• Journal of the Korean institute of surface engineering
• /
• v.48 no.3
• /
• pp.93-99
• /
• 2015

This test focuses on the correlations between joining axial force at non-room temperature and at room temperature according to the surface treatment (Geomet, Dacro, Green Kote, Armore Galv.). The quality characteristics of the fastening axial force required by the KSB 2819 and EN14399-10 standards were discussed. Surface treatment was implemented to S10T and 10.9HRC sets of bolts under the same environmental factors. Development for the stabilization of the fastening axial force required by each standard should continually be enforced, and the fastening and storage in the field should be maintained at room temperature. Managing stabilization of torque enumerated data is required after application of surface treatment. It is concluded that, by conducting the test of applying surface treatment to effectively manage, each lot-specific rate of axial force at room temperature conditions should be maintained below the maximum 4.47%. The decline rate of axial force should be maintained under 2.15% maximum, and the standard deviation of the room temperature condition should be maintained below 0.5.

• 건축구조
• /
• v.21 no.1
• /
• pp.38-46
• /
• 2014

• 대한치주과학회:학술대회논문집
• /
• 2006.11a
• /
• pp.13-14
• /
• 2006

• Korean Architects
• /
• s.607
• /
• pp.104-113
• /
• 2019

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.394-401
• /
• 2013

A new Rockwell hardness (HRC) model using a volumetric parameter by a least square and fractal interpolation method is suggested. The results are also investigated in comparison to real measured hardness data. For this purpose, the measurement of an indented volume is performed using a confocal laser scanning microscope (CLSM), and the captured height encoded image (HEI) is used as an original surface for the calculation of the indented volume. After configuring the surface, the constructed volume is calculated and used as an independent variable for HRC hardness modeling. The hardness model is established using an experimental modeling technique involving a least square algorithm and fractal interpolating model, and this suggested model can be used to reliably predict the Rockwell hardness. These techniques can also be applied to the modeling of the Brinnell and Vickers hardnesses using a volumetric variable.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.419-426
• /
• 2011

In this study, an experimental and theoretical program were carried out to determine the cutting forces and chip formation at different cutting speeds using a 0.4mm nose radius ceramic insert and -7 rake angle for non heat-treated AISI 4140 (27HRc) and heat-treated AISI 4140 (45 HRc) steel. The results obtained were compared to show the hardness differences between the materials. The secondary deformation zone thicknesses when comparing the two materials show different physical structure but similar size. These results were also discussed in light of the heat treatment and the effects it had on the machining characteristics of the material. In addition, the Oxley Machining Theory was used to predict the cutting forces for these materials and a comparison made. The predicted cutting performances were verified experimentally and showed good agreement with experimental data.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.871-877
• /
• 2012

New materials widely used for automobile related industry, aircraft, space development area are mostly high hardness materials. The hardness value of some hardened materials is over HRC45 and machining of this hardened materials is called as hard turning. Hard turning has its advantage on processing flexibility, cycle time and tool cost reduction. Also this process obtains high efficiency in processing and precise surface roughness through application of the CBN tools. In hard turning process with CBN tool, surface integrity is the important factor for considering the design of machine part and component under high stress and load conditions. A purpose of this study is to analyze optimal condition in hard turning process of AISI 52100 steel (HRC62) with high CBN and low CBN on turning characteristics, tool wear mechanism comparison and surface integrity.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.6
• /
• pp.365-369
• /
• 2004

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.155.1-155.1
• /
• 2000

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.80.2-80.2
• /
• 2012

홀로 고립되어 존재하는 은하는 주변 은하와 상호작용을 하지 않은 채 진화하므로 은하의 진화를 연구하기에 아주 좋은 대상이다. 은하의 정량적 연구를 위해 꼭 알아야 하는 중요한 물리량으로 거리와 성간소광량이 있다. 우리는 허블 우주망원경(HST) Advanced Camera for Surveys(ACS)/High Resolution Channel(HRC)로 관측한 고립된 왜소불규칙은하 NGC 1156 ($RA_{2000}$=02:59:42.19, $DEC_{2000}$=+25:14:14.2) 중심부($26^{\prime\prime}{\times}29^{\prime\prime}$)의 archive 자료를 분석하여 이 은하의 거리와 성간소광량을 새로 구했다. 이 은하의 거리를 측정한 과거 자료는 Tully(1988, Nearby Galaxies Catalog) 목록과 Special Astrophysical Observatory 6m 망원경/VI(각 300s) 영상자료의 가장 밝은 별로 거리를 구한 Karachentsev et al. (1996) 자료 뿐이다. 우리는 HST/ACS/HRC+UBVI 자료 중 U자료를 이용하여 아주 신뢰할 만한 소광량 값($E(B-V)=0.35{\pm}0.05$)을 얻었고, 가장 밝은 빨간 별과 파란 별 자료를 이용하여 새로운 거리지수($(m-M)_0=29.39{\pm}0.20$, $d=7.6{\pm}0.7$ Mpc)를 결정했다. 이 거리 값은 과거의 값들(Tully $6.4{\pm}1.2$ Mpc; Karachentsev et al. $7.8{\pm}0.5$ Mpc)과 크게 다르지 않으며, 기존의 거리 자료들 역시 신뢰할만함을 보여준다. ACS/Wide Field Channel과 달리 ACS/HRC의 경우 등급 표준화 방정식이 완벽하지 않은데, 우리의 경우 F550M자료를 표준화할 수 없었다. 그러나 우리는 여러 파장, 많은 관측자료가 존재하는 47 Tucanae (NGC 104) 구상성단의 관측자료와 Padova 등연령곡선을 이용하여 성공적인 등급변환을 수행할 수 있었다.