• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.442_443
• /
• 2009

A large wind farm should satisfy the requirements for a grid and accomplish the optimization of the wind farm system. In that point of view, the wind farm intertie protection system, which must consider the Fault Ride-Through (FRT) requirement for more reliable protection, should be improved. This paper proposes a modified distance relay suitable for protection of a wind farm intertie considering a FRT requirement. The frequency change is used to discriminate the intertie fault from a outside zone fault. The performance of the proposed algorithm is verified using a PSCAD/EMTDC simulator.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.318-319
• /
• 2006

기존에 사용되고 있는 ITO(Indium-Tin-Oxide)의 저항보다 낮은 저항을 가지는 AZO(ZnO-Ag-ZnO) 전극을 Top emission 방식의 OLED(organic light emitting diode)에 적용하여 발광 소자를 제작하였다. AZO박막은 기존의 ITO박막이 수십 ${\Omega}$을 나타내던 것과 비교하여 $8{\Omega}$으로 매우 낮은 저항을 나타내었다. 투과율은 84%로 기존의 ITO박막과 유사한 성능을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.313-314
• /
• 2006

In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated Results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLED) application.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.111-118
• /
• 2006

The elastic buckling strength of a corrugated culvert made of orthotropic material such as FRP was evaluated. The height and length of a corrugated wave and the thickness of the culvert were considered as factors affecting the buckling strength of the culvert. And also, the ratio of the longitudinal stiffness and transverse stiffness was considered as the parameter affecting on the buckling strength of the used orthotropic material. Buckling strengths of various corrugated culvert models with different shapes and stiffness ratio were evaluated by FE analyses and a formula to estimate the elastic buckling strength was suggested from the regression with FE analysis results. Analysis results show that a corrugated culvert has superior buckling strength to a general flat pipe and the suggested formula estimates accurate buckling strength of the corrugated culverts made of orthotropic material.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.1
• /
• pp.25-31
• /
• 2008

This paper is written for foundation of standard <Shanghan Lun> text to research febrile disease referring from <Jin-gui-yu-han-jing>, Kang-ping-ben, Tang-ben, Song-ben and supplementarily Gui-lin-gu-ben. Through the comparative and analytical investigation of 30 articles of ${\ulcorner}$Taiyang bing Volume 1${\lrcorner}$, 22 articles were newly compiled after getting rid of doubtful sentences or putting together. Also, one article, "wind damage of Tai-yang give rise to fever and chilling", was added from Tang-ben. And many articles were unchanged or in some case, collected together with relevant articles to make sense more.

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2009.04a
• /
• pp.239-239
• /
• 2009

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2004.05a
• /
• pp.122-122
• /
• 2004

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.498-499
• /
• 2007

금속 비저항의 측정방법은 4단자 방법을 비롯한 van der Pauw 방법, Four-Point Probe(FPP) 방법, eddy current 방법 등이 사용되고 있으며, 시료의 혈상과 크기에 따라서 그 측정방법은 각각 다르다. 본 연구에서는 그 중 4단자 방법에 의한 정밀측정방법과 측정불확도 평가에 관하여 고찰하였다. 4단자 방법은 시료가 바(bar)나 봉(rod) 형상이면 측정이 가능하며, 시료의 정밀가공과 측정기술을 통하여 측정 불확도를 줄일 수 있다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.929-930
• /
• 2007

박막재료 및 반도체의 면저항 측정에는 주로 Four Point Probe(FPP) 원리를 이용한 측정기를 사용하고 있다. FPP에 의한 측정방식은 single 및 dual configuration method가 있으며, dual configuration은 single configuration에 비해 probe spacing 변화나 시료의 가장자리 효과 등에서 측정편차가 적은 장점이 있어서 dual configuration 기술을 사용하는 추세이다. 개발된 휴대용 면저항 측정기는 dual configuration원리를 적용하여 제작되었으며, 박막재료의 면저항을 누구나 쉽고 정확하게 측정할 수 있도록 설계되었다. 또한 시료의 크기가 핀 간격에 비해 5배 이상 크면 보정계수를 거의 무시할 수 있는 장점이 있어 작은 시료라도 정확한 면저항을 측정할 수 있다. 이측정기의 측정 불확도는 지시값의 1 % 이하이고, 측정범위는 (2$\sim$2000)$\Omega/sq$이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

4단자 방법과 van der Pauw 측정방법으로 자성금속(Fe)과 비자성금속(SUS316)에 대한 전기 비저항을 시험한 결과 van der Pauw 방법에 의한 측정결과를 기준값으로 비교하였을 때, 전극 간격이 시료 단위면적 총길이의 3배에 해당하는 위치에서 비저항 값이 일치하였으며, 이를 도전율로 환산하였을 때 전극 간격이 좁을 수 록 도전율은 크게 나타났다.