• Korean Journal of Ecology and Environment
• /
• v.47 no.4
• /
• pp.258-272
• /
• 2014

Bats hibernating in caves and unused mines were surveyed during six hibernation periods (from December to February, 2005 and 2011) in Korea. We recorded 13,288 individuals of 11 species at 140 hibernacula (60 caves and 80 abandoned mines): Rhinolophus ferrumequinum (n=3,509), Eptesicus serotinus (n=6), Hypsugo alaschanicus (n=349), Miniopterus fuliginosus (n=5,919), Murina hilgendorfi (n=417), Myotis aurascens (n=294), Myotis bombinus (n=2), Myotis formosus (n=401), Myotis macrodactylus (M.mac, n=151), Myotis petax (n=2,131) and Plecotus ognevi (n=109). We studied the thermal preference and selection of hibernacula of seven dominant bat species. Four species (Myotis petax, Hypsugo alaschanicus, Plecotus ognevi and Murina hilgendorfi) hibernated mainly at the cold site below than $7^{\circ}C$, while three species (Myotis formosus, Rhinolophus ferrumequinum and Miniopterus fuliginosus) hibernated at warm site above than $7^{\circ}C$. Rhinolophus ferrumequinum had broad-ranged temperature zone for their hibernating site. The mean body temperature of each species was $2.64{\pm}0.98^{\circ}C$ for Murina hilgendorfi, $2.76{\pm}1.68^{\circ}C$ for Hypsugo alaschanicus, $2.78{\pm}0.98^{\circ}C$ for Plecotus ognevi, $4.52{\pm}1.02^{\circ}C$ for Myotis petax, $7.83{\pm}1.94^{\circ}C$ for Miniopterus fuliginosus, $9.19{\pm}2.35^{\circ}C$ for Rhinolophus ferrumequinum and $13.64{\pm}0.76^{\circ}C$ for Myotis formosus, respectively. The body temperatures of hibernating bats were closely related to the rock surface temperatures rather than the ambient temperatures. In conclusion, the diversity of bats community in hibernacula were closely related to the range of inner ambient temperature of hibernacula, and more species of bats were occupied at sites presenting a broad range of ambient temperatures.

• Korean Journal of Ecology and Environment
• /
• v.47 no.4
• /
• pp.282-291
• /
• 2014

This study was conducted to make distribution model of the Red-crowned Crane and the White-naped Crane according to the anthropogenic and natural factors affecting distribution of crane in Cheorwon, Korea. It was investigated that the impact power and its range of the indirect anthropogenic influence to feeding flock density in cranes from the road, residential area, military facilities, civilian control zone (CCZ), greenhouse and natural influence such as roosting site and available feeding area. Available feeding area is the most important factor for the crane's feeding site selection. The feeding flock density of the cranes near the residential area was lower than that of area far from the area, and tended to increase within 2.5 km distance. The increasing tendencies of feeding flock density from military facilities and high traffic volume road were similar, but the density in military facilities increased within 800 m, and the density from high traffic volume road increased within 2 km. These results suggested that residential area, military facilities and the road with high traffic volume had significant effect on foraging densities to the certain range. As the distance from the road with low traffic volume and roosting site increased, feeding flock density tended to decrease. The density of Red-crowned crane and White-naped crane inside the CCZ were respectively higher than those of outside the CCZ, especially for the Red-crowned crane. As a result, density of Red crowned cranes inside the CCZ was 5.2 times higher than that of outside, while that of white-naped cranes was 2.2 times bigger. If the density of greenhouse is lower than $40km^{-2}$, crane's feeding flock density in the low greenhouses density area was higher than that of high greenhouses density area. However, there was no difference in the feeding flock density if the density of the green houses is higher than $40km^{-2}$. The model for the Red-crowned Crane was related with available feeding area, distance from residential area, civilian control zone and distance from high traffic road. The model of the White-naped Crane was related with available feeding area, distance from roosting site and distance from lake. Finally, the estimated feeding flock density of cranes significantly correlated with density model according to the natural and anthropogenic factors.

• Korean Journal of Food Science and Technology
• /
• v.49 no.5
• /
• pp.550-558
• /
• 2017

The effect of Artemisia argyi H. under liquid-state fermentation by Monascus purpureus (AAFM) on cognitive impairments has been studied in a mice model of diabetes-associated cognitive decline induced by streptozotocin (STZ). C57BL/6 mice (9 weeks of age, male) were separated into four groups: a normal control, STZ-induced diabetic mouse group (STZ group), Artemisia argyi H. (AA) 10 group (diabetic mouse+AA 10 mg/kg/day), AAFM 10 group (diabetic mouse+AAFM 10 mg/kg/day). Administration of AA and AAFM significantly improved glucose tolerance, as shown by the intraperitoneal glucose tolerance test (IPGTT), and ameliorated cognitive deficit, as shown by the behavioral tests including passive avoidance, Morris water maze, and Y-maze tests. After behavioral tests, the cholinergic system was examined by assessment of the acetylcholine (ACh) level and acetylcholinesterase (AChE) inhibitory activity, and the antioxidant system was also assessed by measuring malondialdehyde (MDA) and superoxide dismutase (SOD) levels in the brain and liver.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1215-1226
• /
• 2011

The objective of this study was to investigate the anti-obesity and lipid-lowering effects of extracts of persimmon leaf (PWE), buckwheat leaf (BWE), and chinese matrimony vine leaf (LWE) in rats fed a high-fat diet (HFD). Male Sprague-Dawley rats (n=40) were divided into four groups: HFD (35% fat, w/w), HFD (38.5% fat, w/w) supplemented with PWE (10%, w/w), BWE (10%, w/w), and LWE (10%, w/w) groups. The epididymal, perirenal, and interscapular white adipose tissue (WAT) weights as well as plasma leptin level were lowest in the LWE group. Supplementation with PWE and BWE also tended to lower the perirenal and retroperitonal WAT weights compared to the HFD control group, and there was a significant decrease in plasma leptin concentration. Furthermore, plasma triglyceride concentration, hepatic cholesterol content, and hepatic lipid droplet accumulation were significantly lower in the PWE, BWE, and LWE groups than in the HFD group. BWE supplementation markedly lowered plasma total cholesterol concentration, although there were no significant differences in plasma HDL-cholesterol concentration and ratio of HDL-cholesterol/total cholesterol among the groups. Hepatic HMG-CoA reductase activity was significantly higher in the PWE and LWE groups than in the HFD group, and hepatic ACAT was not changed by extract supplementation. However, supplementation with PWE, BWE, and LWE significantly increased fecal acidic sterol content in rats fed a HFD. These results suggest that supplementation with PWE, BWE, and LWE may be an effective anti-obesity strategy by lowering body fat weight and improving plasma and hepatic lipid profiles in HFD-fed rats.