• The Journal of Korean Physical Therapy
• /
• v.10 no.2
• /
• pp.77-86
• /
• 1998

The shoulder joint permit ate greatest mobility of any joint area carries out the importment function of stabilization for hand use. So handgrip activity is important to evaluate while assessing shoulder load in manual work. There was an association between static handgrip and shoulder muscle activity. The purpose of this study was to find out the changes of the hand grip strength according to shouter an81e. One hundred (50 female, 50 male) college adult volunteers with no known shoulder dysfunction participated subject in three positions with elbow extension: (1) shoulder $0^{\circ}$ flexion (2) shoulder $90^{\circ}C$ flexion (3)shoulder $180^{\circ}C$ flexion. The paired t-test was used to determine the different in grip strength between right and left hand at shouter position change. All, there was significiant for all three position by right and left shoulder (p<0.001). In mon, the ANOVA results revealed not a significiant F-ratio fer all three position by right and left hand. In woman, revealed significiant (p<0.05).

• The Journal of Korean Physical Therapy
• /
• v.19 no.2
• /
• pp.33-39
• /
• 2007

Purpose: The purpose of this study was to investigate the effect of wrist position on grip strength. A Grip-Strength is measurement of muscle strength in hand. It is evaluated for the motor function and handicap of hand, projection of treatment plan. It is important because correct treatment. Methods: Total 80 college students were participated in this study, who consisted of 40 males and 40 females(age range: $20{\sim}26$). A Grip-Strength Dynamometer was used to measure the grip strength in three wrist position(flexion, extension, neutral position) and two elbow position(supination, pronation). The ANOVA was conducted to determine any significant difference in grip strength between the wrist position and the two elbow position. Results: The results were as follows: 1. The grip strength was affected by wrist position changes. 2. The difference of grip strength according to elbow position Was not significant difference (p>0.01). 3. The grip strength i1l neutral position was strongest among 3 position of wrist (p<0.01). Conclusion: A Grip-Strength was significant difference in wrist position. Pronation position was minimum grip-strength but not significant difference between supination and pronation.

• Therapeutic Science for Rehabilitation
• /
• v.7 no.2
• /
• pp.29-40
• /
• 2018

Objective : The purpose of this study was establishing clinical norms of TEMPA Korean version for Korean adult population in addition to identifying characteristics of hand function by age and gender based on the collected data. Methods : A total of 138 healthy adults between ages 20 and 59 were recruited by continuous sampling. All subjects had been employed TEMPA Korean version and Jarmar dynamometer and pinch gauge to evaluate hand function and strength. Results : The results showed that there were no statistically significant difference in overall hand function among the age groups and between genders. Also, while there were no significant differences in overall speed and qualitative movement, age groups of 40s and 50s showed a declining tendency in speed in some of the tasks. Also, hand strength increases up to 40s and start declining from the 50s, but most results did not show significant differences among the age groups. Conclusion : Normative data of TEMPA Korean version for Korean adult population was established, therefore, it can be used in clinical setting and research as evidence based. Furthermore, occupational therapists need to consider about the signs of decline in hand function and strength in middle-aged adults and to provide education programs to maintain their hand function.

• Therapeutic Science for Rehabilitation
• /
• v.8 no.2
• /
• pp.43-53
• /
• 2019

Objective : This study aimed to identify the characteristics of hand function according to age and sex in older adults. Methods : This study included 103 healthy adults aged ${\geq}60$ years. The Korean version of TEMPA was used to assess hand function and a Jamar dynamometer and pinch gauge were used to assess hand and pinch strength in all participants. Results : The results of hand function assessment showed that speed of task execution (mean = 121.32 s, SD = 18.07 s in subjects aged 60-69; mean = 144.97 s, SD = 28.43 s in subjects aged 70-79; and mean = 160.93 s, SD = 38.33 s in subjects aged ${\geq}80$, p < .001) and fine movement (mean score = -.14, SD = .40 in subjects aged 60-69; mean score = -.63, SD = 1.07 in subjects aged 70-79; and mean score = -.57, SD = .65 in subjects aged ${\geq}80$, p = .01) decreased significantly with age. The male group showed better speed of task execution (mean = 133.54, SD = 22.83 in males vs. mean = 150.55, SD = 39.89 in females, p < .01) and fine movement (mean score = -.16, SD = .37 in males vs. mean score = -.46, SD = .58 in females, p < .01) than the female group. Hand strength also decreased significantly with age (p < .05, to p < .001). Conclusion : Occupational therapists should be aware of the decline in hand function (especially speed of task execution and fine movement) and strength in older adults, as well as the need to provide interventions to treat this decline.

