• PNF and Movement
• /
• v.20 no.3
• /
• pp.341-349
• /
• 2022

Purpose: The purpose of this study is to compare the muscle activity of the hip abductors and the ratio between the hip abductor muscle group according to the range of hip abduction during the clam exercise. Methods: This study was conducted on 18 healthy men in their aged 20 to 29 who had not been diagnosed with spine-related diseases. The subjects performed a clam exercise without rotation of the pelvis in a state of 60° hip flexion and 90° knee joint flexion in the side-lying position. Using Myomotion equipment and EMG, the muscle activity of the hip abductor muscles and the activity ratio between the hip abductor muscle group were measured during the clam exercise by dividing the range into initial, mid-range, and terminal sections. Repeated measures analysis of variants was employed to compare the activity and use of hip abductor muscles according to range of motion during the clam exercise. Results: Gluteus medius muscle activation was significantly increased in the comparison of muscle activity in the initial, mid-range, and terminal sections of hip abduction. Tensor fasciae latae muscle activation was significantly increased in the comparison of muscle activity in all range of motion sections as well. The gluteus medius-tensor fasciae latae muscle activation ratio was significantly increased in the terminal section compared to the initial section. Conclusion: The gluteus medius and tensor fasciae latae had higher muscle activities as they approached the terminal section during the clam exercise, and the hip abduction activity ratio of the gluteus medius and tensor fasciae latae was higher as the range of motion approached the terminal section.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.305-314
• /
• 2012

The purpose of this study was to investigate the effects of joint kinetics and coordination on within-individual differences in maximum vertical jump. 10 male subjects aged 20 to 30 performed six trials in maximum vertical jump and with based on jump height the good(GP) and bad(BP) performances for each subject were compared on joint kinetics of lower extremity and coordination parameters such as joint reverse and relative phase. The results showed that maximum moment, power, and work done of hip joint and maximum moment of ankle joint in GP were significantly higher than that in the BP but no significant differences for the knee joint. We could observe a significant difference in joint reverse timing between both conditions. And also the relative phase on ankle-knee and ankle-hip in GP were significantly lower than that in the BP, which means that in GP joint movements were more in-phase synchronized mode. In conclusion, mechanical outputs of hip and ankle joints had an effect on within-individual differences in vertical jump and the inter-joint coordination and coordination including sequence and timing of joint motion also might be high influential factors on the performances within individual.

• The Journal of Korean Physical Therapy
• /
• v.11 no.2
• /
• pp.93-102
• /
• 1999

Alignment of the hip joint and pelvis affects it's weight-bearing capabilities as well as the motion available at the joints. The normal hip joint is well designed to withstand the forces that act through and around it, assisted by the trabecular systems, cartilagious, muscles, and ligaments. Alterations in the direction or magnitude of forces action around the injury and degenerative changes. The integration of motion of the pelvis with motion of the vertebral column not only increases the ROM available to the total column but also reduces the amount of flexibility required of the lumbar lesion. In any instance in which there is normal or abnormal pelvic motion during weight hearing and the head must remain upright, compensatory motions of the lumber spine will occur if available. The motions that occur at the hip, pelvis, and lumbar spine during forward trunk bending with the motions that occur during anterior and posterior tilting of the pelvis in the erect standing postion.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.269-279
• /
• 2000

This paper deals with the development of biomechanical model on a seat with backrest support in the vertical direction. Four kinds of biomechanical models are discussed to depict human motion. One DOF model mainly describes z-axis motion of hip, two and three DOF models describe z-axis of hip and head, and while nine DOF model suggested in this study represents more motion than the otehr model. Three kinds of experiments were executed to validate these models. The first one was to measure the acceleration of the floor and hip surface in z-axis, the back surface in x-axis, and the head in z-axis under exciter. From this measurement, the transmissiblities of each subject were obtained. The second one was the measurement of the joint position by the device having pointer and the measurement of contact position between the human body and the seat by body pressure distribution. The third one was the measurement of the seat and back cushion by dummy. The biomechanical model parameters were obtained by matching the simulated to the experimental transmissiblities at the hip, back, and head.

