• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.133-134
• /
• 2010

전자전기 제품의 수요가 증가하면서 다양한 전원회로들이 개발되고 있다. 특히 높은 전력밀도와 제작 단가 절감을 위해서 다 출력 컨버터의 개발 연구가 진행되고 있다. 본 논문은 3.3V와 5V 두 가지 출력을 가지는 비대칭 하프브리지 플라이백 컨버터를 제안한다. 제어기 하나를 통해 추가적인 제이기술 없이 간단한 방법으로 출력 전압을 제어하였으며, 다 출력 컨버터에서 문제가 되는 cross regulation 성능을 향상 시켰다. 제안된 다 출력 컨버터는 3.3V/16A, 5V/12A 출력 용량의 시제품 제작을 통해 성능을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1401-1403
• /
• 2005

This paper presents generalized small-signal models for asymmetrically-driven double-ended dc-to-dc converters. The proposed small-signal models include the effects of the parasitic resistances, which have dominant influence on the damping of the secondary power stage double-pole. To confirm the validity of new models, an asymmetrical half-bridge converter with center-taped rectifier and a forward-flyback converter with current doubler rectifier were built, and their performances were compared with the theoretical predictions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.20-26
• /
• 2002

HID(high intensity discharge)lamps include high pressure mercury lamp, high pressure sodium lamp and metal halide lamp. Metal halide lamps have been considered to be one of the most erective light sources. These lamps have good efficiency, good color rendering and good focusing capability. The objective of this research is to alum on the metal halide lamp(MH70W) by the developed electronic ballast with free voltage input(AC 100∼277V). The developed electronic ballast consists of a free voltage input converter, a flyback converter ＆ half-bridge inverter, ignitor ＆ protector and control1er. Experimental results show that developed electronic ballast turns on the metal halide lamp(MH70W) with free voltage input(AC 100∼277V) very well.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.360-361
• /
• 2011

본 논문에서는 단위역률과 고효율을 갖기 위한 단일단 동기정류기형 비대칭 하프브리지 플라이백 컨버터 회로를 제안한다. 제안된 회로에서는 역률 개선단을 통해 입력전류의 리플이 줄어들게 되며, 거의 단위역률에 가까운 고역률을 갖게 된다. 또한 비대칭 펄스폭 변조에 의한 하프브리지 플라이백 DC/DC 컨버터는 영전압 스위칭 (ZVS) 동작을 하게 되며, 출력단에 동기정류기를 사용하여 스위칭에 의한 손실을 줄였다. 출력전압 24V, 최대 출력 200W, 스위칭 주파수 100kHz에서 제안된 컨버터의 성능을 입증하기위해 실험이 진행 되었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.185-190
• /
• 2003

The most shortcoming of metalhalide lamps is what the instant restarting cannot be realized when the arc tube is in the hot condition. The discharge starting voltage of arc tube in the hot condition is much higher than in the cold condition. Therefore it takes about five minutes to restart the metalhalide lamps, that is to say, it is possible to start when the pressure and the temperature are decreased. But, if the lamp is restarted in the hot condition, we must supply the high voltage pulse with 20kV at the both sides of lamp. The proposed electronic ballast is consist of a electromagnetic interference (EMI) filter, a power factor correction (PFC) circuit, a flyback converter, a half-bridge inverter, and a high voltage igniter circuit. By this composition we can restart the lamp with the voltage 20kV, even if the lamp is in the hot condition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.9-15
• /
• 2004

The most shortcoming of metalhalide lamps is what the instant restarting cannot be realized when the arc tube is in the hot condition. The discharge starting voltage of arc tube in the hot condition is much higher than in the cold condition. Therefore it takes about five minutes to restart the metalhalide lamps, that is to say, it is possible to start when the pressure and the temperature are decreased. But, if the lamp is restarted in the hot condition, we must supply the high voltage pulse with 20[kV] at the both electrode of lamp. The proposed electronic ballast is consist of a electromagnetic interference(EMI) filter, a power factor correction(PFC) circuit, a flyback converter, a half-bridge inverter, and a high voltage igniter circuit. By this composition we can start/restart the lamp with the voltage 20[kV], even if the lamp is in the hot condition.