• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.83-96
• /
• 2003

Effect of Nutrient Concentrations, fertigation frequency, and learching percentage on crop growth and nutrient concentrations in root media were evaluated. The treatment of each irrigation with $50 mg.L^{-1}$ of nitrogen in stage 2 and increase to $80 mg.L^{-1}$ nitrogen in stage 3 had the highest crop growth at 34 days after sowing among treatments tested. Feeding with low nutrient concentrations and elevated frequency decreased crop growth. In treatments of each leaching percentage, feeding with low nutrient concentrations and elevated frequency resulted in increased tissue nutrient contents. The less tissue potassium content and higher calcium and magnesium contents were observed in treatment of 50% leach than those in 0% leach. All treatment tested had soil solution pH higher than 6.8. Electrical conductivity in treatments of 50% leach were lower than those of 0% leach. Feeding with low nutrient concentrations and elevated feeding frequency in each leaching percentage resulted in increased electrical conductivity in soil solution of root media. Trends of medium nutrient concentrations were similar to those of electrical conductivity.

• Explosives and Blasting
• /
• v.18 no.1
• /
• pp.53-58
• /
• 2000

Thermal analysis, analysis of combustion residue and combustion characteristics measure ment such as burning rate or temperature were carried out to clarify the combustion mechanism of a tungsten- potassium perchlorate-barium chromate chromate delay powder. The results obtained are as follows. The main reaction of the delay powder of tungsten-potassium perchlorate-barium chromate is the oxidation of tungsten by potassium perchlorate. Barium chromate acts as a burning rate modifier, and the smaller the larger is the burning rate. Three types of delay composition used in this study show characteristic burning behavior. A stoichiomertric or a oxidizer-rich composition has a small linear burning rate. although it is has a large heat of combustion. On the other hand, a tungsten-excess or a fuel-rich composition with a small heat of combustion has a larger linear burning rate than the former, showing a small fractional oxidation of tungeten (below 10%) contained in the delay powder. From these results, a surface combustion mechanism is proposed for the combustion mechanism of this delay powder.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.517-523
• /
• 2016

The contents of functional components in the organically agricultural perilla leaves were compared with the perilla leaves grown in conventional condition. Perilla leaves used in the experiment were purchased or harvested from each three organic farm houses and conventional farm houses in Miryang city. The analyzed components included total phenol, total flavonoid, vitamin C, vitamin E, ${\beta}$-carotene, GABA, caffeic acid, rosmarinic acid, Total N, Zn, Fe, Ca, Mg, Na, K, and P. Organically grown perilla leaves had vitamin E 49% greater than the conventional perilla leaves, and 21% for TN, 29% for Ca, and 73% for Mg, while conventionally grown perilla leaves contained K 16% higher than organic ones. Other components were not showed the differences.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.19-29
• /
• 2017

An objective of this study is to demonstrate the validity of using a small wind turbine to recover the fluid energy flowing out of an exhaust duct for the generation of power. In these experiments, a butterfly wind turbine of a vertical axis type (D = 0.4 m) is used. The output performance is measured at various locations relative to the exit of a small wind tunnel (W = 0.65 m), representing the performance expected in an exhaust duct flow. Two-dimensional numerical analysis qualitatively agrees with the experimental results for the wind turbine power coefficient and rate of energy recovery. When the turbine is far from the duct exit (more than 2.5 D), an energy recovery rate of approximately 1.3% is obtained.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.1
• /
• pp.73-80
• /
• 2004

숭어의 생식주기를 밝히기 위해 2002년 2월부터 2003년 3월까지 제주도 동남부 연안에서 채집하였고, 난모세포의 발달과정을 조직학적 방법으로 관찰하였다. 난모세포의 발달과정은 GSI변화와 밀접하였다. GSI는 9월에 급격히 증가하여 12월에 최고 값을 나타내었다. 난소의 조직학적 관찰결과, 염색인기와 주변인기의 난모세포는 연중 관찰되었으며,8월에는 일부에서 난황을 포함하는 난모세포가 관찰되었다. 대부분의 난모세포가 10월과 12월에는 난황구기 단계의 난모세포로 발달했다. 10월과 12월에 난황구기 난모세포들을 가진 개체의 출현이 가장 높았으며, 잔존여포와 퇴화 난모세포는 2월부터 관찰되었다. 숭어의 주 산란기는 11월에서 1월이고, 난군동기발달형의 난소를 가지며 외양으로 이동하여 산란하는 어류에 속한다.

