• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.9-16
• /
• 2019

The algal blooms in stagnant streams and lakes have caused many problems. Excessive algae leads to disturbance of ecosystem and overload of water treatment processes. Therefore, phosphorus(P), source of algal blooms, should be controlled. In this study, a filtration trench has been developed to convert dissolved phosphorus into hydroxyapatite(HAP) so that it could be crystallized on the surface of 'phosphorus removal granular material'; and residual particulate phosphorus could be removed by additional precipitation and filtration. The front and rear parts of filtration trench consisted of 'phosphorus removal granular material contact bed' and 'limestone filtration bed', respectively. As a result of the column test using phosphorus removal granular material and limestone serially, $PO_4-P$ was removed more than 90% when EBCT(empty bed contact time) of the contact bed was over 20 minutes; and T-P represented 60% of removal efficiency when total EBCT was over 1.5 hours. The results of column tests to figure out the sedimentation characteristics showed that more than 90% of particulate phosphorus could be removed within 24 hours. It was necessary to optimize the filtration part in order to increase removal efficiency of T-P additionally. Also, it was confirmed through the simulation of Visual MINTEQ that most of particulate phosphorus in the column tests is the form of HAP. Based on the results of the study, it could be suggested that the design parameters are over 0.5 hour of EBCT for phosphorus removal granular material contact bed and over 1.5 hours of EBCT for limestone filtration bed.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.52-61
• /
• 2019

On 30 June, 2017, the Ministry of Land, Infrastructure, and Transport announced the minimum size of parking section will be expanded in parking lots. The expansion of parking section could lead to increase in apartment prices because of increase in total area of the parking lots. It is necessary to adjust the column spacing and number in the parking lots and to apply the 8-Bay long-span parking module with good parking efficiency. According to the study, the construction cost of the 6-Bay module and 8-Bay module was almost the same. But The 8-Bay module was more economical than the 6-Bay module because of the reduction in total area of 8-Bay multi-moduel. The Result of construction cost of 8-Bay modules, Removal Deck-plate RC system was most economical. While the construction cost of PC system was higher due to increase in volume of the member, it would ensure sufficient economy by reducing the girder height to apply a pre-stress method. Also, the construction cost of hollow slab system was the highest. But it could be used as the underground parking lots for apartment, because it had the lowest cost per square meter. This Study has a academic significance by proving the applicability of the 8-Bay Module to underground parking lot of apartment. And it is expected that this study will be used as basic data to derive optimal construction method that applies 8-Bay Module.

• Clean Technology
• /
• v.16 no.4
• /
• pp.258-264
• /
• 2010

This study estimated the possibility of phosphate removal characteristics to utilize EAF(electric arc furnace) slag as submarine cover material. The major phosphate removal mechanism was a certain formation of HAP precipitation occurred by the ionization reaction between $Ca^{2+}$ and $OH^-$, which were leached from the EAF Slag. Another phosphate removal mechanism was the adsortion of EAF slag surface. As a result of $PO_4{^-}-P$ removal characteristics using continuous column reactor, $PO_4{^-}-P$ concentration decreased rapidly after 3 days and 10 days later, it show under 0.5 ppm. The result as applied in real sea water, shows that the phosphate removal effects were 93~98% by the subaqueous sediment removal using the EAF slag. In conclusion, EAF slag is useful in $PO_4{^-}-P$ removal and control and it is possible to use without additional process like crush and selection.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.119-134
• /
• 2023

An Analysis of the Choice of Wedding Time Based on the Gimundungap Theory. The purpose of this study is to research the utility and validity of wedding time selection based on the principles of Ungokgimun, a recent development of Gimundungap theory. Unlike the conventional way of choosing from common auspicious hours and days deemed available for important ceremonial occasions, Ungokgimun determines the propitious heavenly wedding time catered for a particular couple based on the birth table consisting of the four pillars of the bride- and groom-to-be. Using the Hong Guk-soo numbers which are drawn from the basic principles of oriental philosophy, it utilizes a deductive approach to wedding time choice, which is considered decisive and logical. Wedding time selection for a bride and a bridegroom is determined by auspicious combinations of matching and supporting HongGuk-soo numbers. Some relevant determining factors for the time choice are three number combination of samhap, two number combination of half-hap, latitudinal combination of yuk-hap, support and control relationships between related elements, two number punishment of hyung-sal, and three number punishment of samhyung-sal, etc. The specific auspicious palace of the spouse-to-be's luck is selected on the basis of supporting or brotherly combination of numbers which are manifested on the baseline earthly plate of the bride- and groom-to-be. This is followed by the selection of the ten-year luck, and year and month luck, and finally by the selection of auspicious day and hours. The validity of this study was verified through theoretical consideration of the Ungokgimun and practical analysis of a variety of marriage cases. It was found that the way of wedding time selection using Ungok Gimundungap was relatively more effective than other conventional methods.

