• 화약ㆍ발파
• /
• 제8권2호
• /
• pp.3-17
• /
• 1990

The Caustious blasting have often increased Complaints of ground Vibration and Sound when the Wire-Tunnel Constructed in Pusan. In order to prevent the influence to housing structure, it was necessary to predict blasting-Induced Vibration and Sound. The Suveyer determined the Burden and spacing of Drill holes, minimum delay charges within a allowable Vibration and Sound Level. Tunnel drilling and Ignition patterns are made as follows; No. 1 Tunel (Stable rock, hard rock) No.2 Tunnel (Instable plastic rock; wethered rock) and other Tunnels (Instable rock). The result of 1st testing blasting of No. 1 Tunnel was recorded Under allowable Vibration Level but sound was over 75 Db of allowable value. So Tunnel drilling pattern was amended with 52 Non-charg holes to reduce the blast-sound. The other pattern had no need to amend.

• 화약ㆍ발파
• /
• 제23권1호
• /
• pp.55-64
• /
• 2005

근래 건설$\cdot$토목 현장에서는 인가절감 덴 안전사고를 방지하기 위하여 보다 안전하고 저렴한 폭약인 Emulsion 폭약이 기존의 CD계열의 폭약을 상당부분 대체해 가고 있는 실정이다. 그러나 현실적으로 경암 이상의 암반에 건설되는 터널에서는 Emulsion폭약 적용시 발파위력 면에서 그 한계에 봉착하고 있다. 따라서 본 연구에서는 고성능 Emulsion 폭약인 MegaMEX를 국내 경암 이상의 암반에 적용하여 발파효율 및 시공성 등을 검증해 보고자 하였다. 적용결과 굴진율, 파쇄도 등 발파효율 면에서 기존 Emulsion 폭약의 한계를 뛰어넘어, GD(Gelatin dynamite)계 열의 폭약인 MegaMITE와 근접한 수준의 발파효율을 나타내었으며, 환경적인 측면에서도 유리한 것으로 나타났다.

• 한국소음진동공학회논문집
• /
• 제19권3호
• /
• pp.313-319
• /
• 2009

The blasting has a lot of economic efficiency and speediness but it can damage to a neighbor structure, a domestic animal and a cultured fish due to the blasting vibration, then the public grievance is increased. Therefore, we need to manage the blasting vibration efficiently. The prediction of the correct vibration velocity is not easy because there are lots of different kinds of the scale of blasting vibration and it has a number of a variable effect. So we figure the optimum line through the least-squares regression by using the vibration data measured in hard rock blasting and compared with the design vibration prediction equation. As a result, we confirm that the vibration estimated in this paper is bigger than the design vibration prediction equation in the same charge and distance. If there is a Gaussian normal distribution data on the left-right side of the least squares regression, then we can estimate the vibration prediction equation on reliability 50%(${\beta}=0$), 90%(${\beta}=1.28$), 95%(${\beta}=1.64$). 99.9%(${\beta}=3.09$). As a result, it appears to be suitable that the reliability is 99% at the transverse component, the reliability 95% is at the vertical component, the reliability 90% is at the longitudinal component and the reliability is 95% at the peak vector sum component.

• 터널과지하공간
• /
• 제10권2호
• /
• pp.211-217
• /
• 2000

본 연구는 대구지역의 대표적인 암석들을 대상으로 일축압축시험 등의 실내 시험과 현장 탄성파속도 시험 등을 실시하여 역학적 특성을 규명하였고, 달서구 성서지역에서 시험발파를 실시하여 발파진동계수를 도출하였다. 그 결과 대구지역의 경상계 퇴적암류는 풍화암에서 경암까지의 다양한 강도 특성을 보였고, 화산암류인 안산암은 경암에서 극경암에 해당되는 것으로 나타났다. 또한 풍화암 내지 보통암에 해당되는 성서지역의 시험발파 결과 발파진동계수 K는 114.8, n은 1.48로 계산되었다.

• 화약ㆍ발파
• /
• 제28권1호
• /
• pp.40-54
• /
• 2010

메사쉴드공법은 주로 풍화토 또는 풍화암 구간의 소규모 굴착단면에 적용되며 대부분 인력굴착으로 이루어지나 막장면에 암반이 노출되면 유압력을 이용한 할암공법이나 발파공법의 적용이 불가피하다. 본 연구에서는 메사쉴드공법이 적용된 소규모 굴착단면 터널에서 터널상부에 상수도관 및 가스관 등이 근접되고, 강도가 높은 암반 노출로 인해 할암공법 대신에 125g의 최소장약량으로 심발공에서 초기진동을 제어하는 발파공법을 소규모 굴착단면 터널에 적용한 사례이다.