• Physical Therapy Korea
• /
• v.28 no.3
• /
• pp.208-214
• /
• 2021

Background: The CKCUES test evaluates the functional performance of the shoulder joint. The CKCUES test scores CKC exercises of the upper limbs to examine shoulder stability. Although the CKCUES test provides quantitative data on functional ability and performance, no study has determined the relationship between CKCUES scores and SA and TB muscle strength. Objects: The objective of this study is to determine the relationship between the CKCUES test scores and the strength of the SA and TB muscles in the CKCUES and unilateral CKCUES tests. Methods: Sixty-six healthy male volunteers participated in the study. A Smart KEMA strength sensor measured SA and TB muscle strength. Two parallel lines on the floor indicated the initial hand placement to start CKCUES tests. For 15 seconds, the subject raises one hand and reaches over to touch the supporting hand, then returns to the starting position. Results: The correlation between the CKCUES test scores and the strength of the SA was strong (r = 0.650, p < 0.001), and the TB was moderate (r = 0.438, p < 0.001). The correlation between the unilateral CKCUES test and the strength of the SA of the supporting side was strong (r = 0.605, p < 0.001), and swing side was strong (r = 0.681, p < 0.001). The correlation between the unilateral CKCUES test and the strength of the TB of the supporting side was moderate (r = 0.409, p < 0.001), and swing side was moderate (r = 0.482, p < 0.001). Conclusion: Our study showed that the CKCUES test had a strong association with isometric strength of SA and moderate association with that of TB. These findings suggest that the CKCUES test can evaluate the function of the SA. Moreover, the unilateral CKCUES test can evaluate unilateral shoulder function.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.45-54
• /
• 2013

In this study, various types of composite materials and adhesives that are actually used in the shipbuilding field for small ships, leisure boats, and fishing boats were applied in the hand lay-up method and vacuum infusion method to manufacture specimens. Then the tensile strength, tensile modulus, flexural strength, and flexural modulus values of these specimens were obtained. In addition, the barcol hardness and fiber content were obtained from the specimens. The results showed that the strengths of the specimens manufactured using the vacuum infusion method were higher than those manufactured using the hand lay-up method. Moreover, the barcol hardness and fiber content were also higher in those manufactured using the vacuum infusion method. The specimens manufactured using the vacuum infusion method were thinner despite their large fiber content.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.4
• /
• pp.163-169
• /
• 2016

Objective: The purpose of this study was to investigate the effects of vibration resistance exercise (VRE) in patients with tennis elbow on strength, range of motion (ROM), function, pain and quality of life (QOL). Design: Randomized controlled trial. Methods: Twenty-seven participants were randomly assigned to either the VRE group (n=9), weight resistance exercise (WRE) group (n=9) or control group (n=9). Each group underwent hot compress for 15 minutes and electrotherapy for 15 minutes. The VRE group underwent exercises using a vibrating ball for 5 minutes. The WRE group underwent exercises using dumbbells for 5 minutes. All participants were evaluated on wrist extension strength using a hand-held dynamometer, grip strength level through an electric dynamometer, and ROM through a smartphone goniometer application before and after intervention. Patient-rated tennis elbow evaluation, Visual Analogue Scale and Short Form 8 were measured by questionnaires. Results: There were showed significant differences among the VRE, WRE and control group in wrist extensor muscle and hand grip strength, ROM, elbow function, pain and QOL after intervention (p<0.05). The VRE group showed a greater significant improvement in wrist extensor muscle strength and elbow function compared with the others (p<0.05). The VRE and the WRE groups had a more significant improvement in wrist extensor muscle and hand grip strength, ROM and pain compared with the control group (p<0.05). However, there were no significant differences in QOL among the three groups. Conclusions: Combining VRE with thermotherapy and electrotherapy appears to be more effective in improving wrist extension strength, ROM, elbow function, QOL in tennis elbow patients.

