• Journal of agricultural medicine and community health
• /
• v.24 no.2
• /
• pp.301-314
• /
• 1999

To evaluate the ischemic heart disease risk factors and analysis on the its relationship between risk factors and ischemic heart disease on EKG findings in a rural area, We conducted cross-sectional health screening test for 1304 persons aged over 30 years. Blood pressure, total cholesterol, HDL cholesterol, fasting blood glucose, BMI and Waist/hip ratio, smoking data and EKG data were collected. Hypertension was classified by the sixth report of the Joint National Committee on Detection, Evaluation, and Treatment of High Blood Pressure and the cutpoints of hyperlipidemia was used National Cholesterol Education Program. The cutpoint of hyperglycemia was used National Diabetes Data Group and those for obese was 30%. The results obtained were as follows; 1. Prevalence of definitive hypertension was 41.2% in males and 41.6% in females. The prevalence of hypertension showed Increasing tendency according to age increase(p<0.05). 2. Prevalence of hyperlipidemia was 20.6% in males and 20.4% in female. In females prevalence of hyperlipidemia showed increasing tendency according to age increase(p<0.001). 3. Prevalence of obese was 23.4% in males and 28.8% in females. Upper body type was predominant in females, but lower body type was predominant in males. 4. Prevalence of hyperglycemia was 11.0% in males and 12.1% in females. The prevalence of hyperglycemia showed increasing tendency according to age increase(p<0.01). 5. The smoking rate was 63.7% in males and 2.6% in females. 6. On the EKG findings, the prevalence of myocardial ischemia and myocardial infarction was 6.7% in males and 7.5% in females. 7. The prevalence of Ischemic heart disease was higher in hypertension than normal in females and higher in obese than normal in males. In males and females the prevalence of ischemic heart disease was higher in hyperglycemia than normal and higher in upper body type than lower body type. But there is no statistical association among them.

• The Journal of Internal Korean Medicine
• /
• v.28 no.1
• /
• pp.34-46
• /
• 2007

Objectives: This study was to assess characteristics in acute stroke patients according to Sasangconstitution (SC). Methods : We assessed the type of SC of acute stroke patients in $2^{nd}$ Department of Internal Medicine at KyungHee University Oriental Hospital from October 2005 to September 2006. Each subject's SC type was confirmed when the result of QSCC II+ was in accordance with the opinion of the Sasangconstitutional medicine specialist. We investigated general characteristics, stroke type, blood test results, alcohol drinking, smoking and dietary preferences according to SC. Results: 108 subjects were included in the final analysis. This study showed that out of the total patients, the proportion of So-yang to Tae-eum to So-eum was equal to 5.5 to 3.5 to 1. Especially, men were higher proportion So-yang while women recorded a more significant ratio of Tae-eum. Also, the BMI, waist circumference, hip circumference, and WC/HC ratio recorded significantly high results. The result indicated that even though the Tae-eum let on the highest numerical value in the aspect of their past history and the final diagnosis, no significant difference was revealed according to SC. The ratio of cerebral infarction to cerebral hemorrhage was 9 to 1. SVO, LAA, SUE are the 3 types of cerebral infarction classified by TOAST; SVO ranked the highest while SUE ranked the lowest in all constitutions. The blood test result displayed that averages of both TL and the T-chol were the highest in Tae-eum while that of hematocrit in So-yangand that of HDL-chol in So-eum. However, there was no significant difference. There were no significant differences classified by gender or by SC in the aspect of the alcohol drinking and smoking history. The majority of So-yang and Tae-eum demonstrated a preference for meat while So-eum and So-yang displayed high preferences for sea food. Conclusions : With respect to these results. we could observe the general disposition of various characteristic distributions according to SC of acute stroke patients. For further research in this field. it seems necessary to construct fundamental databases for the prevention and treatment of stroke by increasing the number of patients observed and by analyzing delicate characteristics of each constitution type.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.3-9
• /
• 2011

Purpose: Generally dual energy X-ray absorptiometry has been used for the purpose of evaluation of osteoporosis and treatment. Recently the interest of obesity came to be high and body percent fat test is increasing. Existing measure of body fat have to scan the whole body can be evaluated, but only lumbar spine and hip measurements was assumed to be whole body fat as well as improving the software. It tries to check whether the part measured value not being whole body measurement has the validity or not compared with the value calculated with the method that it is different, it forgives through a correlation with a (BIA) and (BMI). Materials and Methods: In 2010, the body percent fat was measured among the examinee coming to the Asan Medical Center public health care center from March till August against 90 females more than 40 years old through (DXA) and BIA. BMI utilized the value which wrote an hight and weight measured through the body measuring instrument in the examinee information and is automatically calculated. In addition, it classified as the low weight ($13-18.5kg/m^2$), normal ($18.5-25kg/m^2$), and corpulence ($25-30kg/m^2$) based on BMI and so that it could check whether there was the difference according to the weight or not BMI and BIA and correlation between DXA were analyzed in each group. The statistical program for the analysis used SPSS 12.0. Results: The comparison of DXA at 3 which it divides into the low weight and normal and corpulence groups and BIA did not show the difference noted statistically in all groups and the between group comparison was exposed to do not have a meaning. The body percent fat measured by the correlation analysis result DXA at the state that it doesn't divide into the group showed the high correlation (r=0.908, p0.01) noted statistically compared with BMI and showed the high correlation noted statistically in a comparison with BIA (r=0.927, p0.01). Conclusion: It confirmed that the whole body percent fat presumed from the part bone density measurement showed the excel correlation compared with BIA and BMI and information is high. There is still no clear standard about the presumed whole body percent fat and it is difficult to evaluate the fat evaluation by the bone mineral density measurement. However, it is determined that the information offering which is more objective through the comparative study with the body percent fat which is very efficient and in that it can obtain till the information about a fat as well as diagnosis of the osteoporosis through the bone density checkup is measured by the afterward telegraph bone density checkup and is clinically useful is possible.

