• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• 패션비즈니스
• /
• 제26권5호
• /
• pp.91-104
• /
• 2022

In this study, a cycling smart wear for measuring cycling posture and motion was developed using a three-dimensional motion analysis camera and an IMU inertial sensor. Results were compared according to parts to derive the optimal smart device attachment location, enabling correct posture measurement and cycle motion analysis to design a pattern. Conclusions were as follows: 1) 'S-T8' > 'S-T10' > 'S-L4' was the most significant area for each lumbar spine using a 3D motion analysis system with representative posture change (90°, 60°, 30°) to derive incisions and size specifications; 2) the part with the smallest relative angle change among significant section reference points during pattern design was applied as a reference point for attaching a cycling smart device to secure detachable safety of the device. Optimal locations for attaching the cycling device were the "S-L4" hip bone (Sacrum) and lumbar spine No. 4 (Lumbar 4^th); 3) the most suitable sensor attachment location for monitoring knee induction-abduction was the anatomical location of the rectus femoris; 4) a cycling smart wear pattern was developed without incision in the part where the sensor and electrode passed. The wearing was confirmed with 3D CLO. This study aims to provide basic research on exercise analysis smart wear, to expand the smart cycling area that could only be realized with smart devices and smart watches attached to current cycles, and to provide an opportunity to commercialize it as cycling smart wear.

• Investigative Magnetic Resonance Imaging
• /
• 제26권2호
• /
• pp.117-124
• /
• 2022

Purpose: In this study, we provide a way to assess even a slight effect of exercise on trunk-muscle activity. Materials and Methods: Seven healthy male participants (mean age, 24.7 ± 3.2 years; height, 171.2 ± 9.8 cm; and weight, 63.8 ± 11.9 kg) performed 15 sets of an exercise with 20 repetitions of 90° hip and right-knee flexion while lying supine. The exercise intensity was measured using the 10-point Rating of Perceived Exertion Scale after the first and 15th sets of exercises. Although cross-sectional areas and functional T2 mapping using ultrafast imaging (fast-acquired muscle functional magnetic resonance imaging, fast-mfMRI) have been proposed for imaging to evaluate exercise-induced muscle activity in real time, no previous studies have reported on the evaluation of trunk-muscle activity using functional T2 mapping. As a method for assessing trunk-muscle activity, we compared functional T2 mapping using ultrafast imaging (fast-mfMRI) with cross-sectional areas. Results: Although the muscle cross-sectional areas were increased by the exercise, there was no significant difference at rest. On the other hand, for all sets, the changes in T2 were significant compared with those at rest (P < 0.01). These results demonstrate that T2, calculated from fast-mfMRI images can be used to detect even a small amount of muscle activity induced by acute exercise, which was impossible to do with cross-sectional areas. Conclusion: Fast-mfMRI, which can also display functional information with detailed forms, enabled non-invasive real-time imaging for identifying and evaluating the degree of deep trunk-muscle activity induced by exercise.

• Journal of Veterinary Science
• /
• 제21권5호
• /
• pp.53.1-53.12
• /
• 2020

Background: The TightRope System is a device developed to provide extracapsular stabilization of the cranial cruciate ligament (CCL) rupture in canine stifles. I was then also employed for the extra-articular treatment of shoulder instability and for the intra-articular treatment of hip luxation in dogs and cats. Objectives: To evaluate the feasibility of the Mini-TightRope (mTR) System for the intraarticular treatment of CCL rupture in small breed dogs. Methods: A cadaveric canine model was used to record the steps of the surgical procedure. Five client owned dogs weighing from 8 to 10 kg and from 2 to 12 years of age were enrolled in the prospective study in which the mTR device was implanted in the stifle joint to replace the ruptured CCL. The dogs were graded using the Bologna Healing Stifle Injury Index (BHSII) and radiographic osteoarthritis (OA) scores. Results: The outcomes obtained at the time of the surgery (T0) and for the following 12 months (T12) showed an improvement in the functional parameters (BHSII from a median of 74.3 [range, 58.1-82.4] at T0 to 95.6 [range, 94.1-99.3] at T12]). The OA did not change in 3 dogs and increased by only 1 point in 2 dogs. Conclusions: In this preliminary study, the mTR was a successful and repeatable intraarticular surgical procedure for all dogs. Additional studies related to the clinical application of the technique in medium-large dogs should be encouraged.