• Physical Therapy Korea
• /
• v.18 no.4
• /
• pp.34-42
• /
• 2011

The lumbrical muscles contribute to the intrinsic plus position, that is simultaneous metacarpophalangeal (MCP) flexion and interphalangeal (IP) extension. The strength of the lumbrical muscles is necessary for normal hand function. However, there is no objective and efficient method of strength measurement for the lumbrical muscles. In addition, previous studies have not investigated the measurement of the cross-sectional area (CSA) of the lumbrical muscles using ultrasonography (US) and the relationship between lumbrical muscle strength in the intrinsic plus position and the CSA. Therefore, the purpose of this study was to identify the measurement method of the CSA of the lumbrical muscles using US and to examine the relationship between maximal isometric strength and the CSA of lumbrical muscles. Nine healthy males participated in this study. Maximal isometric strength of the second, third, and fourth lumbrical muscles was assessed using a tensiometer in the intrinsic plus position which isolated MCP flexion and IP extension. The CSA of the lumbrical muscles was measured with an US. The US probe was applied on the palmar aspect of the metacarpal head with a transverse view of the hand in resting position. There was no significant difference between maximal isometric strength of the lumbrical muscles, but the fourth lumbrical muscle was stronger than the others. The CSA of the lumbrical muscles was significantly different and the fourth lumbrical muscle was significantly larger than the second lumbrical muscle. There was moderate to good correlation between maximal isometric strength and the CSA of the lumbrical muscles. Therefore, we conclude that maximal isometric strength of the lumbrical muscles was positively correlated to the CSA of the lumbrical muscle in each finger, while the measurement of the CSA of the lumbrical muscles, using US protocol in this study, was useful for measuring the CSA of the lumbrical muscles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.828-837
• /
• 2000

The purpose of this study was to evaluate the physical properties and the hand of bast/man made fiber mixed fabrics compared to linen. The mixed fabrics were made by rayon, polyester and modal fiber as warp yarn, and ramie, flax, rayon/flax and cotton/flax as weft yarn. The crease resistance, drape, tensile strength/extension, water absorbancy and warmth retention were measured for test fabrics. The mechanical properties were measured by Kawabata system, and the hand value was calculated by previously developed equation. The results obtained from this study were as follows: The crease resistance and drape properties of bast/man made fiber mixed fabrics were improved compared to those of linen. The tensile strength of polyester/bast fiber mixed fabrics increased compared to those of linen, but rayon/bast and modal/bast fiber mired fabrics decreased. The extension of all mixed fabrics was increased compared to that of linen. The rayon/ramie and modal/ramie mixed fabrics showed lower warmth retention than linen. The mixed fabrics used rayon and modal as warp yarn showed higher water absorbancy than linen. The Koshi and Hari hand value of all mixed fabrics showed lower than those of linen. Fukurami hand value showed little difference between mixed fabrics and linen. Shari, Kishimi, and Shinayakasa hand value of rayon/bast and modal/bast fiber mixed fabrics showed higher than those of linen.

• Geomechanics and Engineering
• /
• v.4 no.4
• /
• pp.281-294
• /
• 2012

Filtration using granular media such as quarried sand, anthracite and granular activated carbon is a well-known technique used in both water and wastewater treatment. A relatively new pre-filtration method called pebble matrix filtration (PMF) technology has been proved effective in treating high turbidity water during heavy rain periods that occur in many parts of the world. Sand and pebbles are the principal filter media used in PMF laboratory and pilot field trials conducted in the UK, Papua New Guinea and Serbia. However during first full-scale trials at a water treatment plant in Sri Lanka in 2008, problems were encountered in sourcing the required uniform size and shape of pebbles due to cost, scarcity and Government regulations on pebble dredging. As an alternative to pebbles, hand-made clay pebbles (balls) were fired in a kiln and their performance evaluated for the sustainability of the PMF system. These clay balls within a filter bed are subjected to stresses due to self-weight and overburden, therefore, it is important that clay balls should be able to withstand these stresses in water saturated conditions. In this paper, experimentally determined physical properties including compression failure load (Uniaxial Compressive Strength) and tensile strength at failure (theoretical) of hand-made clay balls are described. Hand-made clay balls fired between the kiln temperatures of $875^{\circ}C$ to $960^{\circ}C$ gave failure loads of between 3.0 kN and 7.1 kN. In another test when clay balls were fired to $1250^{\circ}C$ the failure load was 35.0 kN compared to natural Scottish cobbles with an average failure load of 29.5 kN. The uniaxial compressive strength of clay balls obtained by experiment has been presented in terms of the tensile yield stress of clay balls. Based on the effective stress principle in soil mechanics, a method for the estimation of maximum theoretical load on clay balls used as filter media is proposed and compared with experimental failure loads.