• 한국컴퓨터정보학회논문지
• /
• 제28권2호
• /
• pp.99-110
• /
• 2023

논문은 LiDAR 점군 데이터를 사용하여 흉고 직경과 수고를 예측하는 ForestLi 시스템을 제안한다. ForestLi 시스템이 LiDAR 점군 데이터를 처리하는 과정은 다음과 같이 여러 단계로 진행된다. 다운샘플링, 이상점 제거, 지표면 분할, 지표면 정규화, 수간 추출, 개체목 분할, 흉고 직경 측정, 수고 측정. LiDAR 점군 데이터를 처리하는 상용 시스템 LiDAR360은 하측 식생과 개체목 분할 오류를 사용자가 직접 수정해야 한다. ForestLi 시스템은 하측 식생에 해당하는 LiDAR 점군 데이터를 자동으로 제거한다. 결과적으로 ForestLi 시스템이 LiDAR360보다 전체 수행시간을 줄이고, 흉고 직경과 수고 예측의 정확성을 높였다. 실험을 통해서 제안된 ForestLi가 LiDAR360 시스템보다 흉고 직경과 수고 측정의 정확성과 전체 실행시간 측면에서 우수하다는 것을 보여주었다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.55-58
• /
• 2007

This study describes a problem of the Original Bench Mark which is used currently. We calculate New Mean Sea Level(MSL) in Incheon Port using tide data for 57 months and take 8 points GPS/Leveling data in research area. We calculate orthometric height of one control point using tide data and GPS/Leveling data. After fixed the control point, we decide final orthometric heights using relative geoidal height and ellipsoidal height from GPS survey. To analysis the Original Bench Mark compares final orthometric heights with the orthometric heights in Korea height system. We get the result that the New Original Bench Mark's height is 26.7176m. It appears 3.05cm difference as the Original Bench Mark's height is 26.6871cm in Korea height system.

• 한국연소학회지
• /
• 제1권1호
• /
• pp.41-49
• /
• 1996

Effects of ambient geometry on the liftoff characteristics are experimentally studied for nonpremixed turbulent jet flames. To clarify the inconsistency of the nozzle diameter effect on the liftoff height, the ambiences of finite and infinite domains are studied. For nonpremixed turbulent jet issuing from a straight nozzle to infinite domain, flame liftoff height increases linearly with nozzle exit mean velocity and is independent of nozzle diameter. With the circular plate installed on the upstream of nozzle exit, flame liftoff height is lower with plate at jet exit than without, but flame liftoff characteristics are similar to the case of infinite domain. For the confined jet having axisymmetric wall boundary, the ratio of the liftoff height and nozzle diameter is proportional to the nozzle exit mean velocity demonstrating the effect of the nozzle diameter on the liftoff height. The liftoff height increases with decreasing outer axisymmetric wall diameter. At blowout conditions, the blowout velocity decreases with decreasing outer axisymmetric wall diameter and liftoff heights at blowout are approximately 50 times of nozzle diameter.

• 설비공학논문집
• /
• 제10권1호
• /
• pp.129-136
• /
• 1998

Pressure drop and heat transfer characteristics of a periodically fully developed flow in the flat channel with protrusions are investigated. The effects of shape and location of protrusion on the pressure drop and heat transfer are numerically analyzed in the present study. Taguchi method is used to optimize these parameters. It is found that the ratio of the height of protrusion to channel height shows larger influence on the pressure drop and heat transfer than the ratio of the length of protrusion to module length. As the height of protrusion increases, pressure drop and heat transfer increase, but if the height of protrusion exceeds 2/3 of the channel height, there is a substantial pressure drop. The results also show that the optimal length and height of protrusion are half of the module length and half of the channel height, respectively.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.90-94
• /
• 1997

Many workers like welders are working in squat sitting postures with te object on the ground for an entire work shift. It is suspected that such prolonged squat sitting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to quantitatively evaluate the physical stress caused by the prolonged squat sitting and to recommend a safe work/rest schedule for the task with squat sitting posture based on the lab experiment. In this study, 8 healthy student subjects participated in the experiment. They maintained a squat sitting posture for 16 minutes with 4 different stool height conditions: no stool, 10cm hight, 15cm height, 20cm height. Every 2 minutes, the discomfort was subjectively assessed using the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort rating, we found that 10cm height stool relieved the workload most. Discomfort rating results also indicated that 20cm height stool showed the heghest workload, and that there was no difference in workload between 15cm height and no stool. We recommend to provide the workers with 10cm height stool for prolonged squat sitting tasks.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.105-112
• /
• 2009

The purpose of this study is to investigate a top floor, indoor, thermal environment by comparison between the indoor air temperature and the rooftop surface temperature, and between the indoor air temperature and the outdoor air temperature using an experimental model. The model experiment was conducted with 4 cases,: no-rainfall, 1 em-height, 10 em-height and 20em-height of rainfall on the rooftop. According to the results of the height of stored rainfall, the average air temperature difference between the indoor and outdoor air with 1, 10 and 20 em-height of rainfall on the rooftop was $4.0^{\circ}C$, rooftop $1.2^{\circ}C$ and rooftop $1.0^{\circ}C$, respectively. The upper 10 em-height of rainfall on the rooftop acted to decrease the indoor air temperature on the top floor.

