• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.135-139
• /
• 2017

VLCC 추진축계의 선미관 후부 베어링에서 주로 발생하는 발열 사고는 프로펠러 하중이 추진축을 처지게 하여 후방부에 과도한 국부압착압력이 작용하는 것이 주된 원인이다. 최근 VLCC는 엔진 출력이 크고 축 직경이 증가하는 반면 선미관전부 베어링과 후부 베어링 사이의 간격이 상대적으로 짧아져 축계 시스템의 유연성이 저하되는 경향이 있으며, 이로 인해 발열 사고 가능성에 대한 우려가 커지고 있다. 본 연구에서는 선체의 변형에 대한 축계의 유연성을 확보하기 위한 방안으로 선미관 전부 베어링을 삭제하고 선미관 후부 베어링만을 설치한 새로운 축계 시스템의 적용 가능성을 검토하였다. 국부압착압력의 계산에 있어서는 접촉 너비를 따라 반 타원 형상의 압력 분포를 가정한 Hertzian 접촉 조건을 도입하였으며, 엔진 가동 상태의 프로펠러 하중, 열 효과 및 선체 변형을 고려하였다. 제안된 축계 시스템에 대한 해석을 통해 선미관 후부 베어링의 축 접촉면 재료인 화이트 메탈에 부분 경사를 추가 시공함으로써 설계 요구 조건이 만족됨을 확인하였다. 제안된 축계 시스템의 적용을 통해 발열 사고 예방을 위한 축계 유연성 확보 뿐 만 아니라 시스템의 단순화를 통한 설치비용의 감소 등 부가적인 효과도 기대할 수 있다.

• Archives of Reconstructive Microsurgery
• /
• 제24권1호
• /
• pp.16-19
• /
• 2015

The authors had five cases of penoplasty from more than half of the scrotum to the suprapubic region using a fasciocutaneous radial forearm free flap (RFFF) after extensive excision of sclerosing lipogranuloma. Although the harvested RFFF was a rectangular shape, the authors made the shape of scrotum, penile shaft, and suprapubic region by using well designed geometry and several quilting sutures on junction of scrotum and penis. The contour of scrotum and penis was well maintained, and there were no complications, such as scrotal contracture, penile deformity, and erectile dysfunction during the one year follow up period in all five cases. There were no recurrent lesions and no need for further surgery.

• 한국소음진동공학회논문집
• /
• 제13권11호
• /
• pp.852-859
• /
• 2003

In order to meet the growing demands for higher storage density as well as lower noise level, the spindles in hard disk drives are to be supported by hydrodynamic bearings in place of conventional ball-type ones. However, the existing models are inappropriate to apply to accurate prediction of vibration characteristics because the HDD spindle tends to take quite a complex shape to secure its performance and cost-effectiveness. In this context, this paper treats analysis of free and forced vibrations of such-designed HDD spindles based on more sophisticated models and validations via experiments. Remarkably, to this end all the components in the system are modeled as elastic adopting the finite element method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.826-829
• /
• 1995

The oil-pressure type torque sensor has been adopted in steering system of major automobiles. However, it has been well known that this type of torque sensor needed many subcomponents and produced inaccurate responses. This paper intends to suggest new type of torque sensor based on the shape design by using finite element. A dedicated mesh generation, analysis and post result display program has been developed. As for shape design purpose, the half shape of torque sensor is considered. The result of this study has shown that the design automation for precise torque sensor for control of high velocity rotation shaft can be achieved whithout any expensive investment to the design software.

• 대한기계학회논문집B
• /
• 제33권12호
• /
• pp.933-938
• /
• 2009

Hot test of a full-scale turbopump for a 30-ton-thrust liquid rocket engine was carried out. The turbopump is composed of an oxidizer pump, a fuel pump, and a turbine on a single shaft. Model fluid was used in the test, that is, hot air for the turbine and water for the pumps. The turbopump was operated stably at full speed for 120 seconds. In terms of performance characteristics of pumps and turbine, the results from the turbopump assembly test are compared with those from the turbopump component tests which were performed at about half of the design rotational speed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.375-380
• /
• 2001

