• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.509-517
• /
• 2012

This paper presents control strategies for cascaded H-bridge multilevel active power filters (APFs). A current loop controller is implemented using a proportional-resonant (PR) regulator, which achieves zero steady-state error at target frequencies. The power balancing mechanism for the dc-link capacitor voltages is analyzed and a voltage balancing controller is presented. To mitigate the picket-fence effect of the conventional FFT algorithm under asynchronous sampling conditions, the Hanning Windowed-FFT algorithm is proposed for reference current generation (RCG). This calculates the frequency, amplitude and phase of individual harmonic components accurately and as a result, selective harmonic compensation (SHC) is achieved. Simulation and experimental results are presented, which verify the validity and effectiveness of the devised control algorithms.

• 음성과학
• /
• 제14권4호
• /
• pp.131-144
• /
• 2007

In an effort to improve the performance of mel frequency cepstral coefficients (MFCC), we investigate the effects of varying the parameters for the filter banks and their associated windows on speech recognition rates. Specifically, the mel and bark scales are combined with various types of filter bank windows. Comparison and evaluation of the suggested methods are performed by two independent ways of speech recognition and the Fisher discriminant objective function. It is shown that the Hanning window based on the bark scale yields 28.1% relative performance improvements over the triangular window with the mel scale in speech recognition error rate. Further work on incorporating PCA and/or LDA would be desirable as a postprocessor to MFCC extraction.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.199-202
• /
• 2002

This paper introduces the near field shading beamformer using widely known Chebyshev and Hanning window in the field of digital signal processing. The proposed shading beamformer improves the estimation of range as well as azimuth angle of targe residing in near field. A series of sensor weighting values are calculated from the FFT operation of given shading functions in time domain. This paper verifies the performance of the focused beamformer having the proposed shading sensor weights which are used to detect the range of target. Throughout computer simulations this paper exploits the performance improvement of the proposed shading beamformer as varying the frequency band of the received radiated signal along the non-uniform array.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.115-118
• /
• 2000

본 연구에서는 소형 DC 모터 완성품의 제품검사에서 객관성이 결여된 판정기준인 작업자의 청각에 의한 관능검사에 대신하여 자동 진단 시스템의 적용으로 고신뢰성을 확보하기 위하여 음향신호를 취득하여 분석하는 방법을 제안하였다. 소형 모터가 회전할 때 발생하는 음향신호를 마이크로폰으로 취득하여, 취득한 신호에 단구간 Hanning Window를 걸어 시간에 따라 이동하면서 신호의 주파수 성분을 시간에 따라 전개하는 STFT(Short-Time Fourier Transform) 기법으로 정상적인 모터와 이상인 모터에서 발생하는 음향신호를 분석하였다.

• 한국컴퓨터정보학회논문지
• /
• 제24권6호
• /
• pp.73-80
• /
• 2019

In this paper, we propose an effective dynamic range compression (DRC) method of infrared images. A histogram of infrared images has narrow dynamic range compared to visible images. Hence, it is important to apply the effective DRC algorithm for high performance of an infrared image analysis. The proposed algorithm for high dynamic range divides an infrared image into the overlapped blocks and calculates Shannon's entropy of overlapped blocks. After that, we classify each block according to the value of entropy and apply adaptive histogram modification method each overlapped block. We make an intensity mapping function through result of the adaptive histogram modification method which is using standard-deviation and maximum value of histogram of classified blocks. Lastly, in order to reduce block artifact, we apply hanning window to the overlapped blocks. In experimental result, the proposed method showed better performance of dynamic range compression compared to previous algorithms.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.153-161
• /
• 2006

A simulation program SIMULTSONIC is under development at CNDE to help determine and/or help optimize ultrasonic probe locations for inspection of complex components. SIMULTSONIC provides a ray-trace based assessment for immersion and contact modes of inspection. The code written in Visual C++ operating in Microsoft Windows environment provides an interactive user interface. In this paper, a description of the various features of SIMULTSONIC is given followed by examples illustrating the capability of SIMULTSONIC to deal with inspection of canonical objects such as pipes. In particular, the use of SIMULTSONIC in the inspection of very thin-walled pipes (with 450 urn wall thickness) is described. Ray trace based assessment was done using SIMULTSONIC to determine the standoff distance and the angle of oblique incidence for an immersion mode focused transducer. A 3-cycle Hanning window pulse was chosen for simulations. Experiments were carried out to validate the simulations. The A-scans and the associated B-Scan images obtained through simulations show good correlation with experimental results, both with the arrival time of the signal as well as with the signal amplitudes.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.560-574
• /
• 2016

