• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.67-75
• /
• 2011

The faulty regulation of imprinting gene lead to the abnormal development of reconstructed embryo after nuclear transfer. However, the correlation between the imprinting status of donor cell and preimplantation stage of embryo development is not yet clear. In this study, to determine this correlation, we used the porcine spermatogonial stem cell (pSSC) and fetal fibroblast (pFF) as donor cells. As the results, the isolated cells with laminin matrix selection strongly expressed the GFR ${\alpha}$-1 and PLZF genes of SSCs specific markers. The pSSCs were maintained to 12 passages and positive for the pluripotent marker including OCT4, SSEA1 and NANOG. The methylation analysis of H19 DMR of pSSCs revealed that the zinc finger protein binding sites CTCF3 of H19 DMRs displayed an androgenic imprinting pattern (92.7%). Also, to investigate the reprogramming potential of pSSCs as donor cell, we compared the development rate and methylation status of H19 gene between the reconstructed embryos from pFF and pSSC. This result showed no significant differences of the development rate between the pFFs ($11.2{\pm}0.8%$) and SSCs ($13.3{\pm}1.1%$). However, interestingly, while the CTCF3 methylation status of pFF-NT blastocyst was decreased (36.3%), and the CTCF3 methylation status of pSSC-NT blastocyst was maintained. Therefore, this result suggested that the genomic imprinting status of pSSCs is more effective than that of normal somatic cells for the normal development because the maintenance of imprinting pattern is very important in early embryo stage.

• Journal of Korea Foundry Society
• /
• v.26 no.6
• /
• pp.267-271
• /
• 2006

Metal foam is a class of attractive materials, which exhibits unique combinations of physical, mechanical, thermal, electrical and acoustic properties. In particular, it is light and good at absorbing energy, which makes it attractive in automotive and aerospace applications weight is critical. In this paper, the Mg alloy foam was prepared by melt foaming method by addition of calcium as thickening agent, and $TiH_2$ or $CaCO_3$ powder as blowing agent. The macrostructural observation of foamed Mg showed that the pore structures of Mg alloy foam made by $CaCO_3$ as blowing agent were much better than that of foams made by $TiH_2$ as blowing agent. In addition, this paper showed the possible reason of fabrication magnesium alloy foam in proportion to blowing agent and the porosity range was about 40 to 76% as results value.

• BMB Reports
• /
• v.49 no.10
• /
• pp.560-565
• /
• 2016

Granzyme A (GzmA) was first identified as a cytotoxic T lymphocyte protease protein with limited tissue expression. A number of cellular proteins are known to be cleaved by GzmA, and its function is to induce apoptosis. Histones H1, H2B, and H3 were identified as GzmA substrates during apoptotic cell death. Here, we demonstrated that histone H4 was cleaved by GzmA during staurosporine-induced cell death; however, in the presence of caspase inhibitors, staurosporine-treated Raji cells underwent necroptosis instead of apoptosis. Furthermore, histone H4 cleavage was blocked by the GzmA inhibitor nafamostat mesylate and by GzmA knockdown using siRNA. These results suggest that histone H4 is a novel substrate for GzmA in staurosporine-induced cells.

• Korean Journal of Microbiology
• /
• v.33 no.3
• /
• pp.187-192
• /
• 1997

The strain producing biosurfactant was isolated from soil. The isolated strain was identified as the genus Tsukamurella through its morphological, cultural, physiological, menaquinone type, fatty acid composition characteristics. The highest biosurfactant production by Tsukamurella sp. 26A was observed after 4 days cultivation in the culture medium containing n-hexadecane 7%, $NaNO_{3}$ 0.2%, $K_2HPO_4$ 0.001%, $MgSO_{4}$ center dot $7H_{2}O$ 0.02%, $CaCl_2$ center dot $2H_{2}O$ 0.02%, yeast extract 0.02%(pH 6.8-7.0, 30^{\circ}C.$ The surface and interfacial tension of an aqueous solution reached 30 mNim and 1.5 mNim, respectively. The biosurfactant stabilized oil-in-water emulsion with a variety of hydrocarbons, edible oils and petroleum oils.

• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.37-42
• /
• 2007

The preparation of $TiC_{0.7}N_{0.3}$ powder by SHS in the system of $Ti-TiH_2-C$ ($N_2$ atmosphere) was investigated in this study. In the preparation of $TiC_{0.7}N_{0.3}$ powder, the effect of gas pressure, compositions such as Ti, $TiH_2$, C, and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $TiC_{0.7}N_{0.3}$ was $0.75Ti+0.25TiH_2+0.7C+0.5NaCl$. The $TiC_{0.7}N_{0.3}$ powder synthesized in this condition was a single phase with irregular shape.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.22 no.1
• /
• pp.89-99
• /
• 2009

