• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.688-695
• /
• 2011

This study was carried out for some survey about soil compaction in the multi-cropping system of paddy field. Investigated sites were 90 farmer's fields in south-eastern part of Korea. The tillage practices season was different according to cropping system of paddy; in spring for mono rice cultivation and in autumn for the multi-cropping field. The average tillage depth in investigated sites was about 25 cm, however, it is different between the farmer's tillage practices and soil characteristics. It is high correlation to tillage deep and minimum resistance of penetration. The reaching soil deep to maximum resistance of penetration was about 27 cm, and average penetration resistance of the deep is 1.8~2.0 MPa for moderately fine-textured soils and more than 3.0 MPa for moderately coarse-textured soils. The difference of penetration resistance between cultivating and compacted layer was in order to sandy loam > clayey loam > clayey, and the difference was lesser in poorly drained soils than somewhat poorly ones. In the rice mono cropping field, the maximum resistance in no-tillage for 15 years was 1.18~1.25 Mpa at 20~25 cm in soil deep, however, the resistance of field with every year tillage practices was 2.03~2.21 Mpa. In the extremely compacted sandy loam textured soils, the penetration resistance at 30 cm in soil depth was drastically reduced by the subsoil from 5.2 Mpa to 3.2 Mpa, and the watermelon root in plastic film house was deep elongated.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.872-879
• /
• 2010

Layered copper hydroxides [LCHs, $Cu_2(OH)_3{\cdot}NO_3$] has the agricultural potentials as a fungicide because of its high crystallinity, excellent anion exchange capacity, and its regular layered particle size. The study, for the first time, has synthesized LCHs in highly concentrated solution and evaluated its physicochemical properties including the crystallinity and suspension stability. Optimal synthetic condition of LCHs was determined by crystallinity and stability of suspension as follow; 1) concentrations of $Cu(NO_3)_2$ and NaOH solutions were 3.0 M respectively, 2) reaction temperature and solution pH were $25^{\circ}C$ and 6.0, respectively, and 3) aging time after reaction was 2hr. Crystallinity of LCHs enhanced with increase in pH up to 9.0. Whereas, stability of suspension was decrease by increase in crystal size. Especially, increase in reaction temperature decreased stability of suspension. XRD patterns and SEM images exhibited that LCHs had regular layered particle size with 0.2~0.8 ${\mu}m$ and high crystallinity in optimal synthetic condition. The particle size was increased with increase in reaction temperature and pH. These results showed that LCHs synthesized in highly concentrated solution exhibited high stability of suspension as well as high crystallinity suitable to their potential as a fungicide.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.379-394
• /
• 2021

Purpose. In our previous studies, application of trichloroacetic acid (TCA) to gingival fibroblasts or to canine palatal soft tissue was verified to alter the expression of several genes responsible for cell cycle progression. In order to confirm this effect in a system allowing sequential release of TCA and epidermal growth factor (EGF), expression of various cell cycle genes following the application of the agents, using hydrophobically modified glycol chitosan (HGC)-based nano-controlled release system, was explored in this study. Materials and methods. HGC-based nano-controlled release system was developed followed by loading TCA and EGF. The groups were defined as the control (CON); TCA-loaded nano-controlled release system (EXP1); TCA- and EGF- individually loaded nano-controlled release system (EXP2). At 24- and 48 hr culture, expression of 37 cell cycle genes was analyzed in human gingival fibroblasts. Correlations and the influential genes were also analyzed. Results. Numerous genes such as cyclins (CCNDs), cell division cycles (CDCs), cyclin-dependent kinases (CDKs), E2F transcription factors (E2Fs), extracellular signal-regulated kinases (ERKs) and other cell cycle genes were significantly up-regulated in EXP1 and EXP2. Also, cell cycle arrest genes of E2F4, E2F5, and GADD45G were up-regulated but another cell cycle arrest gene SMAD4 was down-regulated. From the multiple regression analysis, CCNA2, CDK4, and ANAPC4 were determined as the most influential factors on the expression of ERK genes. Conclusion. Application of TCA and EGF, using the HGC-based nano-controlled sequential release system significantly up-regulated various cell cycle progression genes, leading to the possibility of regenerating oral soft tissue via application of the proposed system.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.143-158
• /
• 2021