• 패션비즈니스
• /
• 제26권3호
• /
• pp.116-137
• /
• 2022

The purpose of this study was to develop jacket patterns that could fit well for women in their 20s with turtle neck syndrome body shape and to present a pattern drafting method. As a research method, an educational pattern was chosen through a preliminary experiment. Fit problems of the educational pattern were derived by wearing it on a virtual model with a turtle neck syndrome body type for each neck angle. Based on the three types of experimental patterns developed by supplementing these problems, a development pattern drafting method was developed for each neck angle. Three development patterns were compared and evaluated with the educational pattern using 3D virtual fitting. Fit problems of the educational pattern included: 1) insufficient ease amounts for hip, hem, bicep, elbow, and sleeve hem circumference; 2) horizontal items could not be leveled due to insufficient back length; 3) the shoulder line went backwards; and 4) the front center line did not form a vertical line. To solve these problems, an experimental pattern was developed by increasing the insufficient ease amount, increasing the insufficient back length, and correcting the position of the shoulder line. Measurements that differed in the pattern drafting method of the three types of development patterns by neck angle were positions of back center line and back neck point, front length, and front neck width. Through appearance evaluation of the development pattern and educational pattern by neck angle, the development pattern was highly evaluated, indicating that problems of the educational pattern were improved.

• 패션비즈니스
• /
• 제14권1호
• /
• pp.11-26
• /
• 2010

This study was carried out using personal measurement for female college students who have a great interest in fashion at 20-24 age, and examined somatotype character. As a means of a character type test, the grades were laid by using MBTI which proved to be objective, and relativity between character types was laid by conducting correlation analysis. The conclusions which can be drawn from this study are as followed. 1. In 4 preference index, which was classified by MBTI, Sensing(S) type was the highest of 17.27% at the average and 68.5% at the distribution rate each. The average of Extraversion(E) type was 14.56% and it's distribution rate was 64.5%. Index of types were : Intuition(N) 12.49%, Introversion(I) 11.75%, Perceiving(P) 12.50%. Average distribution rate of each types were : N 31.5%, I 35.5%, P 40.3%. And average of Sensing(S) type was the lowest, 11.09%. Like American Students, the subjects of this study showed higher in the E type than in the I type. The distribution rate of 16 character types of MBTI were : ESTJ 18.5%, ESFP 13.7%, ISTJ and ESFJ 9.7%. But INTP and INFP were low, 2.4% and 0.8%. 2. Average sizes of subjects for this study were : height 160.49cm, weight 51.83kg, bust 83.22cm, waist 65.49cm, hips 90.70cm. As compared with measurement of women at 20-24 age of Size Korea(2004), the subjects of this study showed less, about 0.2-5cm in height, 0.2-2cm in circumference except in waist, and 0.5-3.6cm in length. 3. After examining the relativity between personal measurement categories of the subjects and character type through the MBTI, Extraversion(E) type showed inverse correlation in stature, height, biacromial breadth, and subcutaneous fat thickness of posterior iliospinale. Contrary to the E type, the Introversion(I) type showed positive correlation. Sensing(S) type showed inverse correlation only in biacromial breadth, Intuition(N) type showed positive correlation in most categories including height, width and the subcutaneous fat thickness. Thinking(T) type showed positive correlation in bust point-bust point, chest depth and hip width. Feeling(F) type, on the other hand, showed inverse correlation. The Judging(J) type showed inverse correlation in stature, height, length and the parts of chest. In contrast, Perceiving(P) type showed positive correlation in other categories including biacromial breadth, same as the J type.

• 한국운동역학회지
• /
• 제18권2호
• /
• pp.95-104
• /
• 2008

본 연구는 남자 중학교 초보피험자들을 대상으로 태권도 돌려차기 동작의 숙련정도에 따른 운동학적 협응과 제어과정을 살펴보는 데 목적을 두었다. 이용된 변인은 최대합성직선속도와 각도 대 각도 도면이었다. 분석결과, 연습후기로 갈수록 인접한 분절간의 운동량 전이가 잘 이루어져 각 분절의 최대합성직선속도가 증가하였으며 무릎관절 최대굴곡 시까지는 엉덩관절과 무릎관절이 동형동조 협응형태로 변해갔으며, 최대굴곡 후 타격 시까지는 모든 숙련 단계에 있어서 이형동조 협응패턴을 나타내었다. 발목관절은 무릎관절 최대굴곡 시까지 배측굴곡 상태에서 저측굴곡으로 변했으며, 최대굴곡 후 타격시점까지는 발목관절은 고정시키고, 무릎관절은 신전시키는 자유도 고정 제어기전을 나타내었다.

