• 제목/요약/키워드: Hair-pin

검색결과 53건 처리시간 0.023초

λ/4 Hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기의 설계 (The Design of LTCC MLC Bandpass Filters using λ/4 Hair-pin Resonators)

  • 성규제;여동훈
    • 한국전자파학회논문지
    • /
    • 제14권1호
    • /
    • pp.14-19
    • /
    • 2003
  • 본 논문에서는 λ/4 hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기를 제안하였다. λ/4 hair-pin 공진기는 부분적인 평행 결합선로와 그 선폭이 동일한 전송선로로 구성되어, 등가적으로 SIR이 되므로 기존의 SIR과 달리 구조적인 불연속 없이 공진기의 크기를 소형화할 수 있다. 부가적인 용량성 결합을 포함한 λ/4 hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기의 등가회로를 유도하고, 설계 절차를 기술하였다 1.8 GHz대역에서 2단의 대역통과 여파기를 설계, 제작하였다.

Aperture를 이용한 Hair Pin 발진기의 위상잡음 개선에 관한 연구 (A Novel Phase Noise Reduction in Hair Pin Oscillator Using Aperture)

  • 장욱태;서철헌;오익수
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.28-32
    • /
    • 2003
  • Aperture has been employed on the ground plane in the Hair Pin resonator. Aperture made by etching the part of the ground effected coupling coefficient and then quality factor of Hair Pin resonator has been increased. When the hair pin oscillator using aperture has been compared with the conventional hair pin oscillator using microstrip, it has been improved the phase noise about 19dBc @100KHz. Oscillation frequency of the hair pin oscillator using aperture has been 5.83GHz band and output power is -4.33dBm.

  • PDF

λ/4 Hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기의 설계 (The Design of LTCC MLC Bandpass Filters Using λ/4 Hair-pin Resonators)

  • 성규제;여동훈
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
    • /
    • pp.39-43
    • /
    • 2002
  • In this thesis, a λ/4 hair-pin resonator is proposed to reduce the size of resonators. A LTCC MLC bandpass filter is designed using the λ/4 hair-pin resonators. The electromagnetic coupling structure between two planar resonators is analysed. The equivalent circuit is derived to explain the behavior of the LTCC MLC bandpass filter using λ/4 hair-pin resonators. A design procedure is also described. The simulated and measured results of 2-pole bandpass filter are presented.

  • PDF

10 Gbps SDH 광전송시스템을 위한 클럭보상/데이타 재생회로용 전압제어 hair-pin 공진 발진기의 설계 (A design of voltage controlled hair-pin resonator oscillator for the use of clock precovery/data regeneration circuit in 10 Gbps SDH fiber optic systems)

  • 연영호;이수열;이주열;유태완;박문수;홍의석
    • 한국통신학회논문지
    • /
    • 제21권5호
    • /
    • pp.1304-1316
    • /
    • 1996
  • In this paper, A VCO(Voltage Controlled Oscillator) in use of clock recovery/data regeneration circuit for 10 Gbps fiber optic receivers was developed. The improved hair-pin resonator with a parallel coupled lines, which has been applied to microstrip filters, was used as a resonance part. As a frequcncy tuning device by substituting 3-terminalMESFET vaaractor for varactor diode, an MMIC manufacturing process will be simplified. Since a hair-pin resonator is planar type compared to the dielectric resonator and has a relatively flat reactance verus frequency, it will be favorable to apply a hair-pin resonator to an MMIC, in addition wideband frequency tuning range is able to be obtained.

  • PDF

맨드릴을 사용한 굽힘 성형시 헤어핀용 동관의 변형 해석 (Deformation analysis of copper pipe for hair pin under the bending forming using the Mandrel)

  • 김광영;윤두표
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1630-1633
    • /
    • 2003
  • Hair pin bending machine is pipe forming machine consisting of heat exchanger product system. Hair pin produced by these machine is pathway of refrigerant and play a important role improving the performance and productivity of heat exchanger. The core technology of hair pin bending machine is forming the straight pipe into U-type without any defaults. Therefore, this paper study the relation between the pipe bending forming and the shape and position of mandrel using the elastic-plastic finite element analysis and provide a foundation technology for which developing the hair pin bending machine. The results are followed 1. Mandrel located in front of rotating center of bending die minimized the circular shape variation of copper pipe. 2. Diameter change of mandrel hardly effect the pipe shape.

  • PDF

Comparative Performances between Hair-pin Shaped Microstrip-line Resonator and Dielectric Resonator for Injection Locked Oscillators at 11GHz

  • Lee, Du-Han;Kim, Kye-Hun;Kim, Nam-Youn;Kim, Jong-Heon;Hong, Ui-Seok
    • Journal of Electrical Engineering and information Science
    • /
    • 제2권6호
    • /
    • pp.171-176
    • /
    • 1997
  • A hair-pin shaped microstrip-line resonator and dielectric resonator for injection-locked oscillators have been designed and fabricated for the comparative studying of their performances. In general, a commonly used dielectric resonator shows lower phase noise value than hair-pin resonator in the free-running mode. In the injection-locked mode, however, a hair-pin resonator is superior to the dielectric resonator, the wider tuning range, the 22% improved locking bandwidth, the lower noise effect, the short term stability, and the higher power level. The planar structure of a hair-pin shaped microstrip-line resonator will be easily applied to monolithic microwave integrated circuits.