• Clinical Pain
• /
• v.18 no.2
• /
• pp.121-125
• /
• 2019

Arthritis of hip joints deteriorates the quality of life in ankylosing spondylitis (AS) patients. Secondary to the articular inflammatory process, the shortened hip-girdle muscles contribute to the decreased joint mobility which may lead to the functional impairment. As the limitation of range of motion (ROM) usually progress slowly, clinicians regard it as a chronic condition and prescribe long-term therapy. However, by short-term intensive multimodal treatment, a 20-year-old man diagnosed as AS with severely limited hip joint ROM who relied on crutches doubled the joint angle and could walk independently only within 2 weeks. The combination included intra-articular steroid injection, electrical twitch obtaining intramuscular stimulation, extracorporeal shock wave therapy, heat, manual therapy, and stretching exercises. The management focused on the relaxation of hip-girdle muscles as well as the direct control of intra-articular inflammation. Hereby, we emphasize the effectiveness of intensive multimodal treatment in improving the function even within a short period.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.107-118
• /
• 2008

In this study, lower extremity joint kinematics and kinetics and lumbar lordosis were investigated for two different symmetrical lifting techniques(squat and stoop) using the three-dimensional motion analysis. Twenty-six male volunteers lifted boxes weighing 5, 10 and 15kg by both squat and stoop lifting techniques. There were not significant differences in maximum lumbar joint moments between the two techniques. The hip and ankle contributed the most part of the support moments during squat lifting, and the knee flexion moment played an important role in stoop lifting. The hip, ankle and lumbar joints generated power and only the khee joint absorbed power in the squat lifting. The knee and ankle joints absorbed power, the hip and lumbar joints generated power in the stoop lifting. The bi-articular antagonist muscles' co-contraction around the knee joint during the squat lifting and the eccentric co-contraction of the gastrocnemius and semitendinosus were found to be important for straightening up during the stoop lifting. At the time of lordotic curvature appearance in the squat lifting, there were significant correlations in all three lower extremity joint moments with the lumbar joint. Differently, only the hip moment had significant correlation with the lumbar joint in the stoop lifting. In conclusion, the knee extension which is prominent kinematics during the squat tilling was produced by the contributions of the kinetic factors from the hip and ankle joints(extensor moment and power generation) and the lumbar extension which is prominent kinematics during the stoop lifting could be produced by the contributions of the knee joint kinetic factors(flexor moment, power absorption, bi-articular muscle function).

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.95-101
• /
• 2017

The purpose of this study was to investigate the biomechanical of K-Pop dance movement. The study was conducted on 15 male and 15 female subjects in 20-30 age groups. And they choose 150 K-Pop dance choreographies in the top 10 ranking of the main charts. We analyzed the RoM, joint moment and impulse force of the highlight movements. First, During the K-Pop dance motion, the usage of knee joints are more than the hip joints and the ankle joints, and female dancers has a larger range of motion than the male dancers. Second, male dancer uses more than female dancers when they compared the load of male dancers and female dancers. In particular, flexion and extension of the hip joints are mostly used in this study. Third, the impulse force of male dancers was greater than of female dancers, but it was statistically insignificant, this is equal to the impulse on walking. In conclusion, Female dancers use more range of motion than male dancers, but male dancer choreography requires greater torque, which can strain joints. Most choreographic exercises involve movements such as hip joint, knee joint, flexion of ankle joint, extension, rotation, and jumping.

