• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.635-639
• /
• 1991

Monolithic gels in the ZrO2-SiO2 system containing up to 30 mol% ZrO2 were prepared from the mixed solutions of Zr(O.nC3H7)4 and partially prehydrolyzed Si(OC2H5)4 (Tetraethyl orthosilicate) by the sol-gel method. The effect of parameters such as the hydrolysis temperature, the amount of water and HCl on the hydrolysis condensation process was investigated and the obtained gels were studied by the IR spectra and TG-DTA. The results showed that the gelation time becomes shorter with increasing content of HCl, H2O and gelation temperature, and that the polymerization was more easily completed with the higher water volume causing the elimination of unreacted organic groups.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.195-206
• /
• 2009

We investigated natural background and enrichment characteristics and predicted geochemical disaster for stream sediments in the Hamyang-Sancheong area. Stream sediments samples were collected 95 ea in study area. The stream sediments were well known that had not possibility of contamination effect and represented drainage basins. We got the major and hazardous elements concentrations by XRF, ICP-AES and NAA analysis methods. Acid decomposition for the ICP-AES has been used $HClO_4$ and HF with $200^{\circ}C$ heating at 1st and after that $HClO_4$ HF and HCl with $200^{\circ}C$ heating at 2nd stage. We could know the characteristics that concentration of Cu and Co decreased when concentration of $SiO_2$ increased in correlation analysis. The enrichment factor of the stream sediments was below 2 in study area. This result indicated that study area belonged to moderate enrichment. The stream sediments of Hamyang area were enriched in order of Pb>Th>Cr>V>Co>Cu and those of Sancheong area were enriched in order of Pb>Th>Cr>Co>V>Cu. The enrichment factor(E.F.) of the Pb, Cr, Co and V was similar between Hamyang and Sancheong area. The enrichment factor of the Th was higher in Hamyang area and that of the Cu was higher in Sancheong area. The enrichment factor of the Pb was highly enriched in all study area than earth crust mean. But we could know that study area was not exposed to the pollution of the Pb through the tolerable level.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.18-24
• /
• 2017

The $FeCl_3$ solution has been used as an etchant for etching of metal. It is necessary to reuse the etching solution because waste $FeCl_3$ etchant generated after use has provided environmental and economic problems. In this study, HCl was mixed with the $FeCl_2$ solution and then $H_2O_2$ was added into the mixed solution to oxidize the $Fe^{2+}$. During the oxidation process, oxidation-reduction potential (ORP) was measured and the relationship between ORP and oxidation ratio was investigated. As a result, this study found that the ORP was increased with increasing the concentration of HCl and $H_2O_2$, while the ORP is decreased with oxidation progress. Such a behavior was in good agreement with Nernst's equation. Also, the oxidation efficiency reached about 99% when a sufficient amount of HCl and $H_2O_2$ were added.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.111-116
• /
• 2007

We examined the antimicrobial activity of electrolyzed alkaline water against spoilage microorganisms in rice warehouses. Dominant microbial species were isolated from paddy, dust and air samples of three different warehouses located in Gyeongnam. We used electrolyzed alkaline water (EW) manufactured over various treatment times. The acidities (pH) of EW treated for 30 sec, 1, 2, 3, and 4 min were 8.89, 8.91, 9.20, 9.35, and 9.22, respectively. HClO contents were 150.7, 314.2, 191.8, 104.1, and 255.3 ppm, respectively. EW inhibited bacteria, yeasts, and molds; also, it inhibited three yeast species strongly. The antimicrobial effects of EW increased as pH values and HClO contents increased. EW obtained after 30 sec treatment retained the antimicrobial activities after 14 days whereas EW obtained after 1 and 2 min treatments retained the antimicrobial activities after 21 and 24 days, respectively.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.297-304
• /
• 1998

The three analysis methods, EPA method 3050, the method offered by Ministry of Environment in Korea, and modified method corrected in this laboratory, were studied to investigate the effect of matrix on the analysis of inorganic priority pollutants. 7 inorganic priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg) were spiked to the plating, leather, paper, electric, and dye sludges. Mean recovery of the elements except Hg was 95.5% when the procedure of EPA method was applied. However, recovery by the two other extraction methods showed 11.1% and 27.7%, respectively. Digestions were done by MDS (microwave digestion system) and $HNO_3+HClO_4$ methods. To study organic and inorganic matrix effect, samples were made by adding triethanol amine as a organic matrix and $FeCl_3{\cdot}6H_2O$+$AlCl_3{\cdot}6H_2O$ as a inorganic matrix, respectively. The extracts were analyzed by AAS and HG-AAS. Mean recovery of the elements by the $HNO_3+HClO_4$ procedure, except Hg, gave better result than that of the MDS method. Mean recovery of elements was decreased when organic and inorganic matrices were added in the sludge samples. The procedure of MDS and $HNO_3+HClO_4$ digestion gave higher recoveries than that of direct analysis. In general, the results of the studies showed a significant matrix effect on the inorganic priority pollutants analysis in sludges.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.568-575
• /
• 1999

