• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1043-1047
• /
• 2003

Most of the measurement and the evaluation of hand-transmitted vibration have been performed by using a small size single axis accelerometer between the handle and the hand palm or a three axis accelerometer attached on an adapter outside the hand(indirect measurement). It is most desirable for the correct evaluation of hand-transmitted vibration form the power tool handle to measure the acceleration between the handle surface and the hand palm in the three axis(direct measurement) as recommended in ISO 5349-1. In the study three axes acceleration measurement device was developed of which the thickness was less than 7mm so that it can be placed between the handle and the palm without any inconvenience during the measurement. To verify the performance of the developed device, measured acceleration by the two methods, direct and indirect, were compared in the study.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.537-543
• /
• 2008

The purpose of this study was to evaluate the comfort and fabric hand characteristics of selected lining fabrics made of acetate and polyester. The comfort of the linings was determined by human subjects wearing suit blazers constructed with different lining materials in an environmental chamber controlled at $30.6^{\circ}C$ air temperature and 50% relative humidity. The hand characteristics of the lining fabrics were determined by five trained panelists using standard fabric reference samples. The effect of lining fabrics on the subjects' thermal sensations was not statistically significant. But the subjects voted warmer when wearing the polyester surah lined blazer or the polyester taffeta blazer than wearing the acetate blazers. The results of the subjective comfort evaluation indicated that, in general, the subjects rated the acetate linings significantly less sticky, clammy, damp, and non-absorbent than the polyester linings. Acetate surah was rated a little higher than the other acetate fabrics on these comfort descriptors. The results of the subjective hand evaluation indicated that the lining fabrics rated low on the geometric and mechanical hand characteristics and rated moderate on noise. Acetate surah scored the highest on most of the hand characteristics, whereas, polyester taffeta scored the lowest.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.4
• /
• pp.11-21
• /
• 2015

Purpose : The purpose of this study was to provide the material about the treatment effect of hand function training and writing training being performed as a part of treatment to improve the function of the non-dominant hand of the patients whose dominant hand is damaged and thus need to improve their non-dominant hand's function. Method : During one month of November, 2013, this study randomly chose five study subjects for hand function training, five for writing training, and ten of control group from 20 normal male and female adults going to K Univ. in Busan. All study subjects fully understood all of the training course, agreed to take the test in this study, and volunteered to participate in the test. Each training was performed five times for two weeks, 30 minutes each time. For measurement, Purdue pegboard was used to look into the change of hand dexterity. To investigate an improvement in hand function through hand function training and writing training, this study conducted early evaluation before training, interim evaluation, and final evaluation. Result : First, according to the comparison of dominant hand dexterity by group and by method during a training period, the groups of hand function training and of writing training improved dominant hand dexterity more than the control group. Secondly, according to the comparison of non-dominant hand dexterity by group during a training period, the groups of hand function training and of writing training improved dexterity more than the control group. According to the comparison of non-dominant hand dexterity by method during a training period, there was no big difference in dexterity between the groups of hand function training and of writing training and the control group. But, the group of hand function training showed a further improvement. Thirdly, according to the comparison of both-hand dexterity by group and by method during a training period, the groups of hand function training and of writing training improved both-hand dexterity more than the control group. Fourthly, according to the comparison of both-hand handling ability by group and by method during a training period, the groups of hand function training and of writing training improved both-hand handling ability more than the control group. Conclusion : Given the study result, it is considered that hand function training and writing training help brain damaged patients improve their hand function for their daily activity. And it will be meaningful to research brain damaged patients' motor skills after their brain damage, and the patients who have low abilities of visual perception and cognition. In the future, it will be necessary to secure more study subjects and perform systematic training during a sufficient test period.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1194-1205
• /
• 1999

The hand characteristics of bast blended fabrics are studied by a subective evaluation method. To offer basic data for development of better hand of bast fiber fabrics customer's hand preference surveys are executed as well. IN this study 51 varieties of linen or ramie blended fabrics of various blending ratio density and thickness and Hansan ramie Chinese ramie and a Shingosen fabics of various blending ratio density and thickness and Hansan ramie Chinese ramie and a Shingosen farbic and used. To evaluate the hand of the fabrics subjectively nine ranks' semantic differential scale questions of 26 items are developed with adjective pairs. A seven ranks' scale is also developed to evaluate hand preferences in blouse and jacket cloths, Through subjective evaluation of bast blended fabrics the 26 items could be classified into seven kinds of hand classification : surface characteristics extensibility/drapability felling of heaviness stiffness resilience moisture property and feeling of density. The cumulative variance value explained by these seven factors is 67.18% According to the results of fabrics' preference by age groups no significant differences are found in blouse cloths but a few significant differences are found among different age groups in jacket clothes. However experts and non-experts show considerable differences on preference It can be concluded that fabrics' preference I more dependent on professionality than on age. In the survey experts. However more drapery cloths are preferred by experts and cloths with drier touch are preferred by non-experts. Experts prefer rougher less even less winding heavier and sparser fabrics but non-experts prefer rougher lighter thinner and stiffer fabrics as jacket cloths.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.6
• /
• pp.784-789
• /
• 2004

The purpose of this research was to analyze how the evaluation method affects the subjective hand evaluation of fabrics and to suggest the efficient evaluation method. Three methods such as the sense of sight ＆ touch, the sense of touch, and the sense of sight were respectively used when judges estimated the hand of fabrics using questionnaire. The result obtained by the method of touch was same as that by the method of sight ＆ touch. The time required for the evaluation by these two methods was statistically same. Consequently, the method of touch has no attraction compared to that of touch ＆ sight. In case of using the method of sight, 8 properties among 10 showed the same results as in the method of sight ＆ touch. The properties of [moogupda/kabyupda] and [shinchuksung-e-itda/ shinchuksung-e-upda] evaluated with the sense of sight were different from the results obtained by the other methods. These properties seem to be difficult to evaluate only by seeing the fabric on the table. For the precise evaluation, it is necessary to show dynamic movement of the fabric. The time required for the evaluation by the sense of sight was shorter than that by the other two methods.