The purpose of this study is to suggest a direction for enhancing the mutual trust level between employees and managers by examining the effect of job satisfaction of electric power companies's employees and performance-oriented remuneration paid to them on awareness level of organizational justice and a trust in manager. Based on a significant positive relationship between employee's job satisfaction and trust in a manager, a significant positive relationship between employee's job satisfaction and perception of organizational justice, and a positive relationship between organizational justice and trust in manager, it was possible to confirm the mediating role of organizational justice between job satisfaction and a trust in manager. In addition, although performance-oriented remuneration did not have a significant effect on trust in manager directly, it was found to have a significant negative effect on distributive justice and procedural justice, but for interactional justice did not appear to have a significant influence. Because the autonomy of the labor budget is quite limited due to the government's total regulation on the size of the labor budget for public enterprises and due to the government's evaluation of management of public enterprises, it can be explained as having a negative effect on the perception of organizational justice. In addition, since the partial mediating effect of distributive justice and interactional justice was confirmed in the relationship between job satisfaction and trust in manager, the mediating effect of procedural justice was insignificant, it was confirmed that the need to establish and operate an internal HR management system based on smooth communication that employees can satisfy and accept can have a significant impact on trust in manager. On the other hand, because the negative complete mediating effect of distributive justice and procedural justice between performance-oriented remuneration and trust in manager was significantly confirmed, It is showing that employees' negative perceptions of performance distribution procedures and distribution results had a negative effect on trust in manager. The results of this study suggest that employees will perceive the organization as fair, and trust the manager who is the decision maker, when they are fully rewarded for their performance, with job satisfaction, a fair evaluation of their efforts, even if there are various factors that can influence managers to be trusted by their employees.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.388-397
• /
• 2011

The purpose of this study was to determine the optimum ethanol extraction conditions for maximum extraction of functional components such as ferulic acid, oryzanol, and toopherol from black rice bran using Response Surface Methodology (RSM). A central composite design was applied to investigate the effects of the independent variables of solvent ratio ($X_{1}$), extraction temperature ($X_{2}$) and extraction time ($X_{3}$) on the dependent variables such as total phenol components ($Y_{1}$), total flavonoids compounds ($Y_{2}$), electron donating ability ($Y_{3}$), $\gamma$-oryzanol ($Y_{4}$), ferulic acid ($Y_{5}$) and $\alpha$-toopherol components ($Y_{6}$). ANOVA results showed that coefficients of determination (R-square) of estimated models for dependent variables ranged from 0.8939 to 0.9470. It was found that solvent ratio and extraction temperature were the main effective factors in this extraction proess. Particularly, the extraction efficiency of ferulic acid, $\gamma$-oryzanol and $\alpha$-toopherol components were significantly affected by extraction temperature. As a result, optimum extraction conditions were 20.35 mL/g of solvent ratio, 79.4$^{\circ}C$ of extraction temperature and 2.88 hr of extraction time. Predicted values at the optimized conditions were acceptable when compared with experimental values.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.503-506
• /
• 2008

'Saenuri' is a new japonica rice variety developed and registered by the rice breeding team of Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. This variety was derived from a cross between Gyehwa17 with lodging tolerance and high yield potential, and HR14026-B-68-6-1-5 with resistance to diseases and good eating quality. This variety has about 124 days growth duration from transplanting to harvesting in west-southern coast, Honam and Youngnam plain of Korea. It is about 78 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows moderately resistance to blast, and resistance to bacterial blight pathogen races from K1 to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled rice of "Saenuri" exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has similar amylose content of 19.0% and lower protein content of 6.1%, and good palatability of cooked rice compared with Nampyeongbyeo. The milled rice yield performance of this variety is about 5.71MT/ha in local adaptability test for three years. "Saenuri" would be adaptable to west-southern coast, Honam and Youngnam plain of Korea.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.404-412
• /
• 2011

The purpose of this study is to prepare extruded rice flours suitable for baking rice cookies. The extruded rice flours were prepared at 100 and 130$^{\circ}C$ temperature and 25 and 27% moisture content in a co-rotating twin screw extruder. The rice extrudates were dried at 100$^{\circ}C$ for 18 hr and subsequently ground into the fine flour. Characteristics of the extruded rice flours were examined by rapid visco analysis, hydration property analysis, differential scanning calorimetry (DSC), and in vitro digestion test. Water absorption, solubility, and swelling power of all extruded rice flours were higher than those of native rice flour. DSC analysis showed that native rice flour had a peak at about 65$^{\circ}C$ while all extruded rice flours did not show any peaks since they were already gelatinized during the extrusion proess. Viscosity of the extruded rice flours decreased with increasing temperature and lowering moisture content in the extrusion proess. The extruded rice flours prepared at 130$^{\circ}C$ exhibited lower viscosity than those prepared at 100$^{\circ}C$. The operating temperature of the extrusion proess was critical for the starch digestion in vitro. The extruded rice flours prepared at 130$^{\circ}C$ showed a rapid decrease in digestible starch content while an increased level of slowly digestible starch content was observed compared to those treated at 100$^{\circ}C$ in the extruder. Cookies were prepared with a mixture of wheat flour and extruded rice flours at the ratio of 7 to 3. The cookies made with the extruded rice flours had lower spread factor and darker yellow color than those prepared with wheat flour only. Hardness of the extruded rice flour-added cookies was similar to that of the wheat flour cookie whereas their overall acceptance was better. Therefore the rice cookies partially supplemented with extruded rice flours may have a potential as early childhood foods which require soft texture and allergy reduction.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.188-191
• /
• 2008