• Research in Community and Public Health Nursing
• /
• v.15 no.4
• /
• pp.587-599
• /
• 2004

Purpose: The purpose of this study is to compare abdomen-fat rate, life style and social-support between normal weight women and obese women. Method: 304 women objectives from their 30 to 59 years of age were selected living in Je-chon city, Chung-Buck province and their height and weight were measured from April 1st to June 30th, 2003. Data were classified into low-weight group ($18.5kg/m^2$), normal-weight group ($18.5{\sim}22.9kg/m^2$), over weight group ($23{\sim}24.9kg/m^2$), and obese group ($25kg/m^2$) following the Korean Conference of Obesity, 2001. in which 119 people in the normal weight group and 91 people in the obese group, i.e. total 210 people were analyzed in sequence. Using SPSS Win 10.1 Program, frequency and percentile, and by ANOVA, $X^2-test$ and t-test were treated. Results: The average age of obese women was 46.68 distributing 40.7% of forties and 39.6% of fifties while normal-weight women were average 41.73-year old distributing 53.8% of forties and 34.5% of thirties, which revealed aged in obese women. The body fat rate of obese women averaged $37.52{\pm}4.17%$, in which 98.9% of obese women and 21.0% of normal weight women with a more than 30% of body-fat rate resulted in a higher body-fat rate in obese women. The waists of obese women averaged $88.37{\pm}8.22cm$, in which more than 85cm showed in obese women of 68.2% and normal weight women of 7.6% indicating a higher waist-fat rate in obese women. The abdomen-fat rate of more than 0.85 of waist vs hip-fat showed 74.7% in obese women and 58.4% in normal weight women, indicating a higher abdomen-fat rate in obese women. Obese women and normal weight women showed significant differences in education level, number of children, religion, menstrual status, and mother's weight. Especially, obese women ate hotter or saltier food than normal weight women preferring meat. However, no significant differences appeared in marital status, social economic status. occupation. eating habits. smoking. drinking and physical exercise. Social support levels showed a lower rate in obese women than in normal weight women, indicating a statistically significant difference (p<.05). Observing areas of social support, obese women showed lower rates in attachment/intimacy, social integrity, opportunity of foster and confidence in value except help and instruction, which indicated a statistically significant difference (p<.05). Social support for obese women showed significant differences in age, education level, social hierarchy, religion and menstrual status. Obese women were more negative than normal weight women in health recognition, indicating a statistically significant difference (p<.01). Normal weight women showed higher health recognition when provided high social support and significantly low (p<.01) health recognition when provided low social support. However, there was no significant difference in health recognition in obese women whether high or low social support was given. The health recognition of obese women showed significant differences in age, education level, social hierarchy, number of children, menstrual status, physical exercise, eating habits, eating taste and preference of food. Conclusion: Obese women showed elder than normal-weight women, higher body-fat rate and abdomen-fat rate, lower social support, and a tendency to more negative health recognition. Therefore, providing weight-control programs for the treatment of obesity and prevention of recurrence for obese women to prevent progressing to adult disease and promote a healthy life, we suggest that better eating habits and the encouragement of regular physical exercise should be included, as well as total approachment on change of health recognition and social support would be needed.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.42-50
• /
• 2021

Purpose: Periprosthetic fractures of a tumor prosthesis are rare but have difficulties in achieving sound fixation because of the poor bone quality, which increases the risk of loosening or re-fracture, even after bone union. A cortical strut onlay allograft was adopted for peri-prosthetic fractures after hip arthroplasty into the periprosthetic fracture of a tumor prosthesis, assuming that it would assist in firm fixation, shorten the time to union, and increase the bone stock, thereby, lower the chance of loosening and re-fracture. Materials and Methods: This study reviewed 27 patients (30 cases) of periprosthetic fracture of tumor prosthesis. Sixteen cases (allograft group) had augmentation with an onlay allograft, while 14 cases (conventional group) had internal fixation or conservative treatment. The following were assessed; mode of periprosthetic fracture, difference in the time to union between a strut cortical onlay allograft and without it, and survival of prosthesis, complication, and functional outcome between the two groups. Results: According to the unified classification system (UCS), 21 cases were type B (70.0%; B1, 14; B2, 1; B3, 6) and 9 cases were type C. The five-, 10-year survival of the 30 reconstructions by Kaplan-Meier plot was 84.5%±4.18% and 42.2%±7.83%, respectively. The average time to bone union of the entire cohort was 5.1 months (range, 2.0-11.2 months). The allograft group (3.5 months) showed a shorter period for union than the conventional group (7.2 months) (p<0.0001). All four cases of major complications occurred in the conventional group. Two cases with loosening and anterior angulation were treated with a change of prosthesis, and another with infection underwent amputation. The remaining case with loosening had conservative management. At the final follow-up, the average Musculosketal Tumor Society score of the allograft group (26.1) was better than that of the conventional group (20.9). Conclusion: Bone union in periprosthetic fractures of a tumor prosthesis can be achieved, but the minimization of complications is important. An onlay allograft facilitates firm fixation and increases the bone stock with a shortened time to union. This simple method can minimize the risk of loosening, joint contracture, and re-fracture.