• Journal of Microbiology and Biotechnology
• /
• v.25 no.8
• /
• pp.1234-1240
• /
• 2015

Heat shock RNA 1 (HSR1) is described as a "eukaryotic heat-sensing noncoding RNA" that regulates heat shock response in human and other eukaryotic cells. Highly conserved HSR1 sequences have been identified from humans, hamsters, Drosophila, Caenorhabditis elegans, and Arabidopsis. In a previous study, however, it was suggested that HSR1 had originated from a bacterial genome. HSR1 showed no detectible nucleotide sequence similarity to any eukaryotic sequences but harbored a protein coding region that showed amino-acid sequence similarity to bacterial voltage-gated chloride channel proteins. The bacterial origin of HSR1 was not convincible because the nucleotide sequence similarity was marginal. In this study, we have found that a genomic contig sequence of Comamonas testosteroni strain JL14 contained a sequence virtually identical to that of HSR1, decisively confirming the bacterial origin of HSR1. Thus, HSR1 is an exogenous RNA, which can ectopically trigger heat shock response in eukaryotes. Therefore, it is no longer appropriate to cite HSR1 as a "eukaryotic functional noncoding RNA."

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.109-124
• /
• 2015

A novel approach, hybrid surface rainfall (KNU-HSR) technique developed by Kyungpook Natinal University, was utilized for improving the radar rainfall estimation. The KNU-HSR technique estimates radar rainfall at a 2D hybrid surface consistings of the lowest radar bins that is immune to ground clutter contaminations and significant beam blockage. Two HSR techniques, static and dynamic HSRs, were compared and evaluated in this study. Static HSR technique utilizes beam blockage map and ground clutter map to yield the hybrid surface whereas dynamic HSR technique additionally applies quality index map that are derived from the fuzzy logic algorithm for a quality control in real time. The performances of two HSRs were evaluated by correlation coefficient (CORR), total ratio (RATIO), mean bias (BIAS), normalized standard deviation (NSD), and mean relative error (MRE) for ten rain cases. Dynamic HSR (CORR=0.88, BIAS= $-0.24mm\;hr^{-1}$, NSD=0.41, MRE=37.6%) shows better performances than static HSR without correction of reflectivity calibration bias (CORR=0.87, BIAS= $-2.94mm\;hr^{-1}$, NSD=0.76, MRE=58.4%) for all skill scores. Dynamic HSR technique overestimates surface rainfall at near range whereas it underestimates rainfall at far ranges due to the effects of beam broadening and increasing the radar beam height. In terms of NSD and MRE, dynamic HSR shows the best results regardless of the distance from radar. Static HSR significantly overestimates a surface rainfall at weaker rainfall intensity. However, RATIO of dynamic HSR remains almost 1.0 for all ranges of rainfall intensity. After correcting system bias of reflectivity, NSD and MRE of dynamic HSR are improved by about 20 and 15%, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.14-25
• /
• 2018

The operation of high-speed rail (HSR) has an effect on the agglomeration economies, and the impact is shown as a relocation of individual firm and worker to where business activity can be maximized. The proximity to the HSR station could be considered as a core district to maximize the industrial benefit through the HSR network. From this perspective, this study considers the agglomeration effect of HSR within the HSR station-area and analyzed the agglomerated spatial pattern through hotspot analysis by service industry in the cases of Korea and Japan using GIS. This study analyzed the service industry within 1km distance from 8 HSR stations of Korea and 4 Kyushu Shinkansen stations of Japan. The results suggest that the hotspot patterns are observed in the service industry within 1km distance from the HSR station of Korea and Japan, except for two HSR stations of Gupo station and Kagoshima-Chuo station. Leisure, amusement, association, and other specific service industries could be affected by HSR passengers and knowledge-spillovers through HSR station. Therefore, the observed hotspot districts near the HSR station-area could explain an agglomeration pattern of the service industry through a closeness to the HSR station. Further, we could expect that the impact of HSR affects the service industry, and the impact could attract business activities of the service-area to maximize their benefit from HSR travelers. With the result, it is required to build up a supportive policy to maximize the HSR's impact on the service industry when considering the HSR station-area development.

