• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.153-160
• /
• 2016

The inhibition ability of N,N-bis(2,4-dihydroxyhydroxybenzaldehyde)-1,3-Propandiimine (DHBP) as a schiff base against the corrosion of API-5L-X65 steel in 1 M HCl solution was evaluated by electrochemical impedance spectroscopy, potentiodynamic polarization and scanning electron microscopy. Electrochemical impedance studies indicated that DHBP inhibited corrosion by blocking the active corrosion sites. The inhibition efficiency increased with increasing inhibitor concentrations. EIS data was analysed to equivalent circuit model and showed that the charge transfer resistance of steel increased with increasing inhibitor concentration whilst the double layer capacitance decreased. The adsorption of this compound obeyed the Langmuir adsorption isotherm. Gibbs free energy of adsorption was calculated and indicated that adsorption occurred through physical and spontaneous process. The corrosion inhibition mechanism was studied by potential of zero charge. Polarization studies indicated that DHBP retards both the cathodic and anodic reactions through adsorption on steel surface. Scanning electron microscopy was used to study the steel surface with and without inhibitor.

• 대한소아치과학회지
• /
• 제3권1호
• /
• pp.12-17
• /
• 1976

The study is about the effect of tetracycline-HCl on the amelogenesis and the dentinogenesis of the albino rats by means of histochemistry and fluorescence microscopy. Females in oestrus were mated overnight and examined the next morning for evidence of copulation. The mothers were intraperitonealy injected with a single dose of tetracycline-HCl from the eighth to tenth day of gestation. The heads of new born rats were fixed in Carnoy's solution and 10% formalin solution. The staining methods were alizarin red S stain, PAS reaction, colloidal iron reaction, Morin's stain and hematoxylin-eosin stain, The results were as follows: 1. By the single injection of tetracycline, the matrix formation of enamel and dentin were disturbed, and the shape and arrangement of ameloblast and odontoblast were distorted. 2. It seemed that, with the higher dose of tetracycline, the positive materials of PAS reaction were increased in the disturbed enamel and dentin matrix, but those of alizarin red S stain and colloidal iron reaction were decreased. 3. The fluorescence intensity in the disturbed enamel and dentin matrix were higher than the other areas and appeared to increase gradually with the higher dose of tetracycline.

• 자원리싸이클링
• /
• 제27권2호
• /
• pp.48-54
• /
• 2018

강염기성 음이온 교환 수지인 Amberlite IRA 402와 AG 1-X8로 염화암모늄용액에 함유된 금(III)의 이온교환을 회분식 실험으로 조사했다. 두 수지 모두 염화암모늄용액에서 금(III)을 잘 흡착했으며, AG 1X-8이 Amberlite IRA 402보다 우수한 금(III) 흡착거동을 보였다. AG 1-X8 수지의 금(III)의 흡착은 Langmuir 등온흡착과 잘 일치했고 흡착용량은 355 mg/g이었다. AG 1X-8에 흡착된 금(III)은 과염소산으로 세출할 수 있으며, 과염소산의 농도 증가에 따라 세출률이 증가하였다.

• 한국재료학회지
• /
• 제24권5호
• /
• pp.271-276
• /
• 2014

Silica nano-powder (SNP) is an inorganic material able to provide high-performance in various fields because of its multiple functions. Methods used to synthesize high purity SNP, include crushing silica minerals, vapor reaction of silica chloride, and a sol-gel process using TEOS and sodium silicate solution. The sol-gel process is the cheapest method for synthesis of SNP, and was used in this study. First, we investigated the shape and the size of the silica-powder particles in relation to the variation of HCl and sodium silicate concentrations. After drying, the shape of nano-silica powder differed in relation to variations in the HCl concentration. As the pH of the solution increased, so did the density of crosslinking. Initially, there was NaCl in the SNP. To increase its purity, we adopted a washing process that included centrifugation and filtration. After washing, the last of the NaCl was removed using DI water, leaving only amorphous silica powder. The purity of nano-silica powder synthesized using sodium silicate was over 99.6%.

• 통합자연과학논문집
• /
• 제2권4호
• /
• pp.233-236
• /
• 2009

This study was undertaken to measure the electrochemical corrosion of amorphous $Zr_{65}Al_8Ni_{15}Cu_{12}$ (at.%) alloy ribbon under various conditions, including 0.4 mM HCl solution, and for various values of the pH and the immersion time. The corrosion potentials($E_{corr}$) for the amorphous $Zr_{65}Al_8Ni_{15}Cu_{12}$ alloy in 0.4 mM HCl decreased with increasing temperature; the corrosion current density($I_{corr}$) increased with increasing temperature in general. The polarization resistance($R_p$) was inversely proportional to the corrosion rate. While pH=7, 9, 11 was not as sensitive as pH=3, 5, pH=3 was more sensitive for amorphous $Zr_{65}Al_8Ni_{15}Cu_{12}$ alloy than other pHs specially. The change of mass in the 70 mM $H_2SO_4$ solution with immersion time was the greatest in the first 100 h.