• Journal of the Korean Home Economics Association
• /
• v.40 no.9
• /
• pp.97-107
• /
• 2002

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.596-605
• /
• 1994

An efficient measurement and evaluation system for hand tool tasks will provide a practical solution to the problem of designing and evaluating manual tool tasks in the workplace. Few studies on the biomechanical analysis of hand postures and tool handling tasks exist because of the lack of appropriate measurement techniques for hand force. A measurement system for the finger forces and joint angles for analysis of manual tool handling tasks was developed in this study. The measurement system consists of a force sensing glove made from twelve Force Sensitive Resistors and an angle-measuring glove (Cyberglove$\^$TM/, Virtual technologies) with eighteen joint angle sensors. A biomechanical model of the hand using the data from the measurement system was also developed. Systems of computerized procedures were implemented integrating the hand posture measurement system, biomechanical analysis system, and the task analysis system for manual tool handling tasks. The measurement system was useful in providing the hand force data needed for an existing task analysis system used in CTD risk evaluation. It is expected that the hand posture measurement developed in this study will provide an, efficient and cost-effective solution to task analysis of manual tool handling tasks. These tasks are becoming increasingly important areas of occupational health and safety of the country.

• International Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.27-37
• /
• 2007

The purpose of this study is to investigate the preference of the hand and the sensibility image of underwear textiles according to seasons. According to a recent survey of 109 college students, using a 7 scale evaluation to the preference of the hand and the sensibility image among 13 summer and 10 winter underwear textiles. The data was analyzed through mean, SD, factor analysis, t-test, Person correlation analysis and regression analysis using SPSS Win 11.0. The summer underwear textiles were classified according to six tactile factors: stiffness/surface unevenness, weight, elasticity, moistness, extension, and warm-cool and 3 sensibility image factors: elegant individual, modern, and sporty-casual. The winter textiles were classified according to six tactile factors: stiffness/surface unevenness, elasticity, warm-cool, drapability, moistness and flexibility and divided into 2 sensibility images: modern elegant and sporty-casual. Factors expressing hand and sensibility image according to season showed significant difference. In the summer, weight, in the winter, drapability and flexibility showed significant difference at the hand factor evaluation. The hand factors: weight, warm-cool and modern sensibility image factors effect the preference of summer underwear textile, also the hand factors-elasticity, stiffness/surface unevenness and the sensibility image factor-easy-sport-casual-effect the preference of winter textiles. Therefore, the thin, light, and cool textiles which are also gorgeous and sporty-casual are preferred for summer underwear textiles while soft, simple and comfortable textiles are preferred for winter textiles.

• Korean Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.275-281
• /
• 2006

The purpose of this study is to investigate hand and sensibility of PET treated by Ultra-Violet (UV). The 4-channel PET knit fabric was treated by a self-made UV instrument in 5cm distance with different time frames-0min, 30min, and 90min. For hand evaluation, mechanical properties were measured by the KES-FB system. The environmental condition was controlled at 29$^{\circ}C$, 75% (R.H.)-summer standard climate. Twenty female students evaluated 'roughness', 'smoothness', 'wetness', 'stiffness', 'coolness', 'touch', 'preference', and 'comfort'. The outcomes of the experiment are as follows: The surface roughness of mechanical properties showed significant differences and the value of PET irradiated by UV for 90min was highest. The order of primary hand value such as NUMERI and FUKURAMI was in a following order-Untreated > 30min treated > 90min treated. Total hand value showed that PET irradiated by UV for 90min was appropriate for using summer fabric. The results of subjective sensibility were that the untreated and 30min treated PET were recognized as similar and had a good evaluation on 'comfort', 'preference' and 'the sense of touch'. This consequence disagreed with total hand value, because it was considered that subjects' hand sensibility was dependent on the feel of smoothness.

• Fashion & Textile Research Journal
• /
• v.19 no.1
• /
• pp.79-89
• /
• 2017

Sensory attributes and preferences that contribute to consumer satisfaction with artificial leather were measured by subjective evaluation, and subjective hand and preferences were analyzed in relation to its use. Using tactile and visual senses, 50 experts in fashion and textile industry evaluated leathers classified into two categories, suede and polyurethane coated, according to different manufacturing methods. They answered questions on subjective hand and preferences of different artificial leathers of various fashion items (jackets, purses, bags, shoes, boots, furniture, etc.), using specific adjectives to describe the hand properties. As a result, it was found that the subjective hand properties of artificial leathers were related to 'Thickness', 'Fullness/softness', 'Surface contour', 'Stickiness', and 'Elasticity'. The leather type from different manufacturing methods influenced their perceived hand and preferences relating to use. By use, different hands were preferred. The preferences for jackets and furniture of suede type leathers were related to their surface properties, whereas the preferences for items of the other type of leathers were associated with their resilience. On the other hand, in the case of polyurethane coated leathers, the preferences for jackets were significantly affected by their thickness, while those for the other items were influenced by their resilience and surface properties.