• International Commerce and Information Review
• /
• v.7 no.2
• /
• pp.75-94
• /
• 2005

This study is focused on evaluating the computer-integrated just-in-time (CI-JIT) production system of a semi-conductor manufacturing firm in Korea. Approaching the mid-1980s, the emphasis was on low price, low-cost operations, and quality, especially in USA. American companies have shifted output to low-wage countries like the Philippines, Korea, Japan, Malaysia and allied countries that can make quality products at low prices. Korea and other Asian countries forego short-term profits to gain a solid foothold in a product market, recognizing that larger market share leads to lower cost and higher profit in the long run. They bring manufacturers and suppliers together to improve material management and operation management, using project teams that investigate topics, such as Just-In-Time(JIT)manufacturing, among others. The "Kanban" word means "card" in Japanese, and is used to indicate the desired final delivery schedule. The operation for a particular item produced is scheduled for a specific time. The same process is extended to the external suppliers. More recently, the cards are gradually being replaced by electronic procedures that follow the same concept. Its capacity must be capable of handling the various transactions required by the JIT coverage as well as some allowances for expanded applications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.1
• /
• pp.24-31
• /
• 2005

Recently, Platelet rich plasma(PRP) is commonly used because it is now well known that platelets have many functions beyond that of simple hemostasis in aspect of containing autogenous source of several growth factors. It could be responsible for increasing cell mitosis, increasing collagen production, recruiting other cells to the site of injury, initiating vascular ingrowth, and inducing cell differentiation, enhancing bone formation capacity and easily handling to clinician. However, in spite of these clinical advantages, still the theory behind the use of PRP is compelling. This study was to determine preparation techniques used to increase the concentration of platelets and growth factors are all crucial steps in early wound healing of bone graft which may lead to a more rapid and denser bone regenerate. 200 volunteers were sampled and PRP were prepared according to each evaluation item in this study. Higher concentration of platelets have been gained in double centrifugation. 2000 and 2500 rpm showed proper concentration of platelets at first centrifugation and 5000 rpm in second. Timing for 2 minutes was showed good concentration of platelets in high and low centrifugation speed. It was better concentration of platelets in 20 or 30 ml volume during centrifugation. In histomorphologic findings, degrnulated and high concentraion of platelets were found in low centrifugation speed.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.303-324
• /
• 2004

The Component-Based Software Development (CBSD) has established itself as a sound paradigm in the software engineering discipline and has gained wide spread acceptance in the industry. The CBSD relies on the availability of standard software components for encapsulation of specific functionality. This paper presents the framework for the development of a software component for the design of general member cross-sections. The proposed component can be used in component-based structural engineering software or as a stand-alone program developed around the component. This paper describes the use-case scenarios for the component, its design patterns, object models, class hierarchy, the integrated and unified handling of cross-section behavior and implementation issue. It is expected that a component developed using the proposed patterns and model can be used in analysis, design and detailing packages to handle reinforced concrete, partially prestressed concrete, steel-concrete composite and steel sections. The component can provide the entire response parameters of the cross section including determination of geometric properties, elastic stresses, flexural capacity, moment-curvature, and ductility ratios. The component can also be used as the main computational engine for stand-alone section design software. The component can be further extended to handle the retrofitting and strengthening of cross-sections, shear and torsional response, determination of fire-damage parameters, etc.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.61-72
• /
• 1999

This paper presents an estimation method of container handling capacity and selection of resource allocation strategies of container terminals using the computer simulation models. Simulation models are developed to model container terminal consisting of 4 berths considering the berth allocation strategies, crane allocation strategies and the total number of container cranes using Arena simulation package. The proposed models do not consider the yard operations and gate operations. All the input parameters for the models are estimated on the basis of the existing container terminal operation data and the planning data for the automated container terminal planned by Korean government. Four berth allocation strategies and three crane allocation strategies are considered. The total number of container cranes considered ranges from 12 to 15. Non-terminating simulation techniques are utilized for the performance comparison among alternatives. The performance measures such as average ship turnaround time, average ship waiting time, average ship service time, the number of containers handled per year, and the number of ships processed per year are used. The result shows that the berth allocation strategy minimizing the sum of the number of ships waiting, the number of busy container cranes and number of ships handled performs better than any other berth allocation strategies. In addition, the crane allocation strategy allocating up to 5 container cranes per berth performs better than any other crane allocation strategies. Finally there are no significant performance differences among the alternatives consisting of different total number of container cranes allocated.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.16 no.1
• /
• pp.9-18
• /
• 2010

For screening test of the non-volatile compounds which migrate from food packaging materials into foodstuffs, the traditional high performance liquid chromatography (HPLC) systems suffer from the lack of universal detector with high sensitivity and universality and high efficiency HPLC separation column which provides complete separation of complex mixtures into all individual substances. In this work, the use possibility of online two-dimensional liquid chromatography (2D-LC) system coupled with a charged aerosol detector (CAD), a universal detector, was reviewed. 2D-LC system permits to improve peak capacity and resolving power for complex mixtures. Charged aerosol detector (CAD) offers a new feasibility for detection of any non-volatile compounds with high sensitivity and constant response factor in a calibration range. The combination of size exclusion chromatography (SEC) and normal phase HPLC (NP-HPLC) is most frequently used for the separation of the natural and synthetic polymers which are mainly used as raw materials for the manufacture of food packaging materials. However, there is no commercial software available for data acquisition and handling and therefore the quantification in 2D-LC analysis is still rare.

