• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.149-156
• /
• 2017

In this paper, we propose to enhance a Physical working conditions to decrease absence from work. we demonstrated the correlation of worker's absence with various environmental factors in workplace by surveying 6,962 workers. As result, first, concerning exposure to physical work factors, most of them complained of vibration, and concerning exposure to improper working posture, most of them complained of repetitive arm and hand motions. Second, the absence experience had correlations with age, monthly income, smoking, number of employees, long term working, and shift work, and of the physical factors, hand vibration, noise, high temperature, low temperature and improper working posture had correlations with physical pain posture, movement of people and carrying heavy materials. Third, experience of exposure to hand vibration, noise and low temperature of the physical factors had impact on absence, and of the improper working posture, physical pain posture and carrying heavy stuff had impacts on absence. Through this study, it was found that of the work factors of Korean workers, physical factors and improper working posture had impacts on absence. The results of this study confirmed that physical factors and inappropriate working posture among work factors influenced the absenteeism. Therefore, it is required to improve the work environment regarding physical risk factors and prepare a systematic management plan.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.270-277
• /
• 2023

Exposure to ionizing radiation induces free radicals in human nails. These free radicals generate a radiation-induced signal (RIS) in electron paramagnetic resonance (EPR) spectroscopy. Compared with the RIS of tooth enamel samples, that in human nails is more affected by moisture and heat, but has the advantages of being sensitive to radiation and easy to collect. The fingernail as a biological sample is applicable in retrospective dosimetry in cases of localized hand exposure accidents. In this study, the dosimetric characteristics of fingernails were analyzed in fingernail clippings collected from Korean donors. The dose response, fading of radiation-induced and mechanically induced signals, treatment method for evaluation of background signal, minimum detectable dose, and minimum detectable mass were investigated to propose a fingernail-EPR dosimetry protocol. In addition, to validate the practicality of the protocol, blind and field experiments were performed in the laboratory and a non-destructive testing facility. The relative biases in the dose assessment result of the blind and field experiments were 8.43% and 21.68% on average between the reference and reconstructed doses. The results of this study suggest that fingernail-EPR dosimetry can be a useful method for the application of retrospective dosimetry in cases of radiological accidents.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

• Safety and Health at Work
• /
• 제5권4호
• /
• pp.175-180
• /
• 2014

Wet-work can be defined as activities where workers have to immerse their hands in liquids for >2 hours per shift, or wear waterproof (occlusive) gloves for a corresponding amount of time, or wash their hands >20 times per shift. This review considers the recent literature on wet-work exposure, and examines wet-work as a main risk factor for developing irritant contact dermatitis of the hands. The aim of this paper is to provide a detailed description of wet-work exposure among specific occupational groups who extensively deal with water and other liquids in their occupations. Furthermore, it highlights the extent and importance of the subsequent adverse health effects caused by exposure to wet-work.

• 한국산업보건학회지
• /
• 제6권1호
• /
• pp.1-16
• /
• 1996

This study was conducted at an automobile assembly line located in Kyonggi-do, Korea from January 16 to February 28, 1995. The purposes of this study were to assess worker exposures to hand-arm vibration and the performance of gloves for reduction of vibration. The exposure to vibration was measured using to the ISO 5349(1986) method. Vibration acceleration and frequency spectra for each tool were determined on-line replicating actual working conditions and analyzed together with exposure time for evaluating individual worker exposure. Eight pneumatic hand tools, 60 workers exposured to hand-arm vibration, and three pairs of gloves were involved in this study. Results are summarized as follows. 1. Dominant frequencies of vibration for all tools(n=8) measured in this study ranged from 250 Hz to 800 Hz. 2. There was no significant correleration between dominant frequencies and free running speed (p>0.05). 3. Total predicted exposure times of using impact, hammer type did not exceed 40 minutes, but metal finish task, using grinder and sander exceeded 40 minutes. Total exposure time affected significantly the frequency-weighted, 4 hr equivalent acceleration. 4. Predicted prevalence and observed exposure period data were compared in workers(n=60), according to ISO 5349. In this results, 23(50.0 %) and 24(48.07 %) persons exceeded the mean latency periods for vibration-induced white finger(VWF) at 10 % (n=46) and 50 % (n=52) standards, respectively. On the basis of ISO equation, mean latent periods for VWF were 3.23, 4.72 years at 10 %, 50 % standards, respectively. 5. Reduction of vibration by gloves was evaluated. Since impact pneumatic tools produced low frequency vibrations, conventional gloves did not provide any protection. Gloves A and C amplify somewhat the signal at frequency below 400 Hz; the attenuation increases progressively by frequency to reach 18 dB ($7.94{\times}10^{-6}m/s^2$) at 1,000 Hz, slightly worsening Glove B did not provide any protection and made the situation slightly worse. However, since they make the hands warm, the occurrence of vibration-induced white fingers may be reduced.