• 비파괴검사학회지
• /
• 제2권1호
• /
• pp.10-16
• /
• 1982

This study was carried out to measure the flaw height of welds in consideration of the effective probe angle in ultrasonic oblique detection. Specimens with inserted artificial flaws were made and flaw heights were estimated from detecting these specimens. Two different methods were applied to estimate flaw heights. From the result of the experiment, flaw height could be measured within the accuracy of 15% percent error and the difference between the probe distance method and beam path method is about 5% relatively small. It is considered that the results obtained this experimental study could be helpful informal ions for measuring flaw height.

• Journal of Forest and Environmental Science
• /
• 제27권1호
• /
• pp.47-54
• /
• 2011

Allometry and basal area equations were developed with various tree measurement variables for the major species; Quercus variabilis, Quercus mongolica, Pinus koraiensis and Larix leptolepis in Korea. For allometry models, the relationships between total height-DBH, crown width-DBH, height to the widest portion of the crown-total height, and height to base of crown-total height were investigated. Multiple regression methods were used to relate annual basal area growth to tree variables of initial size (DBH, total height, and crown width), relative size (relative diameter and relative height) as well as competition measures (competition index, crown class, and live crown ratio).

• East Asian mathematical journal
• /
• 제32권1호
• /
• pp.61-75
• /
• 2016

If ${\phi}$ is a polarizable endomorphism on a projective variety, then the Weil height machine guarantees that ${\phi}$ satisfies Northcott's theorem. In this paper, we show that Northcott's theorem only holds for polarizable endomorphisms and generalize this result to arbitrary dominant endomorphisms: we introduce the height expansion and contraction coefficients which provide weak Northcott's theorem for dominant endomorphisms. We also give some applications of the height expansion and contraction coefficients.

• Clinical and Experimental Pediatrics
• /
• 제51권10호
• /
• pp.1090-1095
• /
• 2008

목적: 소아 간질 환자에서 장기적인 신장의 변화 및 그에 영향을 미치는 인자들에 대해 연구하고자 하였다. 방법: 1996년 1월부터 2003년 12월까지 부산대학병원 소아과에서 처음으로 간질 진단을 받은 577명 중 최소 3년 이상 항경련제를 복용한 148명(남아 82명, 여아 66명)을 대상으로 전향적 연구를 시행하였다. 항경련제 복용 시작부터 매년 신장 측정을 하였고 성별, 경련의 형태, 간질의 원인, 항경련제 복용 전 경련 횟수, 경련 조절, 단일 및 복합약물요법, 항경련제 복용 전 신장, 복용시작 나이, 복용 기간과 같은 인자들에 따라 복용 전과 최종 방문시의 신장의 변화를 SDS를 구하여 비교 분석하였다. 결 과: 대상 환아의 항경련제 복용 시작 시 평균 연령은 6.69세였고, 평균 복용 기간은 5.76년이었다. 항경련제 복용 전의 평균 신장 SDS는 -0.059였고 복용 후에는 0.101이었다(P=0.09). 복용 전 경련 횟수가 1개월에 1회 미만인 군(P=0.09), 단일 약물군(P=0.06)에서는 신장 SDS가 증가하였으나 통계적인 유의성은 보이지 않았다. 또 복용 후에 경련 조절이 잘 되었던 군(P=0.04), 복용 전의 신장 SDS가 (-)인 군(P=0.001)과 복용 기간이 6년 미만인 군(P=0.02)에서는 신장의 SDS가 유의한 증가를 보였다. 그 외의 군에서는 항경련제 복용 전과 복용 후 평균 신장 SDS에 유의한 차이가 발생하지 않았다. 결론:정상 경구 식이를 하는 소아 간질 환자에서 항경련제 투여 후 신장 성장은 통계적으로 유의하게 증가하지 않았다. 하지만 경련 조절이 잘 되는 군과 항경련제 치료 기간이 짧았던 군에서 신장 성장이 유의하게 증가하였다.