• ETRI Journal
• /
• v.42 no.4
• /
• pp.527-533
• /
• 2020

High-level synthesis (HLS), which automatically synthesizes a register-transfer level (RTL) circuit from a behavioral description written in a high-level programming language such as C/C++, is becoming a more popular technique for improving design productivity. In general, HLS tools often generate a circuit with a larger area than those of hand-designed ones. One reason for this issue is that HLS tools often generate multiple instances of the same module from a function. To eliminate such a redundancy in circuit area in HLS, HLS tools are capable of sharing modules. Function-level module sharing at a behavioral description written in a high-level programming language may promote function reuse to increase effectiveness and reduce circuit area. In this paper, we present two HLS techniques for module sharing at the function level.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1800-1803
• /
• 1997

This paper presents new feedback actuators to achieve an accurate position control of a flexible gnatry robot arm. the translational motion in the plane is generated by two d.c.motors and controlled by emplying elecor-rheological(ER) clutch acutators. The generated motion can be continuously controlled by controlling the intensity of lectric field imposed to the ER fluid domain which tunes the transmitted torque of the ER clutch. n the other hand, during control action of the translational motion a flexible arm attached to the moving mass produces undesirable oscillatins due to its inherent flexibility. The oscillations are actively suppressed by applying feedback voltages to piezoceramic acutators bonded on the surface of the flexible arm. The control electric fields to be applied to the ER clutch and the control voltage for the piezoceramic actuator are determined via the loop shaping esign procedures(LSDP) in the H.inf. control technique. Comsequently, an accuate positiion control at the end-point of the flexible am is achieved during planar motion.

• Corrosion Science and Technology
• /
• v.3 no.1
• /
• pp.26-29
• /
• 2004

Metal plated plastics are becoming more prevalent in materials of communication parts. A new technique MmSH is a process of injecting plastics to produce innovated physical properties compared to the conventional injection process. This study involves two ways of coating plastics Ni by electroless plating and varying bath and plasma treatment for improved adhesion strength between plating layer and surface. MmSH injection processed ASS with plasma treated after neutralization showed a superior adhesion force and a gloss and rate of deposition when it was in pH 7.5. On the other hand, conventional injection processed ASS was in pH 6.5.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.5
• /
• pp.266-276
• /
• 2013

LSB-based steganography is a simple and well known information hiding technique. In most LSB based techniques, a secret message is embedded into a specific position of LSB in the cover pixels. On the other hand, the main threat of LSB-based steganography is steganalysis. This paper proposes an asynchronous-cellular-automata(ACA)-based steganographic method, where secret bits are embedded into the selected position inside the cover pixel by ACA rule 51 and a secret key. As a result, it is very difficult for malicious users to retrieve a secret message from a cover image without knowing the secret key, even if the extraction algorithm is known. In addition, another layer of security is provided by almost random (rule-based) selection of a cover pixel for embedding using ACA and a different secret key. Finally, the experimental results show that the proposed method can be secured against the well-known steganalysis RS-attack.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.55-60
• /
• 2002

The recent trend in electronic devices has been towards light weight, low cost, high performance and improved reliability. Passive components are very important parts of microelectronic devices. The number of passive components used in hand held devices and computers continue to increase. To achieve improvements in costs, component density, performance, and reliability, embedding of these passive components into the printed circuit boards (PCBs) is required. This paper introduces the embedding of passive components, and discusses the remained challenges in the commercialization of this technique.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.153-155
• /
• 2002

The thermal conductivity of Ag and Ag alloys at low temperature (10~110 K) were evaluated by direct measurement technique. It was observed that thermal conductivity decreased with increasing the content of alloying elements such as Mg and Cu. Thermal conductivity of pure Ag tape at 20 K was measured to be 2794 W/m$\cdot$K. On the other hand, the corresponding values of Ag/Al tape and Ag/Al/sus315L tape were 1235 and 352 W/m$\cdot$K, respectively, indicating 2 to 8 times lower than that of pure Ag tape.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.27.1-27.1
• /
• 2009

In recent years, ZnO nanostructures have drawn considerable attentions for the development of futuristic electronic devices due to their superior structural and optical properties. As the growth of ZnO nanowires by MOCVD is a bottom-up technique, the nature of substrates has a vital role for the dimension and alignment of the nanowires. However, in the pursuit of next generation ZnO based nanodevices, it would be highly preferred if well-ordered ZnO nanowires could be obtained on various substrates like sapphire, silicon, glass etc. Vertically aligned nanowires were grown on A and C-plane sapphire substrates, where as nanopencils were obtained on R-plane sapphire substrates. In addition, C-axis oriented vertical nanowires were also found using an interfacial layer(aluminum nitride film) on silicon substrates. On the other hand, long nanowires were found on Ga-doped ZnO film on glass substrates. Structural and optical properties of the ZnO nanowires on various substrates were also investigated.

• Applied Biological Chemistry
• /
• v.41 no.8
• /
• pp.583-586
• /
• 1998

Porous ceramic cups are used for monitoring ion concentration in soil solutions in various time course and depth. A soil solution sampler was constructed in laboratory by inserting pliable perfluoroalkoxy(PFA) tubings into porous cup through holes in PVC rod segment which plugged top opening of the porous cup. The system was installed in drip irrigated soil in a vertical position, and nitrogen movement below the drip basin was monitored. To collect soil solution, vacuum in the cup was applied with a hand vacuum pump. The samples obtained were sufficient enough to run quantitative analyses for a number of chemicals. Nitrogen transformation and movement could be well defined, and the system seemed to be relevant to the other soil solution samplers in monitoring chemical movement in soil. Although this system has general deficiencies found in the other samplers using ceramic cup, it could be easily constructed at a low cost. Since the tubing was pliable, the cups could be installed in horizontal position, and this allows installations of the cups at more precise depth increments and also more precise samplings of soil solution at each depth.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.257-260
• /
• 2005

Graphite reinforced conductive polymer composites were fabricated by the compression molding technique. Graphite powder was mixed with an phenol resin to impart electrical property in composites. The ratio and particle size of graphite powder were varied to investigate electrical conductivity of cured composites. In this study, graphite reinforced conductive polymer composites with high filler loadings(>66wt.%) were manufactured to accomplish high electrical conductivity. With increasing the loading ratio of graphite powder, the electrical conductivity and flexural strength increased. However. above 80wt.% filler loadings, flexural strength decreased due to lack of resin. Regardless of graphite particle size, electrical conductivity wasn’t varied. On the other hand, with decreasing particle size, flexural strength increased due to high specific surface area.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1092-1097
• /
• 2004

The heat (mass) transfer characteristics on the endwall surface of a first-stage linear turbine rotor cascade at off-design conditions has been investigated by employing the naphthalene sublimation technique. The experiments are carried out at the Reynolds number of $2.78{\times}10^{5}$ for two incidence angles of -5% and +5%. The positive incidence angle results in intensification of the pressure-side leg of a leading-edge horseshoe vortex, which delivers higher heat transfer along its trace. On the other hand, the negative incidence angle show an opposite tendency.