• International Journal of Railway
• /
• v.6 no.1
• /
• pp.26-31
• /
• 2013

Following the success of the KTX (Korea's first high-speed rail system) with a maximum operating speed of 300 km/h opened in 2004, experts in Korea started a research on the development of key technologies for high-speed rail (HSR) with a top speed of 500 km/h. This paper is a preliminary analysis of the research. It first reviews HSR experiences around the world, in terms of traffic and economic impacts of HSR, and presents a preliminary analysis of 500 km/h HSR in Korea. It is estimated that introduction of 500 km/h HSR with a 54% of travel time reduction will increase HSR passengers to about 9.8 million (about 78% of market share) between Seoul and Busan. It is a 23% of growth compared to the base scenario. Along with conventional rail passengers, air passengers are expected to be significantly impacted by the 500 km/h HSR. As a function of HSR travel time, the estimated market shares of both KTX and 500 km/h HSR compared to air are very comparable with previous international experiences. Based on the forecasted traffic, estimated total benefits are $758 million per year.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.04a
• /
• pp.65-71
• /
• 2009

The process of cold rolling is becoming more severe with the increase in the production of high tensile steel strip as a result of increased demand. Consequently, there is a need to develop work roll materials with better resistance to wear and roll failure. DOOSAN has developed an improved in-house 5%Cr alloy, New HSR1, with properties superior to the existing in- house 5%Cr alloy, Old HSR1. Test alloys were designed with controlled amounts of Si and Mn based on Old HSR1 and an optimum alloy was chosen based on thermal shock tests. A prototype work roll was manufactured with New HSR1, and properties of test specimens were evaluated. The results indicated that New HSR1 has better properties than Old HSR1. After application of New HSR1 work rolls, productivity increased due to advanced resistance to wear and roll failure.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.123-131
• /
• 2016

The high-availability seamless redundancy (HSR) protocol is one of the most important redundancy IEC standards that has garnered a great deal of attention because it offers a redundancy with zero recovery time, which is a feature that is required by most of the modern substation, smart grid, and industrial field applications. However, the HSR protocol consumes a lot of network bandwidth compared to the Ethernet standard. This is due to the duplication process for every sent frame in the HSR networks. In this paper, a novel algorithm known as the reducing multicast traffic (RMT) is presented to reduce the unnecessary redundant multicast traffic in HSR networks by limiting the spreading of the multicast traffic to only the rings that have members associated with that traffic instead of spreading the traffic into all the network parts, as occurs in the standard HSR protocol. The mathematical and the simulation analyses show that the RMT algorithm offers a traffic reduction percentage with a range of about 60-87% compared to the standard HSR protocol. Consequently, the RMT algorithm will increase the network performance by freeing more bandwidth so as to reduce HSR network congestion and also to minimize any intervention from the network administrator that would be required when using traditional traffic filtering techniques.

• The Korean Journal of Health Service Management
• /
• v.13 no.2
• /
• pp.1-14
• /
• 2019

Objectives: This study was conducted to analyze the effect of hospital social responsibility(HSR) activities on organizational health and customer orientation. Methods: We conducted an online survey with hospital employees and analyzed the questionnaires of 206 selected respondents. A regression analysis was performed to determine the relationship between independent and dependent variables. Results: First, 'consumer issues', 'community involvement and development', and 'fair operating practice' factors in HSR influenced 'medical environment suitability' in organizational health. The 'fair operating practice' factor in HSR affected 'management environment suitability' and 'community orientation' in organizational health. The 'labor practices' factor in HSR affected 'practices suitability' and 'vitality' in organizational health. Second, the activities on 'consumer issues' and 'environment' in HSR have influenced 'Reliability', 'Reactivity' and 'Tangibility' in Customer Orientation. The activities on 'consumer issues' have affected 'Empathy'. Conclusions: The results of this study provide a positive direction for medical institutions as they conduct HSR activities and provide a basis for establishing effective HSR strategies.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.34
• /
• pp.23-37
• /
• 2007