  • PDF

2차 고조파의 병렬 궤환을 이용한 새로운 구조의 전압 제어 Hair-pin 공진 발진기에 관한 연구 (A Study on the new structure Voltage Controlled Hair-pin Resonator Oscillator using parallel feedback of second-harmonic)

  • 민준기;하성재;이근태;안창돈;홍의석
    • 한국통신학회논문지
    • /
    • 제27권5C호
    • /
    • pp.530-534
    • /
    • 2002
  • 본 논문에서는 발진기의 안정도를 높이기 위해 2차 고조파를 병렬 궤환하는 새로운 구조로 자체 위상고정의 효과를 나타낼 수 있도록 제안하였다. 이 구조는 Hair-Pin 공진 발진기를 사용한 대역통과 여파기, 방향성 결합기, 기본주파수 발진기, 체배기, 그리고 출력전력의 궤환 및 격리를 위한 Wilkinson 전력분배기로 구성되었다. 제안된 발진기는 19.5GHz에서 2.5dBm의 출력을 나타내었으며 기본 주파수 억압 -25 dBc, 위상잡음은 중심주파수 19.5 GHz의 10 kHz offset 지점에서 -76.52 dBc/Hz의 안정된 특성을 얻었다.

Comparativy Characteristics between Microstrip-Line Resonator(HR) and Dielectric Resonator(DR) for Injection-Locked Oscillators (ILOs)

  • Kim, Nam-Young;Kim, Jong-Heon;Hong, Ui-Seok
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 춘계학술대회 논문집
    • /
    • pp.239-244
    • /
    • 1997
  • A hair-pin shaped microstrip-line resonator and a dielectric resonator for injection-locked oscillators have been designed and fabricated for the comparative studying of their characteristics. In general, a commonly used dielectric resonator shows lower phase noise value than hair-pin resonator in the free-running mode. In the injection-locked mode, however, a hair-pin resonator is superior to the dielectric resonator; the wider tuning range, the 22% improved locking bandwidth, the lower noise effect, the short term stability, and the higher power level. The planar structure of a hair-pin shaped microstrip-line resonator will be easily applied to monolithic microwave integrated circuits.

  • PDF

사이즈 감소를 위한 이중대역 PIFA 안테나 설계 및 제작 (Design and Fabrication of Dualband PIFA for size reduction)

  • 임동철;박효달
    • 한국통신학회논문지
    • /
    • 제31권9A호
    • /
    • pp.900-905
    • /
    • 2006
  • 본 논문에서는 $2.40{\sim}2.482GHz$$5.75{\sim}5.85GHz$ 대역의 무선 LAN용 PIFA(Planar Inverted F Antenna) 안테나를 설계 제작하였다. 패치의 사이즈 감소를 위해 hair-pin 구조와 short-pin 구조를 갖도록 하였으며, 접지면과 기판사이에 공기층을 삽입하여 VSWR<2.0에서 적절한 대역을 얻고자 하였다. 설계시 주요 파라미터는 hair-pin 길이, 폭, 위치와 공기층의 두께 및 급전위치였으며 최적화된 파라미터를 가지고 실제 제작 및 측정하였다. 제작된 안테나의 측정결과는 다음과 같다. 공진 주파수는 2.37GHz 와 5.86GHz이고, VSWR<2.0에서 각각 약 90MHz 와 350MHz의 대역폭을 얻었으며 $1.91{\sim}4.37dBi$의 이득을 얻었다. 2.4GHz에서 H-평면과 E-평면은 각각 $52.83^{\circ}$$85.90^{\circ}$로 나타났으며 5.8GHz에서 H-평면과 E-평면은 각각 $65.68^{\circ}$$52.143^{\circ}$로 나타났다.

주파수 체배기를 이용한 K-Band용 Hair-pin 발진기 (A K-band Hair-pin Oscillator Using a Frequency Doubler)

  • 현안선;김훈석;김종헌;이종철;김남영;정원채;홍의석
    • 한국전자파학회논문지
    • /
    • 제9권6호
    • /
    • pp.833-842
    • /
    • 1998
  • 본 논문에서는 hair-pin 공진기, GaAs MESFET, 그리고 주파수 체배기로 구성된 K-Band용 발진기가 제안 되며, 하이브리드 초고주파 집적회로(HMIC) 형태로 제작되고 그 마이크로파 동작 특성이 발표된다. $\lambda_g$/4 개방 스터브가 벼ir-pin 공진 발진기의 출력인 9GHz의 기본 주파수를 억제하기 위해 주파수 체배기에서 사 용되며I 출력 정합 회로가 2차 고조파 주파수인 18 GHz에서 최적화된다. 제안된 발진기는 -083dBm의 출력, -23 dBc의 기본 주파수 억압, 그리고 18.2 GHz에서 -86 dBc/Hz의 위상 잡음을 갖는다

  • PDF