• Corrosion Science and Technology
• /
• 제22권5호
• /
• pp.330-340
• /
• 2023

The objective of this study was to analyze effects of aging time on property degradation of super austenitic stainless steel of PRE 52.8 and super duplex stainless steel of PRE 48.7. To analyze corrosion properties based on aging time, a critical pitting temperature test was performed in a solution of 6% FeCl₃ + 1% HCl and an anodic polarization test was performed in deaerated 0.5N HCl + 1N NaCl solution at a temperature of 50 ℃. Surface hardness was measured to analyze mechanical properties. It was found that corrosion properties and mechanical properties deteriorated rapidly as aging time increased. Critical pitting temperature had the most effect on critical aging time at which property changes occurred rapidly, followed by pitting potential and hardness. This trend was found to be closely related to the fraction of sigma phase. Rate of sigma phase formation was found to be significantly faster in duplex stainless steel than in austenitic stainless steel.

• 대한화학회지
• /
• 제27권4호
• /
• pp.268-272
• /
• 1983

${\beta}$-디페닐글리옥심으로 침윤시킨 폴리우레탄 포옴을 사용하여 수용액에서 Pt(IV) 및 Ni(II) 이온으로부터 Pd(II) 이온의 추출을 시도하였다. Pd(II) 이온은 $0.01{sim}0.05M$ HCl 농도범위에서 정량적으로 추출이 되었으며 반면 같은 농도 범위에서 Pt(IV) 이온은 단지 미량 추출이 되었으나 Ni(II) 이온은 전혀 추출되지 않았다. 따라서 뱃치법에 의하여 $0.01{sim}0.05M$ HCl 용액에서 Pd(II)이온을 Pt(IV) 및 Ni(II)이온으로부터 선택적으로 분리가 가능하였으며 또한 용리법으로 Pd(II)의 제거 및 회수도 가능하였다.

• Carbon letters
• /
• 제13권1호
• /
• pp.44-47
• /
• 2012

We analyzed the effect of etchants for metal catalysts in terms of the characteristics of resulting graphene films, such as sheet resistance, hall mobility, transmittance, and carrier concentration. We found the residue of $FeCl_3$ etchant degraded the sheet resistance and mobility of graphene films. The residue was identified as an iron oxide containing a small amount of Cl through elemental analysis using X-ray photoelectron spectroscopy. To remove this residue, we provide an alternative etching solution by introducing acidic etching solutions and their combinations ($HNO_3$, HCl, $FeCl_3$ + HCl, and $FeCl_3+HNO_3$). The combination of $FeCl_3$ and acidic solutions (HCl and $HNO_3$) resulted in more enhanced electrical properties than pure etchants, which is attributed to the elimination of left over etching residue, and a small amount of amorphous carbon debris after the etching process.

• 대한화학회지
• /
• 제55권2호
• /
• pp.268-278
• /
• 2011

베타 차단제 억제제(atenolol, propranolol, timolol and nadolol)의 존재와 부존 하에서 0.1M HCl 용액에 담긴 알루미늄의 부식작용을 연구하였다. 이 연구에 무게감량, 변전위 편극, 전기화학 임피던스 분석법이 사용되었다. 억제 효과는 억제제의 농도 증가에 따라 증가하였으며, 온도가 증가함에 따라 감소하였다. 모든 억제제들은 Frumkin 등온을 따르는 알루미늄 표면에 흡착되었다. 부식반응은 전하이동과정에 의해 조절됨을 발견하였다. 억제 효과 측정을 위해 사용된 실험방법 들에 대해 조사한 결과 모두 억제효과가 우수하였다.

• 자원리싸이클링
• /
• 제12권3호
• /
• pp.38-45
• /
• 2003

화학평형, 물질수지 및 전기적 중성식을 고려하고 Bromley식으로 용질들의 활동도계수를 구하여 염산용액에서 염화니켈의 이온평형을 해석하였다. 본 연구에서 고려한 조성범위에서 니켈을 함유한 화학종의 대부분은 $Ni^{2+}$ 와 $NiCl^{+}$ 로 존재하고 니켈수산화물의 농도분율은 매우 낮으나, 용액의 pH가 증가함에 따라 $Ni_4$ $(OH)_{4}^{4+}$ 의 농도분율은 급격히 증가하였다. $NiCl_2$ $-HCl-NaOH-H_2$O 계에 대해 전해질의 농도를 변화시키며 $25^{\circ}C$에서 측정한 pH값과 계산값은 이온강도 9.4m정도의 범위까지 서로 잘 일치하였다.