• 대한조선학회지
• /
• 제5권2호
• /
• pp.45-50
• /
• 1968

The added mass and the added moment of inertia of a hard chine hull for heave and pitch were calculated by strip method. For the $k_2$ coefficients, Hwang's values for the straight-framed sections were used and for $k_2$ coefficients Porter's values for ellipses were used in the calculation. Comparisons on added mass and added moment of inertia of hard chine hull with those of ordinary hull form were briefly discussed. The results of the calculation for hard Chine hull give greater valves than ordinary ships at zero Froude Number. Beam draft ratio seems to be much influenced on the added mass and added moment of inertia.

• Journal of Ship and Ocean Technology
• /
• 제2권1호
• /
• pp.1-12
• /
• 1998

A method to predict the dynamic roll stability of hard-chine planing craft is presented. Starting with the equation of motion, an equation governing small roll perturbations is developed. The roll restoring moment acting on the hull is evaluated by considering “static”and dynamic contributions. The contribution of rudders and skegs, which is significant for this type of craft, is also determined. A worked example is presented to show how the method can be used to find the maximum center of gravity height for transverse stability.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.87-92
• /
• 1997

본 연구는 총톤수 89톤급 어선의 초기선형을 개발하기 위하여 한국어선협회와 공동으로 수행되었다. 각형정과 배수량형의 두가지 기본선형의 저항성능을 실험적 방법에 의해 비교 연구하였다.

• 기술사
• /
• 제16권2호
• /
• pp.1-11
• /
• 1983

The resistance property of a high speed passenger craft (: "DOL-PIN HO" designed by the author in 1972) is investigated as follows; -. The Resistance property of the craft is determined by savitsky′s method and blount-Fox′s method. The theoretical results are also compared with the full scale data. The comparison reveals that the result when using blount/fox′s method are in much closer agreement with the full scale data than savitsky′s. -. The effects of ship speed on the positions of the center of pressure and of the longitudinal center of gravity (L.C.G.) are investigated. The investigation shows that the position of L.C.G. of the craft is almost constant although the ship speed is changed. -. The effect of transom flap on the Resistance property of the craft is studied using savitsky/brown′s method. From the study it is found that the resistance of the craft is decreased and hence speed gain (about 3% of the service speed) can be obtained, when using transom flap for the craft.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.177-181
• /
• 2003

Despite various forms have been developed and applied to ship hull forms, the superiority of hard chine type over other forms of fishing boat has been recognized so far. As one of the ways of forms for new concept fishing boat, this paper presents the result of a performance evaluation for newly developed forms of hull, appendage and deck house, which features that have esthetic forms.

• 한국군사과학기술학회지
• /
• 제14권1호
• /
• pp.55-61
• /
• 2011

This paper presents bubble wake measurement results generated by the planing hull. The bubble was generated by SNAME TMB model(No. 4876) with hard chine at the CWC(Circulating Water Channel). ABS(Acoustic Bubble Spectrometer) was used to measure bubble wake measurement. The manufactured model is one meter in length and uniform velocity to generate the bubble at CWC is 3m/s, relatively higher speed than conventional hull form. Measurements were performed successfully and measured results show well the general characteristics of bubble wake generated by planing hull. Furthermore, experimental equations are proposed for the practical use.

• 수산해양기술연구
• /
• 제33권4호
• /
• pp.259-265
• /
• 1997

The new concept of hull form for G/T 19 ton class off-shore long liner was studied with the support of special research fund of Korean Ministry of Science and Technology. Newly developed hull form of semi-twin afterbody combined with part. curvilinear type forebody shows outstanding improvement in resistance performance point of view compared with hard chine form, especially at the range of high speed.

• Fibers and Polymers
• /
• 제3권4호
• /
• pp.169-173
• /
• 2002

Fabric touch was evaluated psychophysically in order to determine the relationship between mechanical properties and subjective sensation. For subjective touch sensation, eight aspects such as hardness, smoothness, coarseness, coolness, pliability, crispness, heaviness and thickness were evaluated using free modulus magnitude estimation (FEME) technique. KES-FB was used to measure the mechanical properties of fabrics. Woolen fabric with the highest values of WC and weight was evaluated as the coarsest, heaviest and thickest. While silk crepe do chine with the lowest LT, G, 2HG, thickness and weight was rated as smoother and more pliable than any other fabrics. And flax with the highest values of LT and SMD was evaluated as hard, cool and crisp. Fabric touch and satisfaction were predicted well from the mechanical properties, especially from SMD, by regression analysis. Satisfaction for touch increased as smoothness increased.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.257-257
• /
• 2017

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.320-329
• /
• 2017

In this research, we have calculated characteristics of wave-piercing high-speed planing hull, by using a RANS solver and overset grid method, for comparing with experimental measurements of that and simulating with several appendages, since the computed results of commercial CFD code look reasonable for the prediction of the performances of planing hulls on calm water in planing conditions. As a result, it is confirmed that the dynamic instability phenomena in pitch and heave motions (porpoising) occurred after a certain $Fn_V$, and effectively suppressed using some of appendages, especially the 0.5L spray rail is suppressed to 24-55 % in the pitch motion and 33-55 % in the heave motion. In spray phenomenon, 1L hard chine suppress spray effectively and it is effective to set the angle of appendages to be less than $0^{\circ}$ in order to suppress wave.