• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.6
• /
• pp.1029-1040
• /
• 2015

Effects of punching and drying process on quality of Yukwa were determined. Lightness (L) of Yukwa dough with punching was higher than that with no punching. Air cell distribution of Yukwa dough was fine with higher punching. Microstructure of Yukwa dough showed a broken surface structure with increasing punching. Hardness and adhesiveness of Yukwa dough decreased after 5 min of punching and then increased with higher punching. Expansion ratio of Yukwa base with punching at 155 rpm for 5 min was highest among the samples. Appearance of Yukwa base with no punching showed a poor shape and cross section, whereas Yukwa base with punching at 95 rpm for 10 min showed the best appearance and cross section and Yukwa base with punching at 155 rpm for 5 min also showed good appearance. The moisture content of Yukwa Bandegi after 24 hr of drying was 14.93%. Microstructure of Yukwa Bandegi showed a broken surface structure and empty spaces with increased drying time. Expansion ratio of Yukwa base with 24 hr of drying at $40^{\circ}C$ was highest among the samples. Overall, optimum punching conditions were 10 min of punching at 95 rpm or 5 min of punching at 155 rpm and optimum drying condition was 24 hr of drying at $40^{\circ}C$.

• Asian Journal of Turfgrass Science
• /
• v.21 no.2
• /
• pp.127-135
• /
• 2007

Korea and Japan hosted the FIFA World Cup Soccer Game in 2002. Ten stadiums had been built and more than 30 soccer grounds for practice were renovated in Korea. Sport fields in both countries had problems on cool-season turfgrass growth and quality by summer decline during humid and warm climate especially followed by intensive uses. We measured the effects of air-flow system, which is designed to optimize rootzone soil gas and moisture levels to promote the growth and maintenance turfgrass. This experiment was carried out to verify the effects of the system on soil gas exchange, ground resilience, and turfgrass recovery in turfgrass rootzone. Within 1 or 2hr of operation of the system, rootzone soil gas ($CO_2$, $O_2$) levels returned to natural atmospheric levels completely Soil $CO_2$ levels began to decrease within the first 10 min of operation of the system. The levels were reduced from 1.3 to 0.06% after 30 min, and natural atmospheric levels within 1 hr. When the system was turned off, $CO_2$ levels increased to 0.36% and 0.7% after 5 and 20 hr, respectively. The application of the system did not affect the resilience of turf surface after traffic treatments. Higher traffic treatment resulted in higher surface resilience especially in zoysiagrass plots. Operation of the system had a significant beneficial impact on turf recovery by increased root dry wight and improved turf quality, as compared with the non-operated check plots.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.463-468
• /
• 2021

Single image super-resolution (SISR) is an image processing technique, and its main target is to reconstruct the high-quality or high-resolution (HR) image from the low-quality or low-resolution (LR) image. Currently, deep learning-based convolutional neural network (CNN) image super-resolution approaches achieved remarkable improvement over the previous approaches. Furthermore, earlier approaches used hand designed filter to upscale the LR image into HR image. The design architecture of such approaches is easy, but it introduces the extra unwanted pixels in the reconstructed image. To resolve these issues, we propose novel deep learning-based approach known as Lightweight deep CNN-based approach for Single Image Super-Resolution (LDCSIR). In this paper, we propose a new architecture which is inspired by ResNet with Inception blocks, which significantly drop the computational cost of the model and increase the processing time for reconstructing the HR image. Compared with the other state of the art methods, LDCSIR achieves better performance in terms of quantitively (PSNR/SSIM) and qualitatively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.325-325
• /
• 2020

Low impact development (LID) is a widely used technology that aims to reduce the peak flow volume and amount of pollutants in stormwater runoff while introducing physicochemical, biological or a combination of both mechanisms in order to improve water quality. This research aimed to determine the effect of hydrologic factors in removing the pollutants on stormwater runoff by an LID facility. Monitored storm events from 2010-2018 were analysed to evaluate the hydraulic and hydrological performance of a small constructed wetland (SCW). Standard methods for the examination water and wastewater were employed to assess the water quality of the collected samples (APHA et al, 1992). Primary hydrologic data were obtained from the Korea Meteorological Administration. The recorded average rainfall intensity and antecedent dry days (ADD) of SCW were 5.26 mm/hr and 7 days respectively. During the highest rainfall event (27 mm/hr), the removal efficiency of SCW for all the pollutants was ranging from 67% to 91%. While on the lowest rainfall event (0.7 mm/hr), the removal efficiency was ranging from -36% to 62%. Rainfall intensity has a significant effect to the removal efficiencies of each facility due to its dilution factor. In addition to that, there was no significant correlation of ADD to the mean concentrations of pollutants. Generally, stormwater runoff contains significant amount of pollutants that can cause harmful effects to the environment if not treated. Also, the component of this LID facility such as pre-treatment zone, media filters and vegetation contributed to the effectivity of the LID facilities in reducing the amounts of pollutants present in stormwater runof.