• Biomolecules & Therapeutics
• /
• v.16 no.2
• /
• pp.77-81
• /
• 2008

The major aim of the Korean Pharmacogenomic Database (KPD) is to offer to users a "bridging" function, making the search for useful information easier. This database has also been established to collect unique Korean genotype data from other databases and to directly link these data to other major databases that offer more informative data. In this way, searches for information about new drug developments and easier and faster evaluation of the more complex and larger databases are possible. The KPD is located at the National Institute of Toxicological Research homepage (http://www.nitr.go.kr/nitr/contents/m134700/view.do), and offers Korean single-nucleotide polymorphism (SNP) information for 154 genes and haplotype information. It also compares the Korean SNP and haplotype frequencies with those of the other ethnic groups registered in the International HapMap. Through the Pharmacogenomic Information and Education facility, we also provide evaluators and the public with information about the concept of pharmacogenomic information, research trends, and the drug regulations of other countries. Because the drug responses of Koreans are not necessarily the same as those of Chinese or Japanese people, it is expected that the systematic operation of the KPD will allow the definition of racial differences and various genomic biomarkers (haplotypes or SNPs) for use in bridging studies and in the approval of new drugs.

• Parasites, Hosts and Diseases
• /
• v.47 no.3
• /
• pp.315-318
• /
• 2009

Quantitative fecal egg counts represented as the number of eggs per gram of feces (EPG) are generally a reliable parameter to estimate the worm burden of intestinal and hepatic parasitoses. Although Haplorchis taichui (Digenea: Heterophyidae) is one of the most common minute human intestinal flukes, little is known about the relationship between EPG and the actual worm burden in patients or the severity of the disease. In the present study, fecal samples were collected from 25 villagers in northern Thailand before and after praziquantel treatment. The EPG values of each participant were determined by the modified cellophane thick smear method, and adult worms were collected from the whole stool after the treatment. Eggs per day per worm (EPDPW) of H. taichui were estimated 82 from egg counts and expelled worms. The EPG was not well correlated with the worm burden, and a reverse correlation was observed between the EPDPW and the worm burden.

• Spatial Information Research
• /
• v.2 no.1
• /
• pp.65-74
• /
• 1994

Recently, as remote sensing is widely used for environmental monitoring, more precise quantitative analysis of remote sensing data is required. In this paper, themat ic maps of water qual i ty factors such as chlorophyll-a, transparency, and suspended sediments were presented from the high resoltion airborne remote sensing data of HapCheon Dam. Though it was difficult to explicitly correlate remote sensing data with water quality factors due to the insufficient number of ground teuth data, the presented water quality maps showed very well the overall spatial distribution of water pollution in the Lake.

• Fashion & Textile Research Journal
• /
• v.12 no.6
• /
• pp.723-735
• /
• 2010

The purpose of this study is to analyze the types of Jumoni (pouches), which takes the most quantity of traditional women's handicrafts in China, and examine figurative characteristics of them through demonstrative study focusing on collections of literature and museums. Traditional Jumoni of China included Dae, Nang, Hapo, Tu, Hap, and Chimeui. Its types included a pleated type, a covered type with a lid, an opened type without a lid, and a type that was stitched up after putting objects in it. The Jumoni had various shapes such as a polygon, a circle, and shapes imitating objects. It was used to store cosmetic utensils, sewing supplies, everyday household utensils, valuables, medicinal ingredients, flavoring materials, and so on. It had various figurative characteristics which were different from those of women's handicrafts in Korea. Based on the findings, it aims to provide basic information for developing Korean traditional accessories that make the best of Korean traditional beauty as well as add modern esthetics have both Korean traditional beauty and modern esthetics.

• Genomics & Informatics
• /
• v.5 no.4
• /
• pp.152-160
• /
• 2007

Most common diseases are caused by multiple genetic and environmental factors. Among the genetic factors, single nucleotide polymorphisms (SNPs) are common DNA sequence variations in individuals and can serve as important genetic markers. Recently, investigations of gene-based and whole genome-based SNPs have been applied to association studies for marker discovery. However, SNPs are so population-specific that the association needs to be verified. Fifty-five genes and 384 SNPs were selected based on association with disease. Genotypes of 337 SNPs in candidate genes were determined using Illumina Sentrix Array Matrix (SAM) chips by an allele-specific extension method in 364 unrelated Korean individuals. Allelic frequencies of SNPs were compared with those of other populations obtained from the International HapMap database. Minor allele frequencies, linkage disequilibrium blocks, tagSNPs, and haplotypes of functional candidate SNPs in 55 genetic disease-associated genes were provided. Our data may provide useful information for the selection of genetic markers for gene-based genetic disease-association studies of the Korean population.

• International Journal of Safety
• /
• v.1 no.1
• /
• pp.52-57
• /
• 2002

The Decomposition of NO$_2$ (nitrogen dioxide), one of the Hazardous Air Pollutant (HAP), was studied by utilizing the SPCP (Surface induced discharge Plasma Chemical Processing) reactor so as to obtain optimum process variables and maximum decomposition efficiencies. Experimental results showed that for the frequency of 10kHz, the highest deco position efficiency of 84.7% for NO$_2$ was observed at the power consumptions of 20W. The decomposition efficiency of $NO_2$ was found to be: 1) proportional to the residence times, and inversely proportional to the initial concentrations of $NO_2$; 2) the maximum when the electrode diameter was 3mm; 3) influenced by the electrode material, decreasing in the order of W>Cu>Al; and 4) proportional to the $CH_4$ content, due to which the highest efficiency of 98% was obtained with almost all the $NO_2$ removed.