Since 1964, HSR, which was opened in Japan, has had a hoge impact on the world. Historically, HSR has similar characteristics to the Roman Road, which promoted rapid movement and hada great influence on international society as transport infrastructure. Recently the development of HSR has become more rapid because of economic, environmental and external cost concern, emphasizing Environmentally Sustainable Transport(EST). In particular, the external cost has become more important factor for justifying HSR. The successful factors of HSR are high demand and cost minimal construction costs. There are two successful HSR models, the Japanese and the French. The former operates based on high demand oriented and the latter focuses on its minimizing costs. The demand orientated model means HSR carries over 100,000 passengers per day as in Japan and Far East Asian countries. The cost minimized model focuses on lower operation and construction costs as in France. In particular, Germany carries both passengers and freight on HSR. The construction costs in Germany are in between those of Japan and France. In future, Korea, Taiwan and China HSR will follow Japan's successful model because of high population density and concentration of economic activity along railway lines. This paper supports Vickerman's argument that HSR is justified where there is a demand of between 12 million and 15 million railway passenger a year(about 40thousand persons/day) between two urban center. This will be shown in the future in Korea, in Taiwan and China. Finally, this paper reviews that HSR activates at 250km/h for dedicated new lines and 200km/h for upgraded lines. In particular, it is successful in area of high population density and cost minimizing technology.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.377-377
• /
• 2021

본 연구에서는 기존 대형 강우레이더 관측망에 대한 동해안 지역 관측공백 해소와 집중호우에 의한 재해예방을 목적으로 운영 중인 삼척과 울진 전파강수관측소의 강우추정을 위해 빔차폐 등을 고려한 HSR(Hybrid Surface Rainfall) 추정 기법을 소개하고 지상강우량과 비교 결과를 제시한다. 전파강수관측소의 HSR 추정 기법은 1) 자료 품질관리, 2) 고도별 자료의 병합, 3) 병합 자료 기반 분포형 비차등위상차 산정, 그리고 4) HSR 강우 추정 단계로 이루어진다. 품질관리 과정은 전파강수관측소의 관측자료 중 강우추정에 직접적으로 사용되는 반사도, 차등위상차의 품질을 관리하는 단계이다. 자료 병합 과정에서는 고도별로 품질관리된 반사도와 각 고도의 차등위상차의 레이별 차이를 병합한다. 그리고 병합된 반사도와 차등위상차의 레이별 차이를 이용하여 비차등위상차를 구한다. 마지막으로 산출된 비차등위상차를 이용하여 R-KDP 관계식을 이용하여 HSR을 산출한다 시험적용 결과 제안된 HSR 강우 추정 기법이 강한 강우가 발생한 지역의 강우강도를 잘 추정하는 것으로 확인되었다.

• The Korean Journal of Health Service Management
• /
• v.12 no.4
• /
• pp.1-15
• /
• 2018

Objectives: We analyzed the importance and performance of hospital social responsibility (HSR) according to the characteristics of hospitals, and presented strategies for HSR activities. Methods: An online HSR questionnaire was sent to hospitals nationwide from October 12 to 26, 2018. The 206 responses received were analyzed in accordance with the IPA to assess the performance and importance of HSR. Results: There was a statistically significant difference between the employees and hospitals regarding the importance and performance of HSR activities. In the area of "sustained maintenance", items related to consumer issues such as "compliance with personal information processing policy", "patient confidentiality", "fair information provision", and "system for patient safety and infection prevention" were derived. In the area of "'high priority for improvement", there were three common items between hospitals and general hospitals: "regular donations and support from local communities", "active cooperation with related institutions", and "compliance with process-related laws and regulations". In the area of "low priority", four items were derived: "support for employee participation in community activities", "efforts to hire local residents", "education and cultural programs for local communities", and "transparent support for political activities". In the area of "sublation of excessive efforts", two items of "employee welfare efforts" and "efforts to improve labor relations", were commonly found in hospitals and general hospitals. Conclusions: It is necessary to improve the management efficiency of hospitals by the systematic allocation of manpower and resources through the establishment of four regional strategies based on the results of IPA analysis.