• 기술사
• /
• 제18권3호
• /
• pp.1-20
• /
• 1985

The traffic congestion of Seoul city has been one of the most serious problems to be settled since the advent of 1970s. As a means to mitigate traffic mess, the authority concerned launched the construction of subway line 3 and 4 in 1980. The two Subway lines slated for completion by 1985 cross each other and run north-south direction, passing through the metropolitan area of Seoul city fraught with high-rise edifices and large-scale shopping centers, and, in order to reduce blasting vibration, NATM was executed for a distance of 10 Km, instead of ASSM previously employed when subway line 1 and 2 were constructed. Tunnel blastings were implemented, preceded by classifying the rocks at construction area into five categories, namely, hard rock, semi-hard rock, weak rock weathered rock and silt and by calculating their respective specific charges through standard test blastings, by employing the pre-splitting and smooth blasting with drilling patterns of burn cut type, so as not to cause damages to surface structures. Most of explosives used were the slurry of low specific gravity and low velocity, and the firings executed by the use of milli-second detonators. Empiric formula were also formulated to check blasting vibrations, based on the vibration allowable values of West Germany standard, for the application to vulnerable construction zones. Should the two lines be placed for public service in 1985, about 40% of the total traffic population of Seoul city amounting to 15 million as of 1984 is estimated to be carried by subway with no difficulties.

• 터널과지하공간
• /
• 제6권3호
• /
• pp.197-208
• /
• 1996

Due to the constraints in pre site-investigation for tunnel, it is essential to redesign the support structures suitable for rock mass conditions such as rock strength, ground water and discontinuity conditions for safe tunnel construction. For the selection of optimum support, it is very important to carry out the rock mass classification and in-situ measurement in tunnelling. In this paper, in a mountain tunnel designed by NATM in hard rock, the selectable system for optimum support has been studied. The tunnel is situated at Chun-an in Kyungbu highspeed railway line with 2 lanes over a length of 4, 020 m and a diameter of 15 m. The tunnel was constructed by drill & blasting method and long bench cut method, designed five types of standard support patterns according to rock mass conditions. In this tunnel, face mapping based on image processing of tunnel face and rock mass classification by RMR carried out for the quantitative evaluation of the characteristics of rock mass and compared with rock mass classes in design. Also, in-situ measurement of convergence and crown settlement conducted about 30 m interval, assessed the stability of tunnel from the analysis of monitoring data. Through the results of rock mass classification and in-situ measurement in several sections, the design of supports were modified for the safe and economic tunnelling.

• 화약ㆍ발파
• /
• 제8권1호
• /
• pp.3-16
• /
• 1990

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill $\varphi{70mm}$ on the calcalious sand stone(sort-moderate-semi hard Rock). The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites (m) W : Maximum Charge per delay-period of eighit milliseconds or more(Kg) K : Ground transmission constant, empirically determind on th Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity $D/W^b$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m----under l00m----- $V=41(D/3\sqrt{W})^{-1.41}$ -----A Over l00m-----$V= 121(D/3\sqrt{W})^{-1.66}$-----B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 화약ㆍ발파
• /
• 제9권4호
• /
• pp.3-12
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M /S delay caps. Drill depth was from 3m to 6m with Crawler Drill 70mm on the calcalious sand stone (soft-moderate-semi hard Rock) . The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to Propagation Law in blasting vibration as follows .Propagtion Law in Blasting Vibration V=k(D/W/sup b/)/sup n/ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W ; Maximum Charge per delay -period of eight milliseconds or more(Kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D/W/sup b/ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three groups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is varified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m--under 100m----V=41(D/ W)/sup -1.41/-----A Over l00m---------V=121(D/ W)/sup -1.56/-----B K value on the above equation has to be more specified for furthur understand about the effect of explosives. Rock strength, And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 화약ㆍ발파
• /
• 제37권2호
• /
• pp.22-30
• /
• 2019

화약을 이용하여 작업하는 현장에서는 발파에 의해 발생되는 소음과 진동의 영향으로 작업상 많은 제약을 받는다. 최근에 민원 발생 증가 및 보안물건에 대한 환경규제 기준이 대폭 강화되고 있는 추세이다. 때문에 보안물건이 근접해 있는 경우 일반적으로 기계식굴착에 의해 작업이 이루어지고 있다. 기계식굴착 공법은 발파공법에 비해 소음과 진동을 저감시키는 장점을 갖고 있으나 굴착하고자 하는 암반의 상태에 따라서 계획 보다 시공성이 떨어지는 경우가 발생되기도 한다. 일반적으로 굴착암이 극경암에 가까울수록 시공성이 낮아진다. 본고에서는 전자뇌관을 사용하여 보안물건이 초근접해 있는 공사구간을 시공한 사례에 대해 설명하고자 한다. 당 현장은 인근에 보안물건(철도)이 근접(9.9m)해 있어 암파쇄 굴착공법으로 설계가 되어 시공하던 중, 극경암 노출에 따른 시공성 저하 및 공사기간 단축을 위한 대안 공법으로 전자뇌관을 이용한 시공을 검토하게 되었다. 전자뇌관 이용한 발파작업으로 주변 보안물건에 미치는 영향을 최소화 하면서 시공성과 경제성을 극대화 할 수 있었다. 한화에서 생산하는 하이트로닉($HiTRONIC^{TM}$)은 혁신적인 안정성과 높은 기폭 신뢰성을 갖고 있어 초정밀발파가 가능하다. 전자뇌관은 철도 및 고속도로현장, 대형 석회석 광산을 비롯한 도심지 터파기 등에서 널리 사용되고 있다.