• 디자인학연구
• /
• 제11권2호
• /
• pp.215-226
• /
• 1998

80년대 중반까지만 해도 신형 차라고 하면 정형화된 팩키징 레이아웃을 전제로 하여 구형보다는 큰 바디이거나 거의 비슷한 레이아웃으로 형태를 조금씩 바꾸어 스타일 이미지 변형을 시도하는 방법이 주류를 이루었다. 이후 연비절감과 승차 감 향상을 위한 공역학적 바디 스타일 경쟁 시기에서도 정형화된 팩키징 레이아웃은 크게 변하지 않고 엔지니어링 부분의 고출력, 고 효율화를 통하여 상품성을 향상시키고자 하였다. 이제는 일상생활 전체에 대한 모터라이제이션의 급격한 진행과 함께 자동차 산업의 발달로 공급과잉 및 기술의 평준화가 이루어져 가고 있다. 이러한 기술 평준화 현상은 자동차 디자인에서의 혁신의 개념이 과거와는 다른 양상으로 발전되어 어떤 의미로는 진정한 의미의 자동차 디자인을 요구하는 시대에 이르렀다. 자동차 디자인에서는 외형보다는 실내의 디자인 계획이 훨씬 중요하다. 자동차 승 원의 거주 이동 목적에 맞는 컴포터빌러티 향상 노력이 자동차 디자인의 본질이기 때문이다. 본 연구는 외형 결정의 선행요소인 자동차 실내의 디자인 계획방법을 연구하여 보고 디자인 혁신을 통하여 소비자들에게 좋은 평가를 얻은 차종의 실내디자인 계획에 대한 분석적 접근을 통한 데이터 추출, 자료화로 미래지향적, 본질적 의미이 자동차 디자인 활동의 참고자료로 활용하고자 한다.

• Journal of Animal Science and Technology
• /
• 제50권5호
• /
• pp.601-612
• /
• 2008

본 연구는 한우의 체형과 체중이 일령에 따라 어떻게 변화하며, 선발형질인 도체형질과의 상관 또한 체중 및 체형의 변화에 따라 어떠한 형태로 변화하는지 알아보기 위하여 실시하였다. 분석에 이용한 형질은 체중, 체형 및 도체형질을 포함하여 모두 17가지 형질이며 거세우 161두의 자료를 이용하였다. 성장곡선 추정은 logistic 모형을 이용하였고, 추정한 모수를 토대로 변곡일령 및 변곡일령에서의 특성을 다시 계산하였다. 각 형질에 대한 성장곡선 모수를 분석한 결과 좌골폭은 조숙성, 흉위는 만숙성 형질인 것으로 나타났다. 등지방두께에 대한 흉심, 흉폭 및 요각폭의 순위상관계수는 6~24개월까지 꾸준히 증가하는 반면 다른 체형형질들은 18개월령 이후에 감소하는 것으로 나타났다. 본 연구는 표현형 자료에 대한 분석만이 이뤄졌으나, 한우 성장 단계에 따른 유전적 변화를 살펴보기 위해 유전모수 추정과 같은 추가적인 연구가 이뤄진다면 체형형질을 한우개량에 충분히 이용이 가능할 것으로 생각된다.

• 복식
• /
• 제2권
• /
• pp.9-21
• /
• 1978

The object of this article is to examine the shapes and the development of the costume worn in the early and middle Yi Dynasty from the viewpoint of the history of customes with the excavated clothing from Chung-Ju (1530 A.D.), Wool-San (1650 A.D.), An-Dong (1650 A.D.) etc. The study of the history of costumes of the early years of the Yi Dynasty has been mainly dependent upon fiblirographical records sofar. So I have arranged in order some excavated clothing of the early Yi Dynasty, which gives us some means for the study of Korean historical costumes. It is noticeably remarkable that the daily wear of the early Yi Dynasty period was excavated for the first time from Chung-ju. The results drawn from this research are: It is argued that the original from of Chul-nik(天翼) has been excavated. This is the remnants Mongolian clothing of the Koryo Dynasty, and it is sketched in the Dai-Myong-jib-lei(大明集禮) as Yo-sun-o-ja which the lower classes usually put on. The similar clothing is also handed down as a Dan-po(緞袍) from the ming Dynasty, and we can presume that Chul-nik was a common clothing regardless of the social status of their wearer. It is also remarkable that even women at those times wore the Chul-nik. The length of the Cheo-go-ri of the early Yi Dynasty was the middle hip length, and the edge of the sleeves was very wide which called Cham-soo, and it was handed down to the middle period of the Yi Dynasty which can be seen in the coat (po) of women(直領袍). The systems of the straight-collar Po(袍) during the early Yi Dynasty were discovered for the first time. This Po(袍) which would represent the po-system of the early years of Yi Dynasty, is handed down even to the middle of Yi Dynasty. The collars of the Po(coat) of the early Yi Dynasty are mostly double collars(二重衿) and these give us the advantage in reconsidering of the cheo-go-ri(赤古里) of the Kingdom of Shin-la, or Koryo Dynasty. The edge of the women's Ba-ji(袴) of the early Yi Dynasty was wide and the Ba-ji had a shoulder belt which connect the front part with the back one, which showed the practical point of Ba-ji. The men's Ba-ji of the middle Yi Dynasty was the same as can be seen today and it is clear that the Mongolian Ba-ji dated to B.C. 1 was the same one also. In the system of the Chi-ma(常), there seems to be no differences between the ancient styles and those of these times.