• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.119-123
• /
• 2007

Ventilation performance in the storage hall of Janggyeongpan Jeon has maintained for more than 600 years. Janggyeongpan Jeon in Haein temple has window structure of bi-level ventilating opening which consists of upper and lower window. Also, different size and shape of windows are adopted for various locations of the hall. In the present study, to analyze effect of shape of windows on ventilation performance in the storage hall, various design alternatives were considered. Numerical analysis of ventilation in the storage hall was investigated under the same simulation condition except for the shape of windows. Through the comparison of numerical results for various window designs, it was evaluated that the current windows shape gives best ventilation performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1070-1076
• /
• 2001

In this study, the room acoustics of a hall in Kimhae Performing Arts Center is discussed. The hall is designed as a multi-purpose hall. The reverberation time of the hall is varied by absorptive/reflective surfaces. A design method using both objective and subjective evaluations is investigated. As a result, the geometrical shape and the interior materials are determined.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.137-153
• /
• 2010

Jeongrimsaji as temple remains of Baekje Sabi period, its re-excavation has been carried three times in full scale. As a result, the buildings in left and right of lecture hall was largely identified in 3 forms. First, layout of small buildings in left and right of lecture hall. Second, layput of corridor in left and right of lecture hall. Third, layout of construction site in the north of corridor in left and right of lecture hall. Above second is included into remains of Gorye, the third is included into remains of Baekje - the remains were almost ruined then. The first form and third form in above is different each other in size of buildings, form of layout, and location. It is important to investigate these points: the time of constructing the buildings; what position have the use and function of the buildings in the temple? ; transition process of layout of the Buddhist temple. In this context, of temple remains in Baekje during the 5~7th century, the cases where construction sites in left and right of lecture hall and construction site in the north of corridor are identified, have been reviewed. Based on this review, the use and function of buildings, their transition process were investigated. The survey results show that small buildings in left and right of lecture hall existed in the middle and later period of the 6th century. During the later 6th century ~ the 7th century, construction site in narrow and long square shape was located in left and right of lecture hall instead of small buildings in the north of corridor. Therefore, it is identified that the aforementioned thing is earlier stage and the latter thing is later stage.

• Journal of architectural history
• /
• v.24 no.4
• /
• pp.55-64
• /
• 2015

This paper aimed to identify architectural historical meaning of the brick-constructed platform of the west hall in Hwangnyoungsa buddhist temple site based on studying published the excavation survey report and comparing with other platforms of Silla remains. Mass and height of the building has a hierarchical structure within a buddhist temple site, this is applicable in Hwangnyongsa. So in case of a rank equal to or lower buildings than the west hall, those of platforms were built of brick-constructed. As stone relics, jidaeseoks are very narrow, I think that wooden pagoda and main hall's platform were built of brick in first construction period. West hall's platform was built at the late 6th~the mid of 7th century, these brick-remains were considered as a quite earlier construction period relics. Because in west hall there is no jidaeseok under bricks, and all bricks relics have a rectangular shape.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.12-12
• /
• 2010

The hall probe measurement system was used to measure the critical current distribution of superconducting coated conductor. The system consists of reel to reel moving apparatus, 7 array hall probe, a rotary encoder and permanent magnet. The magnetic field profile across the width of superconducting coated conductor using Bean's critical state model was calculated. The effect of various parameters of the formulas on the magnetic field distribution and the effect of shape and size of artificial defects, which were formed on the surface of SmBa2Cu3O7-d(SmBCO) coated conductor using laser marking system, on the hall probe magnetic field signal of the hall probe measurement system was investigated.

• Journal of architectural history
• /
• v.6 no.3 s.13
• /
• pp.23-44
• /
• 1997

There are two main halls in the Main Palace of the Koryo Dyansty in the 11th and 12th century. One, named Hoekyongjeon, was served only for special ceremony ; hundred Buddhist priests' sermons or receiption of Chinese emperor's letters. The other one, Kondukjeon, was used as ordinary throne hall. The ordinary throne hall was built when the palace was erected at the beginning era of the Koryo Danasty, while the special ceremony hall built after the reconstruction in the 11th century. The throne hall was located at northwest side of the special ceremony hall. Audience chamber and King's bedroom were located at west and northwest side of the throne hall. The basic layout of the Palace showed unsymmetrical shape. It seemed mainly effected by its undulating terraine. The acess road from main gate to the throne hall showed zigzag way, by following a stream penetrating the site obliquely, It could be said that the Main Palace of the Koryo Danasty achieved its originality on the aspect of unsymmetrical layout and zigzag acess road, which was not found in the former palaces.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.506-510
• /
• 2017