'Hwangkeumnuri' is a japonica rice variety developed and registered by the rice breeding team of Honam Agricultural Research Institute, NICS, RDA in 2006. This variety was derived from a cross between 'Milyang 165' (Junambyeo) with good quality and high yield and HR14732-B-67-2-3 with multi-disease resistance. This variety has about 125 days growth duration from transplanting to harvesting in west-southern coast, Honam and Youngnam plain of Korea. It is about 76 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows resistance to blast, bacterial blight pathogen from $K_1$ to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled rice of 'Hwangkeumnuri' exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has similar amylose content of 18.9% and lower protein content of 6.2%, and good palatability of cooked rice compared with 'Nampyeongbyeo'. The milled rice yield performance of this variety is about 5.74 MT/ha in local adaptability test for three years. 'Hwangkeumnuri' would be adaptable to west-southern coast, Honam and Yeongnam plain of Korea.

• Journal of Nutrition and Health
• /
• v.52 no.2
• /
• pp.227-241
• /
• 2019

Purpose: This study examined the relationship between caffeine intake and metabolic syndrome in Korean adults using the 2013 ~ 2016 Korea National Health and Nutrition Examination Survey data (KNHANES). Methods: The caffeine database (DB) developed by Food and Drug Safety Assessment Agency in 2014 was used to estimate the caffeine consumption. The food and beverage consumption of the 24 hr recall data of 2013 ~ 2016 KNHANES were matched to items in the caffeine DB and the daily caffeine intakes of the individuals were calculated. The sample was limited to non-pregnant healthy adults aged 19 years and older, who were not taking any medication for disease treatment. Results: The average daily caffeine intake was 41.97 mg, and the daily intake of caffeine of 97% of the participants was from coffee, teas, soft drinks, and other beverages. Multivariate analysis showed that the caffeine intake did not affect metabolic syndrome, hypertension, low HDL-cholesterol, and abdominal obesity. Diabetes and hypertriglyceridemia, however, were 0.76 (95% CI: 0.63 ~ 0.93), and 0.87 (95% CI: 0.77 ~ 0.98) in third quintile (Q3), and 0.66 (95% CI: 0.53 ~ 0.82) and 0.83 (95% CI: 0.73 ~ 0.94) in fourth quintile (Q4) compared to Q1, respectively. Therefore, caffeine intake of 3.66 ~ 45.81 mg per day is related to a lower risk of diabetes and hypertriglyceridemia. Conclusion: The study showed that adequate caffeine intake (approximately 45 mg) was associated with a lower prevalence of diabetes and hypertriglyceridemia. Therefore, it can be used as a guideline for the adequate level of caffeine intake for maintaining health.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.466-473
• /
• 2018

An analytical method of sodium polyacrylate in processed food products was developed and monitored by using size-exclusion chromatography. GF-7M HQ column and UV/VIS detector were selected based on peak shape and linearity. Flow rate, column oven temperature, and mobile phase were selected as 0.6 mL/min, $45^{\circ}C$, and 50 mM sodium phosphate buffer of pH 9.0, respectively. Samples for analysis of sodium polyacrylate were extracted with 50 mM sodium phosphate buffer of pH 7.0 for 3 hr at $20^{\circ}C$ and 150 rpm. Analytical method validation revealed proper selectivity and calibration curve was selected in the range of 50-500 mg/L, and correlation coefficient of calibration curve was more than 0.9985. Limit of detection of sodium polyacrylate was 10.95 mg/kg and limit of quantification was 33.19 mg/kg. Accuracy and coefficient of variation for sodium polyacrylate analysis was 99.6-127.6%, 3.0-8.3% for intra-day and 94.3-121.9%, 1.3-2.6% for inter-day, respectively. Sodium polyacrylate was detected in 40 samples among monitored 125 processed food products. Detected contents were less than 0.2%, limited by the Food Additives Code. Results suggest the established size-exclusion chromatography method could be used to analyze sodium polyacrylate in processed food products.