This paper presents a novel method for power system harmonic estimation based on the Park transform. The proposed method firstly extends the signal to a group of three-phase signals in a-b-c coordinate. Then, a linear fitting based method is adopted to estimate the fundamental frequency. Afterwards, the Park transform is utilized to convert the three-phase signals from a-b-c coordinate to d-q-0 coordinate. Finally, the amplitude and phase of a harmonic component of interest can be calculated using the d-axis and q-axis components obtained. Simulation studies have been conducted using matrix laboratory (MATLAB) and power system computer aided design/electromagnetic transients including direct current (PSCAD/EMTDC). Simulation studies in MATLAB have considered three scenarios, i.e., no-frequency-deviation scenario, frequency-deviation scenario and the scenario in the presence of inter-harminics. The results have demonstrated that the proposed method achieves very high accuracy in frequency, phase and amplitude estimation under noisy conditions, and suffers little influence of the inter-harmonics. Moreover, comparison studies have proved that the proposed method is superior to FFT and Interpolated FFT with the Hanning Window (IpFFTHW). Finally, a popular case in PSCAD/EMTDC has been employed to further verify the effectiveness of the proposed method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.151-154
• /
• 2001

In this Paper, a new harmonic imaging technique is proposed and evaluated experimentally. In the proposed method, a weighted chin signal with a hanning window is transmitted. The RF samples obtained on each array element are individually compressed by correlating with the reference signal defined as the 2nd harmonic (2f0) component of a transmitted chirp signal generated in a square-law system. The proposed method uses the compressed 2f0 component to form an image, for which the crosscorrelation term with f0 component should be suppressed below at least -60dB. After experiment, the 6dB pulse width and peak sidelobe level of the compressed 2f0 component were 0.7us and -60dB, respectively. This result shows that the proposed method can successfully eliminate the f0 component with a single transmit-receive event and therefore is more efficient than the conventional pulse inversion (PI) method in terms of frame rate. We also observed that the 2nd harmonic compont starts to decrease for source pressure higher than 210kPa in water, which implies that SNR of the 2nd harmonic imaging using short pulses cnanot be incresed beyond a certain limit.

• Structural Engineering and Mechanics
• /
• 제75권4호
• /
• pp.435-444
• /
• 2020

Ultrasonic guided wave testing is a very promising non-destructive testing method for rails, which is of great significance for ensuring the safe operation of railways. On the basis of the semi-analytical finite element (SAFE) method, a analytical model of 59R2 grooved rail was proposed, which is commonly used in the ballastless track of modern tram. The dispersion curves of ultrasonic guided waves in free rail and supported rail were obtained. Sensitivity analysis was then undertaken to evaluate the effect of rail elastic modulus on the phase velocity and group velocity dispersion curves of ultrasonic guided waves. The optimal guided wave mode, optimal excitation point and excitation direction suitable for detecting rail integrity were identified by analyzing the frequency, number of modes, and mode shapes. A sinusoidal signal modulated by a Hanning window with a center frequency of 25 kHz was used as the excitation source, and the propagation characteristics of high-frequency ultrasonic guided waves in the rail were obtained. The results show that the rail pad has a relatively little influence on the dispersion curves of ultrasonic guided waves in the high frequency band, and has a relatively large influence on the dispersion curves of ultrasonic guided waves in the low frequency band below 4 kHz. The rail elastic modulus has significant influence on the phase velocity in the high frequency band, while the group velocity is greatly affected by the rail elastic modulus in the low frequency band.

• 대한의용생체공학회:의공학회지
• /
• 제23권1호
• /
• pp.61-72
• /
• 2002

본 논문에서는 펄스 압축 방식을 사용하여 기본주파수 성분을 효과적으로 제거하는 새로운 고조파 영상 기법을 제안한다. 제안된 기법에 의한 시스템은 가중 쳐프 신호를 송신하고 각 어레이 소자에 수신된 RF 샘플은 송신신호의 고조파 성분에 정합된 상관기를 통과함으로써 고조파 성분만을 선택적으로 펄스 압축한다. 이 때. 기본주파수 성분과 고조파 성분의 상호상관 값은 -50㏈ 이하로 억제하였다. 제안된 기법은 한번의 송수시 과정으로 기본주파수 성분을 효과적으로 제거하여 프레임 율이 기존의 펄스 반전 방식보다 우수한 방식과 우수한 해상도와 신호 대 잡음비 (SNR : Signal to Noise Ratio)를 갖는 고조파 영상을 구현하기 위해 펄스 반전을 적용한 후 펄스 압축을 수행하는 방식으로 구성된다 일반적인 펄스 송신 방식에서는 고조파 성분은 송신음압의 크기가 어느 임계값 이상이 되면 더 이상 증가하지 않고 포화되기 때문에 SNR이 제한되는 단점이 있다. 그러나 제안된 기법은 송신 가중 쳐프 신호의 길이를 늘림으로써 고조파 영상의 SNR을 임의로 증가시킬 수 있다 새로운 시스템의 성능을 컴퓨터를 이용한 모의실험과 실제실험을 통하여 검증하였다