• Physical Therapy Korea
• /
• v.28 no.1
• /
• pp.13-17
• /
• 2021

A normal range of motion is essential for performing activities of daily living. The capsular pattern is the proportional motion restriction in range of motion during passive exercises due to tightness of the joint capsule. Although the capsular pattern is widely referred to in clinical practice, there is no scientific evidence to support the concept. In this review, the appropriateness of the capsular pattern for evaluation of joint pathology was assessed. In the Textbook of Orthopaedic Medicine written by Cyriax, the capsular pattern did not specify how much reduction in angular motion is considered motion restriction. As the definition proposed initially was unclear, different methods have been used in previous studies investigating capsular pattern. In addition, the capsular pattern described all the major joints of the human body, but only the hip joint, knee joint, and shoulder joint were studied in experimental studies. Sensitivity and specificity were reported in one study and were meaningful in specific pathologies (loss of extension to loss of flexion). There was no consensus on the reliability and validity. In summary, the capsular pattern suggested by Cyriax or Kaltenborn is not supported or applies only to certain conditions. Various components around a joint complement each other and provide stability to the joint. It is recommended that the therapist perform multiple assessments rather than rely on a single assessment when evaluating joints.

• Journal of Biomedical Engineering Research
• /
• v.36 no.5
• /
• pp.235-239
• /
• 2015

The purpose of this study was to investigate the unstable plate system for the advanced balance ability. 7 male volunteers (age $33.7{\pm}1.2$ years, height $174.7{\pm}3.8cm$, weight $86.0{\pm}3.6kg$, BMI $28.2{\pm}2.0kg/m^2$) performed the partial squat motion on the shape of CAP type(${\cap}$) and BOWL type(${\cup}$) plate system. The range of motion (ROM) and muscle activation were acquired by the motion analysis system and the EMG system. Results of ROMs of the CAP type plate system were shown the widely range of the deviation in the ankle joint on the sagittal plane (sagittal plane - hip joint $10.7^{\circ}$ > $5.4^{\circ}$, knee joint $16.3^{\circ}$ > $6.4^{\circ}$, ankle joint $18.8^{\circ}$ > $6.3^{\circ}$ ; transverse plane - hip joint $3.5^{\circ}$ > $1.8^{\circ}$, knee joint $5.3^{\circ}$ > $3.4^{\circ}$, ankle joint $11.3^{\circ}$ > $5.3^{\circ}$ ; frontal plane - hip joint $0.9^{\circ}$ > $0.5^{\circ}$, knee joint $0.8^{\circ}$ > $0.6^{\circ}$, ankle joint $4.8^{\circ}$ > $3.7^{\circ}$). Muscle activation results of the CAP type plate system were indicated higher in major muscles for balance performance than the BOWL type plate system (vastus lateralis 0.90 > 0.62, peroneus longus 0.49 > 0.21, biceps femoris 0.38 > 0.14, gastrocnemius 0.11 > 0.05). These findings may indicate that the CAP type plate system would expect better effectiveness in perform the balance training. This paper is primary study for developing balance skills enhancement training device.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.2
• /
• pp.89-96
• /
• 2019

Objective: The purpose of this study was to investigate biomechanical comparisons of kettlebell two-arm swings after different somatosensory interventions on joint ranges of motion (ROM) and muscle activations. Method: Fourteen kettelbell novices (age: $22.92{\pm}3.23yrs$, mass: $75.75{\pm}9.94kg$, height: $172.03{\pm}5.49cm$), consisting of male college students, participated in this study and performed two-arm kettlebell swings in different conditions. Three different somatosensory interventions were the applications of heavy mass kettlebell (20 kg), taping on gluteus muscles, and unstable mat condition. All subjects performed pre-intervention swings and post-intervention swings, respectively. Statistical analysis were performed on results of joint kinematics and electromyographies of major muscles. Results: Results showed significant increases in ROM of hip and decreases in ROM of shoulder after unstable mat trials. In addition, the application of unstable mat during kettlebell swings induced higher muscle activations in gluteus maximus muscle during only upward phase of two-arm kettlebell swings. Conclusion: For beginner, the application of unstable surface would increase in hip joint ranges of motion with enhancement of gluteus muscles.