• Toxicological Research
• /
• 제21권4호
• /
• pp.297-301
• /
• 2005

Farmers are generally expressed to pesticides through mixing loding, application activity and harvesting of crop after application of pesticides. The present work investigated the exposure and risk of furathiocarb to workers when harvesting of cucumber was carried out in green house after application of furathiocarb EC. Glove was used for the hand exposure assessment, socks for foot and dermal patches for the other parts of body. Personal air monitor equipped with a XAD-2 resin was used for the respiratory exposure assessment. During the harvest of cucumber in green house, the initial rate of potential dermal exposure (Day 1) for methidathion was 1.3 mg/hr. The major exposure parts were hand $(78\~83\%),\;thigh\;(5\~7\%)$ and arms $(6\~9\%)$ during 3 days' harvest. No exposure was detected from the respiratory monitoring. For risk assessment, the potential dermal exposure (PDE), the absorbable quantity of exposure (AQE) and the margin of safety (MOS) and margin of exposure (MOE) were calculated. In risk assessment of harvester exposure for 7days, all MOS was > 1 and MOE was > 100 indicating that possibility of risk was little.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1032-1037
• /
• 2003

This work measured the hand-transmitted vibration due to shipyard worker's grinding and assessed the vibration exposure for predicted 10% prevalence of vibration-induced white finger in a group of exposed persons according to test procedure of ISO 5349-1. And also the transmissibility performance of resilient material, mainly applied to anti-vibration gloves in present market was measured on the basis of ISO 13753 and confirmed that the material would Probably not provide greater attenuation below 30㎐, the dominant frequency range of hand-transmitted vibration due to grinder.

• 한국산업보건학회지
• /
• 제16권4호
• /
• pp.398-412
• /
• 2006

The purpose of this study is to investigate the relationship between the acceleration of vibration by the powered hand tools used in the shipbuilding industry, and to develop the prospective prevalence model for the hand-arm vibration syndrome among the shipbuilding workers.The acceleration levels and frequencies of six types of grinder were measured using the ISO5349 method along with the time of exposure to the vibration from the powered hand tools. Medical examination for 114 workers were performed using the cold provocation test. Comparisons were made between the estimated prevalence of hand-arm vibration syndrome from ISO5349 and the observed values from the medical examinations. By multiple regression, we developed the prospective prevalence model of hand-arm vibration syndrome produced by the hand tools used in the shipbuilding industry. 4 hour-energy-equivalent frequency-weighted accelerations were $6.23m/s^2$ in the grinding job done after welding, and $13.39m/s^2$ in the grinding job done before painting. The mean exposure time while holding powered hand tools was 4.64 hours. Prevalence rates of Raynaud's Phenomenon were 12.04% in the grinding after soldering, and 42.9% in the grinding before painting measured using the ISO5349 method. After exposure to vibration for 10.79 years, about a half of the workers in the grinding after welding could developed Raynaud's Phenomenon. For the workers in the grinding before painting, the latency was 5.02 years. The ISO equation for dose response relationship was not significantly correlated with observed recovery rates of finger skin temperatures, blood flows and amplitudes of nerve conduction velocities. A multiple regression model for dose-response relationship was proposed from the results. Recovery rate of the skin temperatures = -0.668+ 0.337 ${\times}$ 4 hour energy equivalent frequency-weighted accelerations + 0.767 ${\times}$ duration of vibration exposure(years) The validity was proved by multiple regression analysis after correlation transformation and regression results based on model-building data and validation data.

• 농촌의학ㆍ지역보건
• /
• 제29권2호
• /
• pp.249-263
• /
• 2004

본 연구에서 시험한 두 가지 농약에 대한 피부노출 측정 및 분석방법을 시험하였고 두 가지 농약에 대한 측정 및 분석방법으로써 모두 적정함을 확인하였다. 두 가지 농약에 대하여 호흡노출의 측정 및 분석법에 관한 타당도를 시험한 결과 본 연구방법으로 chlorpyrifos는 만족하였고 chlorothalonil의 경우 피부노출 측정 및 분석법만 타당하였다. 이와 같이 확정한 노출 측정방법으로 배 방제작업과 노지고추 방제작업시 농약노출량을 측정하였고 여러 가지 요인별로 비교하였나 두 가지 농약에 대하여 각 작목, 살포시기, 노출평가(피부,호흡기)와 작업용 변수로하여 노출평가를 실시하였다. 피부노출량은 과수 동력분무기, 노지고추 동력분무기 > 과수 SS기 > 동력분무기 보조의 순서로 나타났다. 과수 동력분무기와 노지고추 동력분무기 살포간 노출량의 차이는 유의하지 않았다. 과수나 노지고추의 방제만을 볼 때 다른 요인보다는 살포기기가 피부노출에 영향을 주는 주된 요인인 것으로 파악된다. 피부노출에서 작목은 주로 노출부위에 영향을 주는 것으로 평가되었다. 보조작업의 경우 손노출이 66%로 가장 높게 나타났다. 호흡기노출량은 각각의 노출이 서로 다르다고 할 수 없었다. 위험도 평가결과 chlorpyrifos 살포작업은 위험한 것으로 나타났으며 노출농도를 약 1/5 이하로 감소시킬 필요가 있는 것으로 밝혀졌다.

• 한국의류학회지
• /
• 제22권7호
• /
• pp.963-968
• /
• 1998

A study was conducted to investigate the effect of cooling hands of feet on human thermoregulation in the cold. Eight young (22$\pm$1 yr) and eight aged (69$\pm$4 yr) men volun-teered as subjects They stayed at 1$0^{\circ}C$ in the supine posture during the experiment which included hands or feet exposure to the air for 20 minutes. Hand Exposure (HE) and Foot Exposure (FE) were conducted in radomized order and the baseline was kept before HE and FE. Core temperatures, limb skin temperatures adn thermal sensations were measured. Obtained data were analyze using t-test and correlation. Rectal and esophageal tem-peratures increased in the young (YG) and in aged (AG). Change rate of esophageal temperature (Tes) was maintained higher during FE than HE while rectal temperature showed no differences between YG and AG, and between HE and FE. Hand and foot skintemperature in YG and AG decreased similarly during HE and Fe. Forearm skin temperature during HE decreased while leg skin temperature during FE showed no change HE and Fe. It was concluded that the lower cooling. Furthermore, the increase of Tes was greater in young men than aged men. It is also suggested that the wearing behavior can be differently modified between young and aged men.