• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.231-240
• /
• 2004

Location Based Service(LBS) system is widely used in Car Navigation Service(CNS), position tracing, tour guide, etc. Recently, the development of a mobile hardware enables us to run various application of software on small handset. Although CNS systems are widely used on personal computer, PDA and embedded machines, small display system of a mobile handset still constrains to make it difficult to developed route visualization and navigation system. In this paper, we propose a new route map visualization system on mobile handset environment for LBS system. We use modified line simplification algorithm that removes extraneous information and places more emphasis on the turning point. We also adopted level of detail route visualization technique for visualization of a detail map. This system improved turn-by-turn method and line drive system, which are widely adopted by current route visualization system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.115-125
• /
• 1998

This paper examined the feasibility of adding a new NGSO/MSS(Non-Geostationary orbit/Mobile satellite service) service link to a frequency band which is already allocated to fixed-service microwave(M/W) system. To achieve this goal, the NGSO/MSS handset performance under the influence of the M/W multiple stations and the influence of handsets on the M/W station were both analyzed. Sharing criterions were also obtained by means of coordination contour in the former case, and handset capacity in the latter case. As the results, it was proven that sharing was feasible only when the vertical distance between handset and trendline was above 4 km except front and back points of M/W antenna bore sight under influence of 9 hops(the distance between hops = 50 km) M/W system on the NGSO/MSS handset, and only when the capacity of handset was below $7.0\times10^{-14}$ handsets/ $m^{2}$ under influence of handsets on the M/W station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.1-8
• /
• 2007

In this paper, we have derived the Noise-Equation to determine the level of cross-modulation noise that is required for designing multi-band CDMA handset from IS-98 standard. From this Noise-Equation, also we were able to determine each component's specification and forecast the performance(or margin) of designing handset. In conclusion, we have designed and implemented the multi-band CDMA handset of Qualcomm's Zero-IF structure and verified validity of the Noise-Equation. In result, we have got the result of ${\pm}0.5dB$ error between Noise-Equation and actual measurement. Therefore, this paper will give a guideline for design of the Multi-Band CDMA handset.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.835-840
• /
• 2014

New ways of achieving small, multiband, multifunctional, and standard solutions for mobile handset antennas are demanded in the current wireless market. A non-resonant element of $5mm{\times}5mm{\times}5mm$, a matching network, and a $100mm{\times}40mm$ slotted ground plane are proposed to satisfy mobile market demands that require multiband operation and small antenna solutions. The main advantage of the proposed design is that with only one non-resonant element of considerably small size ($0.015{\lambda}$, 900 MHz), the handset is capable of providing operation at mobile bands.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.159-166
• /
• 2012

In this paper, we designed and implemented the MIMO (Multiple-Input Multiple-Output) antenna for the mobile handset that could be used for multiple services. Simulation results were obtained using SEMCAD X by SPEAG based on the FDTD (Finite Difference Time Domain) Method which showed that S11 values were less than -6 dB (VSWR < 3) for LTE (Long Term Evolution) 700/2300/2500, K-PCS (Korea-Personal Communication Service : 1,750 ~ 1,870 MHz), US-PCS (US-Personal Communication Service : 1,850 ~ 1,990 MHz), Wibro (2,300 ~ 2,390 MHz), Bluetooth (2,400 ~ 2,483 MHz), and US-WiMAX (US-World interoperability for Microwave Access: 2,400 ~ 2,590 MHz) frequency bands. Measured results of the fabricated antenna also showed that it could be used for LTE 700/2300/2500, K-PCS, US-PCS, Wibro, Bluetooth, and US-WiMAX. services.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.968-971
• /
• 2001

In this paper, internal antennas for IMT-2000 handset(1.92∼2.17 GHz) were designed to be capable of being mounted on the circuit-board with a CPW(coplanar waveguide) feeding structure. The chip antennas were miniaturized to a greater extent by fabricating multilayer high dielectric ceramic($\varepsilon$$\sub$r/=7.8) hexahedron. The proposed antennas has λ/4 monopole element with helical structure in the multilayer dielectric ceramic hexahedron. The simulated and measured results were invesgated with width, length, and thickness of helical structure in the hexahedron.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.899-903
• /
• 2003

In this paper, a wide band helical antenna for mobile handset using parasitic element effect has been investigated. To obtain the effect of parasitic element, we utilized the cylindrical conductor which is not feed. As thickness of cylindrical conductor is increasing, second and third resonance frequency become abruptly variable. In case of that 4.5mm diameter parasitic element cylindrical conductor is inserted, normal mode helical antenna obtained bandwidth of around 900 MHz on the limit of R. L., - 5 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.219-225
• /
• 1998

A voltage controlled oscillator for the local oscillator in 380 MHz TRS handset is designed and fabricated. To improve the phase noise characteristics, the NEC's 2SC4226 transistor with NF=1.2 at 1 GHz and Toshiba's 1SV229 varactor diode with Q=70 are used. And an inductor of VCO is realized by microstrip line. At the bias condition of 5 V and 10 mA, the output power and phase noise in the operating frequency range of 357∼387 MHz are above 3.7 dBm and 111 dBc/Hz at 12.5KHz offset from the carrier, respectively. And FM sensitivity deviation are within ±0.4 KHz. This VCO is well suited for TRS handset.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.325-328
• /
• 2000

This paper has been studied a rower amplifier for IMT-2000 handset. Circuit design is performed and optimized by using HP ADS RF software. Designed amplifier consist of 2 stage, has 25㏈ gain, over 27㏈m output power and about 40% power efficiency. Power amplifier operation frequency range is 1955${\pm}$70MHz. Mask layout of the designed Amplifier consisting of 4 mask. The measured results of these values are satisfying the specification of IMT-2000 handset.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.226-229
• /
• 2001

Owing to handset subsidies, large growth in the Korean mobile telephony subscribers has occurred. While most of firms create artificial switching costs by rewarding customers for repeated purchases to retain their customers, mobile telephone carriers discriminate against loyal customers through handset subsidies. This article examines the effect of switching cost on the prices and profits in a two-period, differentiated product duopoly model.