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.81-86
• /
• 2014

The analysis of the cost optimization and the total demand weight of 9% Ni-steel plates for installing shell stiffeners in the side wall of the large capacity LNG storage tank are carried out in order to reduce the costs of the plates for stiffeners. This study can be possible for developing the calculation program which evaluates the bill-of-material for stiffeners to reduce the manual calculation time of tank designer, and to enable the estimation of weight and cost for various plate width. The results show that the demand weight and cost are reduced as the plate width is wider. Nevertheless, both the weight and the cost with plate width for stiffeners should be compared and evaluated to obtain the optimum cost time to time because of various cost incremental factors of plates such as transportation and handling cost, etc.

• Journal of the Korean Institute of Navigation
• /
• v.5 no.1
• /
• pp.1-23
• /
• 1981

As far as transportation problems are concerned, the minimization of transportation cost is the most prevailing object. But in some cases, the cargo delivery time is the utter problem rather than the cost. For instance, we may imagine the case that the delivery of the construction materials is delayed behind the schedule and this makes the construction cost increased because of idle time of other materials and man power, in addition to the indemnity. Therefore the allocation of ships, in marine transportation which is now the main route of overseas trade, to the needed area on the required time is to be appropriately performed. However, there are several restrictions for cargo delivery to meet the demand, such as ship's size, number to be employed and cargo handling capacity of the ports, etc. And there are some other factors to be considered, that is, the degree of necessities of commodities, on their kinds, amount, and the time of arrival, etc. This paper deals with the problem of optimum allocation of ships emphasizing the cargo delivery time adopting Linear Programming technique with those cargo delivery restrictions and factors transformed by introducing the multi-speed conception, the conversion of multi-commodity to a single commodity, allowable delivery time, weight penalty number and nominating priority. This paper presents a case of optimum allocation of ships in the light of cargo delivery time for a construction company which has two different construction places and analyzes the result. This study will give a planner a good tool for optimum planning of maring transportation and be used for decision of schemes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.14-23
• /
• 1996

Scheduling jobs effectively under consideration of actual loads on machines is one of the most complicated tasks in production control. The complexity of the finite capacity scheduling often makes the conventional methods of industrial engineering fail. As an alternative, Knowledge-based approaches to job-shop scheduling have been evolved recently. This paper presents a blackboard- based scheduling expert system which combines knowledge-based scheduling with interactive scheduling. It is shown to be possible to generate the feasible schedule within a reasonable time. Flexible reaction management is also possible while keeping the changes in the generated schedule to the minimal and adjusting the schedule to tardy operations or working environmental changes. The system is equipped with a rule base with heuristics for handling conflicted event. A case study applying the implemented system is described.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.701-710
• /
• 1996

Composting has gained rapid acceptance as a method of recyling relatively dry organic materials such as leaves and brush and , when alternative disposal costs are high, even moist materials such as grass clippings and dewatered sewage sludges. However, as moisture contents rise above 60% , the need for a dry bulking amendment increase the costs of composting , both by direct purchases of amendment and though increased reactor capacity and materials handling requirements. High moisture materials also present increased risks of anaerobic odor formation through reduced oxygen transport (Miller , 1991) . These costs and operational challengers often constrain the opportunities to compost high moisture materials such as agricultural manures. During the last several decades economies of scale in livestock production have been increasing livestock densities and creating manure management challenges throughout the world. This issue is particularly pressing in Korea, where livestock arms typically manage little or no cropland, and the nutrients and boichemical oxygen demand in manure pose a serious threat to water quality. Composting has recently become popular as a means of recycling manure into products for sale off the farm, but bulking amendments (usually sawdust) are expensive designed to minimize bulking agent requirements by using the energy liberated by decompostion. In this context the composting reactor is used as a biological dryer, allowing the repeated use of bulking amendment with several batches of manure.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.257-264
• /
• 2011

Recycling of industrial products as the stabilizers can be proper handling of industrial products and has positive side in terms of recycling of wastes. In this study, the final aims were to evaluate the usability as stabilizer of Bio-solids which was generated from contaminated soil with heavy metals after primary process and to compare the treatment efficiency with slag being currently applied in many existing sites. Soluble and exchangeable forms have closely related to pollution of groundwater and plant growth and they can be used to determine the effect of the stabilization efficiency. Slag and Bio-solids were tested to investigate the capacity of stabilizing arsenic. Slag treatment process 4 (PS-ball 5%) showed higher leachate concentration rather to 0.84% compared to treatment 1 (blank) based on an average of 0.63%. The other hand treatment 4 (Bio-solids 5%) showed the lowest soluble and exchangeable forms to 0.57% when Bio-solids was applied to stabilize arsenic. Thus, the leaching of arsenic will be more reduced if the Bio-solids are used as stabilizer in stead of slag which is being currently used in many fields.