MF is a half shaft blast furnace which has been developed at Mitsui Miike Smelter in the 1960’s to treat vertical retort residue. The MF has also been tested for treatment of various recycling materials and wastes. Now various secondaries and wastes (EAF dust, zinc leaching residue, Cu sludge, etc ) are mainly treated. Powder materials are briquetted with reductant before being fed to the furnace. Products are crude zinc oxide, matte, non-hazardous slag and steam. Zinc and lead are recovered in oxide dust, and copper and silver are recovered in matte. The MF can be widely applied to many kinds of materials which contain such non-ferrous metal-valuables. In addition, the improvement in operation and technology has effectively made the unit capacity much larger. The MF now has many advantages for these treatment processes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.598-604
• /
• 2003

In order to meet the growing demands for higher storage density as well as lower noise level, the spindles In hard disk drives are to be supported by hydrodynamic bearings in place of conventional ones. However, the existing models are inappropriate to apply to accurate Prediction or vibration characteristics because the Inn spindle tends to take quite a complex shape to secure the performance of the new type bearings. In this context, this paper treats analysis of free and forced vibrations of such-designed HDD spindles based on more sophisticated models and validation by means of experiments. Remarkably, to this end each component in the system is modeled as elastic adopting the finite element method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1522-1524
• /
• 2004

The wind turbine captures the wind's kinetic energy in a rotor consisting of two or more blades mechanically coupled to an electrical generator. In this paper is proposed models for wind energy power plants using V.A.W.T. and complex concepts using shapes of a half cylinder for blades. A familiar configuration for a drag-type wind machine is shown this paper. In this simple machine, kinetic energy in the wind is converted into mechanical energy in a vertical rotating shaft.

• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.169-174
• /
• 2018

A multi-stage compressor (MSC) is comprised of several impellers installed in the pinion gear shaft driven by a main bull gear. In the pinion shaft, a thrust collar (TC) is installed to support the thrust load. The TC makes the lubrication system simpler in the MSC; therefore, it is widely used in similar kinds of machinery. Typically, TCs are installed on both sides of the bull gear and pressure is developed in the lubricated area by creating a taper angle on the TC and bull gear surface. In the current study, we developed a numerical analysis model to evaluate the performance of the TC considering its design parameters. We sloved the Reynolds equation using the finite element method and applied the half Sommerfeld condition to consider cavitation. Based on the pressure calculated in the lubricated area, we calculated the power loss and minimum film thickness. In addition, we calculated stiffness and damping using perturbation method. We performed parametric studies using the developed model. The results of the analysis show that the maximum pressure presents in the center area of the TC and it increases with the taper angle. The area over which pressure is developed decreases with the taper angle. The results also show that there is an optimum taper angle providing minimum power loss and maximum film thickness. Additionally, the stiffness and damping decrease with the taper angle. As the applied load increases, the power loss increases and the minimum film thickness decreases. However, the stiffness and damping increase with the applied load.

• 대한골관절종양학회지
• /
• 제3권2호
• /
• pp.112-118
• /
• 1997

Multicentric chondrosarcoma other than the mesenchymal subtype is rare separate entity. We experienced a case with nonmonomelic synchronous multicentric chondrosarcoma without any preexisting lesions of Oilier's disease or Maffucci's syndrome. To our knowledge, there was no report of synchronous nonmonomelic multicentric chondrosarcoma. A thirty-three year old man had right distal thigh pain of one and half year. Bone scan showed hot lesions on medial condyle of right femur and shaft of left femur. Plain X-ray showed osteolytic lesion on right femur and slight cortical thickening and calcific lesion was observed on left femoral shaft. Curettage and bone cement filling was done on both lesions. The pathology reports were grade I chondrosarcoma on both side of femur. At one month from operation, pathologic fracture of left femur occurred on bone cement-host bone junction. Conservative treatment and radiotherapy of 60Gy was done. At 8 months from operation, nonunion was evident. Segmental resection of left femur with contralateral fibula graft and second look operation on right condyle lesion were done. At 6 months from revision, fracture occurred at host-graft bone junction. We removed previous hardware and applied long DCP and massive autogenous bone graft. Afterwards, the patient looks good and union was progressing. But at 4 years from last operation, hypertrophic nonunion occurred. Another revision was done with condylar plate and bone graft and now he is well without any sign of local recurrence or metastasis.