• Journal of Environmental Science International
• /
• v.17 no.10
• /
• pp.1069-1073
• /
• 2008

Indoor air quality can be affected by indoor sources, ventilation, decay and outdoor levels. Although technologies exist to measure these factors, direct measurements are often difficult. The purpose of this study was to develop an alternative method to characterize indoor environmental factors by multiple indoor and outdoor measurements. Using a mass balance model and regression analysis, penetration factor (ventilation rate divided by the sum of ventilation rate and deposition constant) and source strength factor (source strength divided by the sum of ventilation rate and deposition constant) were calculated using multiple indoor and outdoor measurements. Subsequently, the ventilation rate and $NO_2$ generation rate were estimated. Mean of ventilation rate was 1.41 ACH in houses, assuming a residential N02 deposition constant of 0.94 $hr^{-1}$. Mean generation rate of $NO_2$ was 16.5 ppbv/hr. According to house characterization, inside smoking and family number were higher $NO_2$ generation rates, and apartment was higher than single-family house. In conclusion, indoor environmental factors were effectively characterized by this method using multiple indoor and outdoor measurements.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.2
• /
• pp.83-89
• /
• 1998

The drinking water supply in Cheju entirely depends on the ground water and recently the polluted ground water bores are increasing. In 1993 Cheju Province Health-Environment Institute reported that the ground water quality of 26 of 98 bores under the drinking water quality standard. Therefore there are many investigation in the needs of the nitrate removal in the drinking water in the regin with no alternative water resources. In this study, the following results are obtained to remove the nitrate in biofilm filtration process in which uses ethanol as external carbon source. Over 90% of nitrate is removed after 10 days of experiment. The nitrate removal rate on filtration velocity is about 100% at 50m/day and 100m/day, and about 56% at 200m/day. The removal rate is reduced in 27% at 400m/day. Using ethanol as the external carbon source, denitrification kinetic is 1st-order. Denitrification constant k is 8.004($hr^{-1}$). The amount of the denitrificated-Nitrogen is increased as the contact time increased. Deoxydation rate constant ${\gamma}$ is 11.895($hr^{-1}$). 0.968g of ethanol(as TOC) is needed to remove 1g of nitrate and 0.291g is required to remove 1g of dissolved oxygen.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.11-17
• /
• 1993

Corundum single crystals were grown by the Czochralski technique. Relationships between crystal quality and crystal growth factors such as pulling rate, rotation rate and temperature of the melt were investigated. Optimum pulling and rotation rate for high quality corundum single crystal growth were 4.0mm/hr, 30rpm respectively. Pore was a main defect in corundum crystal and also discussed how to remove this defect by melt temperature control. Growth direction of as grown crystals was identified with(0001). And this direction had largest growth rate. Room temperature absorption spectra were measured and discussed for Cr3+ion doped and non-doped corundum crystals.

• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.191-196
• /
• 1981

In order to utilize the Koryangju distillers' grain for the acetic acid fermentation, the extracting methods and effects of the extracts on the fermentations were investigated. The result obtained are as follows. 1. Cold extracting method by which the distillers grain is extracted with 3 times of water for 60 hours at room temperature was better than hot extracting method in terms of the fermentation rate and the quality of vinegar product. 2. Optimum conditions and some results of surface fermentation based on the medium added by the extracts are as follows, optimum amount of the extracts to be added to the medium is 20-30% of total media; acetic acid production rate at log phase was 0.16g/100$m\ell$, hr.; recovery was 91.17%; and the time of 40 hours was required for the completion of fermentation. 3. Organoleptic quality of the vinegar which is produced by adding the extracts was superior to two commercial products examined.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.1
• /
• pp.41-47
• /
• 1981

The characteristics of septic tank sludges were investigated and the kinetic coefficients in the aerobic biodegradation were evaluated from bach treatability tests. Using an unbiased statistical method, the estimated values, k (substrate removal rate coefficient) =0. 0175hr-1 at 17\ulcornerC, K. (Michaelis Menten constant) = 248mg/ e, a (cell yield coefficient)=0.625, and Kd (cell decay coefficient:' =0. 00192hr-1 were obtained based on biodegradable COD(mg/ \ulcorner) and volatile suspended solids(mg/\ulcorner). The relationship between COD and BOD, COD (mg/\ulcorner) =2. 1 BOD(mg/\ulcorner) +250, also was established for the septic tank sludges. Dilution was inevitable for the grit removal because of the high viscosity of the sludges. An aerobic activated sludge process rather than anaerobic processes was recommended for the removal of soluble organics after the removal of grit and suspended solids. A multi-stage activated sludge process was adapted for this highly concentrated and not easily-degradable waste. It was estimated that a four-stage activated sludge process would require 40 hours retention time compared to 92 hours for a single-stage process, 52 hours for a double-stage process, and 46 hours for a three stage process in order to achieve an effluent quality of 84mg/ e COD( 40mg/ e BOD) with about 4, OOOmg/ \ulcorner MLSS from an influent quality of I, 500mg/ t COD(714mg/.e BOD), while multi-stages beyond four stage would not save the required retention time significantly.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.2
• /
• pp.192-198
• /
• 2013

The quality characteristics of Korean rice cakes (Karedduk) with a mixture of maltooligosaccharide and OSA (octenyl succinic acid starch) added, after 2 and 24 hr of storage at $5^{\circ}C$, was analyzed. A central composite design was used for arrangement of treatment. The two independent variables selected for retarding retrogradation analysis were amounts of maltooligosaccharide (x) and OSA (y). Maltooligosaccharide was added at 0, 3, 6, 9, and 12% levels, and OSA added at 0, 0.3, 0.6, 0.9, and 1.2% levels, to dry rice flour. The texture properties analysis using a Texture Analyzer revealed that the springiness and cohesiveness (p<0.01), chewiness, gumminess and hardness (p<0.001) were significantly different after 24 hr of storage at $5^{\circ}C$. The effect of retarding retrogradation of Korean rice cakes with added mixtures of maltooligosaccharide and OSA showed an increasing trend as the amount of maltooligosaccharide increased. Overall, the instrumental texture properties were highly correlated with the sensory characteristics. These results suggest that adding a mixture of 6% maltooligosaccharide and 0.6% OSA to Korean rice cakes (Karedduk) is effective for retarding retrogradation.