Two different digestion procedures for the simultaneous determination of major and platinum-group element(PGE) in spent automobile catalysts containing PGE and silicates by inductively coupled plasma atomic emission spectrometry(ICP-AES) are compared. Combinations of mixed aids using HF, $HNO_3$, HCl, $HClO_4$, $H_2O_2$, and $H_3BO_3$ are utilized for the hot plate dissolution method and the closed-vessel microwave digestion method, The latter method has been shown to be relatively superior in terms of recovery, analysis time, and amount of aqua regia (3 parts HCl + part $HNO_3$ required to dissolve PGE in comparison with conventional open vessel hot-plate dissolution. The best results were drawn from the following conditions: In closed Teflon PFA vessels under microwave heating with temperature/pressure regulation, a 0.25 g portion of sample was digested in 2 mL of HF, 2 mL of $HNO_3$ and 6mL of HCl under the pressure of 200 psi(13.79 bar) at $180^{\circ}C$ for 1hr, followed by a second digestion stage with 16 mL of 5%(w/v) boric acid under the pressure of 20 psi(1.38 bar) at $100^{\circ}C$ for 10 min. After the microwave heating, the sample was post-treated with 10 mL of aqua regia twice by hot-plate heating. This condition gives the PGE recovery within 85~110% and the relative standard deviations within 2%. The method developed can therefore be regarded as an alternative method for routine analysis of spent automobile catalysts.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.117-124
• /
• 2002

This study was carried out to investigate variation of heavy metal contents for feed materials during composting and to evaluate the effect of pre-treatment methods on heavy metal analysis. Dry ashing, $HNO_3-HClO_4$, aqua-regia, HCl reflux, $HNO_3-HClO_4-HF$, autoclaving methods of $HNO_3$, HCl, and $HNO_3(2+1)$ were used as pre-treatment for heavy metal analysis. In analyzing standard material SRM 2781, recovery efficiencies of pre-treatment methods were 50-60% for Cr and Zn, >100% for Ni, and 80-90% for Cd and Cu. Recovery efficiency of dry ashing for SRM 2781 was the lowest. In composting raw material, Cd concentration by autoclaving methods was 3 to 4 times higher than the other methods and recovery efficiency of dry ashing was also the lowest. During composting, Cd content was the highest in autoclaving. Cr and Cu concentrations were the lowest in dry ashing and aqua-regia, respectively. Variation coefficients of Pb and Zn between pre-treatment methods were generally low.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.329-333
• /
• 2016

Disinfection by electrolysis would be useful for small wastewater treatment plant, combined sewer overflow, ballast water, swimming pool, and fish farming, where the transport, storage, and the use of chlorine gas is limited. This study investigated the feasibility of the electrolysis of dilute hydrochloric acid (HCl) for disinfection. The effects of HCl concentration, voltage and reaction time on the generation of oxidizing agents, HOCl, $O_3$, and $H_2O_2$, were examined in a series of batch test. The highest current efficiency was 99.3% which was found at 2.2%, 3 V, and 5 min of HCl concentration, voltage, and reaction time, respectively. Continuous electrolysis at 2.2% HCl, 3 V, and 5 min of the hydraulic retention time showed 97.4% of the current efficiency. Addition of sodium chloride up to 20 g/L linearly increased the oxidizing agents production. 92.2% of total coliforms were removed by the contact with the electrolyzed water.

• YAKHAK HOEJI
• /
• v.19 no.4
• /
• pp.240-245
• /
• 1975

The quantitative analysis of ethambutol.2HCl as well as commercial ehambutol preparations was undertaken by gas-liquid chromatography by finding optimum conditions, such as the use of internal standard, stability of an ethambutol-2HCl-caffeine standard solution, and the effect of column temperature, N, O-bis-(trimethylsily) acetamide [B.S.A.] concentrations and other substances present in the preparations. Under the chromatiographic conditions, an ethambutol-2HCl. caffeine standard, 9 min, 30sec. The relative molar response of ethambutol.2HCl and caffeine studied was 2.08. Ethambutol.2HCl could be quantitated up to 1$\times$10$^{-8}$ moles. the possible decomposition of B.S.A. due to the moisture when tested and the incoplete reaction for silylation could be minimized.

• Carbon letters
• /
• v.5 no.3
• /
• pp.103-107
• /
• 2004

The atmospheric pressure plasma treatments ($Ar/O_2$ and $Ar/N_2$) of activated carbon fibers (ACFs) were carried out to introduce hydrophilic functional groups on carbon surfaces in order to enhance the hydrogen chloride gas (HCl) adsorption. Surface properties of the ACFs were determined by XPS and SEM. $N_2$/77 K adsorption isotherms were investigated by BET and D-R (Dubinin-Radushkevich) plot methods. The HCl removal efficiency was confirmed by HCl detecting tubes (range:1~40 or 40~1000 ppm). As experimental results, it was found that all plasma-treated ACFs showed the decrease in the pore volume, but the HCl removal efficiency showed higher level than that of the untreated ACFs. This result indicated that the plasma treatments led to the conformation of hydrophilic functional groups on the carbon surfaces, resulting in the increase of the interaction between the ACFs and HCl gas.