One of the characteristics of polycrystalline graphene that determines its material properties is grain size. Mechanical properties such as Young's modulus, yield strain and tensile strength depend on the grain size and show a reverse Hall-Petch effect at small grain size limit for some properties under certain conditions. While there is agreement on the grain size effect for Young's modulus and yield strain, certain MD simulations have led to disagreement for tensile strength. Song et al. showed a decreasing behavior for tensile strength, that is, a pseudo Hall-Petch effect for the small grain size domain up to 5 nm. On the other hand, Sha et al. showed an increasing behavior, a reverse Hall-Petch effect, for grain size domain up to 10 nm. Mortazavi et al. also showed results similar to those of Sha et al. We suspect that the main difference of these two inconsistent results is due to the different modeling. The modeling of polycrystalline graphene with regular size and (hexagonal) shape shows the pseudo Hall-Petch effect, while the modeling with random size and shape shows the reverse Hall-Petch effect. Therefore, this study is conducted to confirm that different modeling is the main reason for the different behavior of tensile strength of the polycrystalline structures. We conducted MD simulations with models derived from the Voronoi tessellation for two types of grain size distributions. One type is grains of relatively similar sizes; the other is grains of random sizes. We found that the pseudo Hall-Petch effect and the reverse Hall-Petch effect of tensile strength were consistently shown for the two different models. We suspect that this result comes from the different crack paths, which are related to the grain patterns in the models.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.30-36
• /
• 2010

Previous researches show that linearly integrated Hall sensor arrays (LIHaS) can detect cracks in the steel structure fast and effectively This paper proposes an algorithm that estimates the size and shape of cracks for the developed LIHaS. In most nondestructive testing (NDT), just crack existence and location are obtained by processing 1-dimensional data from the sensor that scans the object with relative speed in single direction. The proposed method is composed with two steps. The first step is constructing 2-dimensionally mapped data space by combining the converted position data from the time-based scan data with the position information of sensor arrays those are placed in the vertical direction to the scan direction. The second step is applying designed Laplacian filter and smoothing filter to estimate the size and shape of cracks. The experimental results of express train wheels show that the proposed algorithm is not only more reliable and accurate to detecting cracks but also effective to estimate the size and shape of cracks.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.49-58
• /
• 1998

This paper proposes a way to design a multi-purpose hall which can serve as a culture and art space for college students and which can also accommodate college students' behaviour characteristics. The major claims made in this paper are as follows. First the hall should be located where it is easily accessible from major and minor campus facilities. Second friendliness between inside and outside of the hall should be established by providing a Gray Zone such as floor or a yard. Third lobby should have a enough space for the entrance and exit of the hall and for rest and refreshments. Fourth in addition to a fixed stage height-adjustable stage and booth should be provided in order to use the hall space for different use. Fifth in the color aspect high value and low chroma should be used to create tender and friendly atmospher and in the shape aspect a durable natural and functional design should be considered in order to create a modern atmosphere.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.189-202
• /
• 2023

In this study, the acoustic performance was analyzed by architectural shapes of the hall. There are four architectural shapes of halls. They are rectangular, horseshoe, surround, and fan-shape. Eight acoustic parameters were used to determine the acoustic performance. These are RT₆₀, EDT, C₈₀, BQI, LF, G_mid, G₁₂₅ and ITDG. First, measurement data of famous concert halls around the world were analyzed. The correlation coefficient R was obtained by regression analysis of the relationship between the subjective ranking of the halls and the acoustic parameters. It was found that BQI, G, and ITDG have higher correlation coefficients R. Also the average of acoustic parameters for each architectural shape were obtained. The total acoustic performance for each shape was calculated by using the correlation coefficient R as a weight for each acoustic parameters. As a result, rectangular halls and horseshoe halls showed good acoustical performances. Second, 3D models of each architectural shape were created and acoustic simulation had been performed. The simulation was performed by creating 3D models of each four shapes of concert halls with the same volume and sound absorption coefficient. Listening test was carried out using the sound source which is created from impulse responses of 3D model. As a result, rectangular hall and horseshoe hall showed the best performance however surround hall and fan-shaped hall showed relatively poor performance.