segment. Additionally, the polyurethane chain mobility was restricted, elongation decreased, and tensile strength increased. The hydrogen bond between the hard segments formed a dense structure that hindered water absorption.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.475-483
• /
• 2003

The purpose of this study is to evaluate hard and soft tissue changes following the subapical osteotomy in bimaxillary dentoalveolar protrusion patients requiring maximal retraction adult female patients was selected. Surgical procedures were performed by the same surgeon, anterior subapical osteotomy techniques were employed on the maxilla and cephalometric radiograms were traced and superimposed using the best-fit method and two reference The results were as follows 1. The bodily movement of the maxillary anterior segment was achieved in a posterior moved posteriorly with a slight correction of the lower incisors. 2. The horizontal soft tissue measurements changed significantly after treatment, but Nt and Sn vertical soft tissue measurements indicated that Ls moved inferiorly and Li superiorly. 3. The correlation between hard and soft tissue changes indicated that ${\Delta}HId/{\Delta}HLi,\;{\Delta}HId/{\Delta}LL-Eline,\;{\Delta}Hpt.B/{\Delta}HILS,\;and\;{\Delta}UI-FH/{\Delta}NL$ were significant. 4. More lower lip relative to upper lip retraction was demonstrated in relation to Rickett's E-line. The ratio between upper lip displacement was $50\%$, and between the lower incisor and lower lip displacement was $60\%$. We conclude from the results that the anterior subapical osteotomy is an efficient treatment severe dentoalveolar protrusion and desire rapid results.

• Clean Technology
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2006

In this study, aqueous polyurethane dispersion(PUD) was synthesized using polyhexamethylene carbonate glycol (PHMCG) as soft segment, isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as hard segment. Also, polyurethane/clay nanocomposites were prepared by adding pristine montmorillonite (PM) and organically modified clays, C15A and C30B into PUD. The degree of clay dispersion in the nanocomposites was investigated using XRD and the physical and thermal properties were examined through UTM and TGA. These results showed that nanocomposites with C15A gave higher physical and thermal properties than those with C30B or PM. As a result, the properties of nanocomposites were observed to vary depending on the types of clay modifiers and clay contents.