인진호탕(茵蔯蒿湯)은 한의학에서 여러 가지 질환에 사용되어 왔다. 특히 간경의 습열(濕熱)로 인한 질환에 습열을 제거함으로써 증(證)의 완화에 많은 응용이 되어 왔다. 본 연구는 습열(濕熱)로 인한 질환중의 하나인 아토피 피부염에 그동안 응용이 적은 인진호탕(茵蔯蒿湯)을 실험적으로 응용함으로써 임상적인 가치를 가질 수 있는 지에 대한 기초연구를 진행하였다. 본 실험에 사용된 세포주는 rat leukemia (RBL-2H3) cells로 인진호탕(茵蔯蒿湯)은 알레르기와 관련된 사이토카인인 tumor necrosis factor (TNF)-$\alpha$, interleukin (IL)-4를 용량의존적으로 억제하였지만 세포독성은 일으키지 않았다. 그리고 동물실험에서 인진호탕(茵蔯蒿湯)은 PCA반응에서 충분한 억제효과를 나타내었다. 또한 Compound 48/80으로 유도된 anaphylaxis shock도 용량 의존적으로 억제함이 밝혀졌다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.313-316
• /
• 2013

• Journal of Energy Engineering
• /
• v.11 no.3
• /
• pp.254-261
• /
• 2002

The fabrication method for the main components of the polymer electrolyte membrane fuel cell stack such as electrodes, membrane-electrode assemblies, and bipolar plates was established for the effective electrode area of 240 ㎠. A counter-flow type 100-cell stack was fabricated by using the above components and then a maximum power of 7.44 kW for H$_2$/O$_2$ and 5.56 kW for H$_2$/air could be obtained at 70$\^{C}$ and 1 atm. It was seen that the distribution of the OCV for unit cells in the stack was uniform but the voltage deviation increased as the load increased due to the IR drop and the electrode polarization. The stack was applied to the power source of the fuel cell/battery hybrid electric golf car. It produced about 1 kW at a room temperature operation during the test run, which occupied about 43% of the total power required by the 2.3 kW motor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1561-1565
• /
• 2006

The objective of this study was to investigate the anti-oxidative effects of taurine on sperm characteristics for in vitro storage of boar semen. Semen was randomly divided into 10 groups in conical tubes and treated with different concentrations of taurine (25-100 mM) with or without $250{\mu}M$ $H_2O_2$. The percentage of motile spermatozoa in taurine groups after 6 and 9 h were significantly higher at >94% and 87%, respectively, compared to the control group ($85.1{\pm}0.5$ and $72.4{\pm}0.3$, p<0.05). The sperm motility in taurine with $H_2O_2$ after 6 h incubation was slightly decreased compared to the taurine alone treatment, but after 9 and 12 h incubation % sperm motility dropped sharply in taurine with $H_2O_2$ ($75.3{\pm}0.3$ and $69.6{\pm}2.9$, p<0.05). For 3, 9 and 12 h incubation, sperm viability in the control was lower than in taurine groups, irrespective of taurine concentration. In eosin Y and nigrosin staining (ENS), the sperm survival rates (%) for 6 h incubation were significantly higher in 25 mM ($76.0{\pm}0.6$) and 50 mM taurine groups ($78.0{\pm}0.7$), respectively. Sperm survival rates for 9 and 12 h incubation were higher in taurine groups (${\geq}48%$ in 9 h and ${\geq}42%$ in 12 h) compared to controls ($43.0{\pm}2.1$ and $31.0{\pm}0.6$, respectively). In the hyoosmotic swelling test (HOST), sperm membrane integrity was similar to the results of sperm survival. These experiments indicate that supplementation of taurine to the semen extender can increase the sperm characteristics(motility, viability, survival and membrane integrity).

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.619-627
• /
• 2001

n order to increase the virus safety of a human intravenous immunoglobulin (IVIg) that was manufactured by a successive process of cold ethanol fractionation, polyethylene glycol precipitation, and pasteurization ($60^{\circ}C$ heat treatment for 10h), a low pH incubation process (pH 3.9 at $25{\circ}C$ for 14 days) was employed as the final step. The efficacy and mechanism of the fraction III cold ethanol fractionation, pasteurization, and low pH treatment steps in the removal and/or inactivation of blood-borne viruses were closely examined. A variety of experimental model viruses for human pathogenic viruses, including the Bovine herpes virus (BHV), Bovine viral diarrhoea virus (BVDV), Murine encephalomyocarditis virus (EMCV), and Porcine parvovirus (PPV), were selected for this study. The mechanism of reduction for the enveloped viruses (BHV and BVDV) during fraction III fractionation was both inactivation and partitioning, however, it was partitioning in the case of the nonenveloped viruses (EMCV and PPV). The log reduction factors achieved during fraction III fractionation were ${\geqq}$6.7 for BHV, ${\geqq}4.7$ for BVDV, 4.5 for EMCV, and 4.4 for PPV. Pasteurization was found to be a robust and effective step in inactivating all the viruses tested. The log reduction factors achieved during the pasteurization process were ${\geqq}7.5$ for BHV, ${\geqq}4.8$ for BVDV, 3.0 for EMCV, and 3.3 for PPV. A low pH incubation was very effective in inactivating the enveloped viruses as well as EMCV. The log reduction factors achieved during low pH incubation were ${\geqq}7.4$ for BHV, ${\geqq}3.9$ for BVDV, 5.2 for EMCV, and 2.0 for PPV. These results indicate that the low pH treatment successfully improved the viral safety of the final products.