• The Plant Pathology Journal
• /
• v.28 no.4
• /
• pp.446-452
• /
• 2012

The effect of heavy metals on seedling growth and pigment levels was studied in Arabidopsis using essential (Cu, Mn, and Zn) and non-essential metals (Pb and Hg). Generally increasing the concentrations of the metals resulted in a gradual decrease in root and shoot lengths, a decrease in chlorophylls, an increase in anthocyanins and a fluctuation in carotenoid content depending on the metal types. The toxicity of the metals decreased in the following order: Cu > Hg > Pb > Zn > Mn. Among the five metals, Cu was exceptionally toxic and the most potent inducer of anthocyanins. Pb induced the smallest quantity of anthocyanins but it was the strongest inducer of carotenoids. It suggests that the Cu-stressed Arabidopsis may use anthocyanins as its main antioxidants while the Pb-stressed Arabidopsis use carotenoids as its main protectants. All of the five metals induced an accumulation of anthocyanins. The consistent increase in anthocyanin content in the metal-stressed Arabidpsis indicates that anthocyanins play a major role in the protection against metal stresses.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.4
• /
• pp.367-378
• /
• 2016

Recently, it was reported that the role of mitochondria-reactive oxygen species (ROS) generating pathway in cisplatin-induced apoptosis is remarkable. Since a variety of molecules are involved in the pathway, a comprehensive approach to delineate the biological interactions of the molecules is required. However, quantitative modeling of the mitochondria-ROS generating pathway based on experiment and systemic analysis using the model have not been attempted so far. Thus, we conducted experiments to measure the concentration changes of critical molecules associated with mitochondrial apoptosis in both human mesothelioma H2052 and their ${\rho}^0$ cells lacking mitochondrial DNA (mtDNA). Based on the experiments, a novel mathematical model that can represent the essential dynamics of the mitochondrial apoptotic pathway induced by cisplatin was developed. The kinetic parameter values of the mathematical model were estimated from the experimental data. Then, we have investigated the dynamical properties of this model and predicted the apoptosis levels for various concentrations of cisplatin beyond the range of experiments. From parametric perturbation analysis, we further found that apoptosis will reach its saturation level beyond a certain critical cisplatin concentration.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.441-444
• /
• 2009

The formation and structure of self-assembled monolayers (SAMs) by the adsorption of acetyl-protected octylthioacetate (OTA) on Au(111) in a catalytic tetrabutylammonium cyanide (TBACN) solution were examined by means of scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV). Molecular-scale STM imaging revealed that OTA molecules on Au(111) in a pure solvent form disordered SAMs, whereas they form well-ordered SAMs showing a c(4 × 2) structure in a catalytic TBACN solution. XPS and CV measurements also revealed that OTA SAMs on Au(111) formed in a TBACN solution have a stronger chemisorbed peak in the S 2p region at 162 eV and a higher blocking effect compared to OTA SAMs formed in a pure solvent. In this study, we clearly demonstrate that TBACN can be used as an effective deprotecting reagent for obtaining well-ordered SAMs of thioacetyl-protected molecules on gold.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1309-1312
• /
• 2009

Surface potential and growth processes of hexadecanethiol (HDT) self-assembled monolayers (SAMs) on Au(111) surfaces were examined by Kelvin probe method and scanning tunneling microscopy. It was found that surface potential strongly depends on surface structure of HDT SAMs. The surface potential shift for the striped phase of HDT SAMs chemisorbed on Au(111) surface was +0.45 eV, which was nearly the same as that of the flat-lying hexadecane layer physisorbed on Au(111) surface. This result indicates that the interfacial dipole layer induced by adsorption of alkyl chains is a main contributor to the surface potential change. In the densely-packed HDT monolayer, further change of the surface potential was observed, suggesting that the dipole moment of the alkanethiol molecules is an origin of the surface potential change. These results indicate that the work function of a metal electrode can be modified by controlling the molecular orientation of an adsorbed molecule.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.881-896
• /
• 2015

The authors' research group has developed a noncontact type of sensors which directly measure the inter-story drift displacements of a building during a seismic event. Soon after that event, such seismically-induced drift displacement data would provide structural engineers with useful information to judge how the stories have been damaged. This paper presents a scheme of estimating the story cumulative plastic deformation ratios based on such measured drift displacement information toward the building safety monitoring. The presented scheme requires the data of story drift displacements and the ground motion acceleration. The involved calculations are rather simple without any detailed information on structural elements required: the story hysteresis loops are first estimated and then the cumulative plastic deformation ratio of each story is evaluated from the estimated hysteresis. The effectiveness of the scheme is demonstrated by utilizing the data of full-scale building model experiment performed at E-defense and conducting numerical simulations.