• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.214-217
• /
• 1985

Platinum(II) complexes of R-2,2'-diaminobinaphthyl (R-dabn), [Pt(R-dabn)(H2O)2]Cl2, [Pt(R-dabn)(R-Pn)]Cl2, [Pt(R-dabn)(R-bn)]Cl2, and platinum(II) complexes of S-2,2'-diaminobinaphthyl (S-dabn), [Pt(S-dabn)(H2O)2]Cl2, [Pt(S-dabn)(S-Pn)]Cl2, and [(Pt(S-dabn)(S-bn)]Cl2 have been prepared. (R-Pn and S-Pn are, respectively R- and S isomer of 2,3-diaminobutane). R-Pn and S-bn are, respectively R and S isomer of 2,3-diaminopropane). In the vicinity of the B-absorption band region of dabn, the circular dichroism spectra of platinum(Ⅱ) complexes of R-dabn series show a positive B-band followed by a negative higher energy A-band, which is generally understood as the splitting pattern for a ${\lambda}$ conformation, while the circular dichroism spectra of platinum(Ⅱ) complexes of S-dabn series show a negative B-band followed by a positive higher energy A-band in the long-axis polarized absorption region as expected for a $\delta$ conformation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.11
• /
• pp.1028-1034
• /
• 2005

The objective of this paper is to study the effects of the cooling air mass flow rate and the heat input variation by the simulation and the experiment. An air-cooled $NH_3/H_2O$ absorption chiller is tested in the present study. The nominal cooling capacity of the single effect machine is 17.6 kW (5.0 USRT). The overall conductance (UA) of each component, the cooling capacity, coefficient of performance and each state point are measured with the variation of the cooling air mass flow rate and the heat input. It is found that the COP and cooling capacity increase and then decreases with increasing the heat input. It is also found that the COP and the cooling capacity increase and keep constant with increasing the cooling air mass flow rate. The maximum COP is estimated as 0.51 and the optimum cooling air mass flow rate is $217\;m^3/min$ from the present experiment.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.315-320
• /
• 1989

A method was presented for the analysis of trace metals in iron oxide ore. The method utilized ammonium pyrrolidinedithiocarbamate (APDC)-methyl isobutyl ketone (MIBK) extraction procedure and analysis by atomic absorption spectroscopy (AA). Citrate at pH $8{\sim}10$ for the determination of Co, Ni and Cu or tiron at pH $6{\sim}7$for the determination of Mn and Cu was added as a masking agent to prevent extraction of Fe(III) into the organic phase. Reduction of solubility of MIBK in water was achieved by addition of NaCl as a salting-out agent. Back extraction of the MIBK extracts with aqueous $HNO_3$ was also studied to increase the stability of metal extracts.

• Analytical Science and Technology
• /
• v.10 no.3
• /
• pp.179-186
• /
• 1997

This study was carried out to improve the analytical method for determination of germanium in plants by atomic absorption spectrometry with graphite furnace. For the decomposition of plant samples, the mixed acid of $HNO_3+HClO_4+H_2SO_4$(10 : 4 : 1, v/v) was used. Under this condition, time requirement for the decomposition was 4~5 days and recovery rate was more than 98%. Solution for filling up to constant volume after decomposition was 0.1M acetic acid-sodium acetate. Detection limit for determination of germanium was 0.02 ppm by atomic absorption spectrometry with graphite furnace and argon gas. These results were corresponded with the above-mentioned research projects for improving the determination method of germanium in plants.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.84-89
• /
• 1986

A newflexible $N_2O_2$-type tetradentate ligand. Ethylenediamine-N,N'-di-${\alpha}$-isobutyric acid(eddib), has been synthesized, and dichloro cobalt(III) complex of eddib has been prepared via the air-oxidation technique. Only S-cis isomer has been yielded during the preparation of complex. Ring strain and steric hinderance are cited as the cause for the preference for the S-cis geometric configuration. On series of cobalt(III) complexes of eddib, $[Co(eddib)L]^{n+}$ $(L = Cl{\cdot}(H_2O),\;CO_3^{2-},\;(H_2O)_2)$have been prepared in situ. In their electronic absorption spectra, the absorption maxima and their intensities of the above series of complexes are on the ordinary line of the spectrochemical and hyperchromic series. Elemental analysis, IR, NMR and electronic absorption spectra have been used to characterize the complex and geometries of the complex.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.74-78
• /
• 2015

We measured the low field microwave absorption (LFMA) and ferromagnetic resonance (FMR) signals at various magnetic field angle in exchange biased CoFe/MnIr thin film. The LFMA signals were dominantly related to the magnetization rotation process. In order to analyze the LFMA signal, we calculated transverse magnetization ($M_{\tau}$) and permeability (${\mu}_{\tau}$) for CoFe/MnIr thin film by using S-W model, which magnetic parameters of exchange bias ($H_{ex}$ = 58.5 Oe) and uniaxial anisotropy field ($H_k$ = 30Oe) was obtained from FMR signals. The LFMA signal at hard axis showed similar behavior compared with that of $M_{\tau}$. As the magnetic field angle approach to the perpendicular to hard axis, the LFMA signals were depending on both of $M_{\tau}$ and ${\mu}_{\tau}$.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.612-619
• /
• 2016

In this research, an alumino-borosilicate foamed glass with sound absorption property was prepared using the waste borosilicate glass obtained from the recycling process of waste liquid crystal display (LCD) panel. A 100 g of pulverized waste borosilicate glass with the particle size of under 325 mesh, was mixed with 0.3 g (wt/wt) of graphite, each 1.5 g (wt/wt) of $Na_2CO_3$, $Na_2SO_4$ and $CaCO_3$ as a foaming agent, and 6.0 g (wt/wt) of $H_3BO_3$ and 3.0 g (wt/wt) of $Al_2O_3$ as a pore control agent. Following mixture was under the foaming process for 20 minutes at a foaming temperature of $950^{\circ}C$. The result yielded the foaming agent with 45% of the opened porosity and 0.5-0.7 of the sound absorbing coefficient. This alumino-borosilicate foamed glass with the sound absorption property showed excellent physical and mechanical properties such as density of $0.21g/cm^3$, bending strength of $55N/cm^2$ and compression strength of $298N/cm^2$ which can be ideally used as sound absorption materials with heat-resisting and chemical-resisting property.

• Journal of the Korean Ceramic Society
• /
• v.23 no.6
• /
• pp.45-51
• /
• 1986

$SrTiO_3$ reaction mechanism formed from $TiCl_4$ and $SrCl_2$ solution by direct-wet-process was studied. Through this study it is identified that crystalline $SrTiO_3$ is formed above pH 13.8 amorphous $SrTiO_3$ above pH7 and crystallization temperature of amorphous $SrTiO_3$ is at 37$0^{\circ}C$. the final products are composed of 60% crystalline $SrTiO_3$ and 40% amorphous $SrTiO_3$ The amorphous $SrTiO_3$ is identified with the IR absorption spectrum of Sr-Ti-O by FT-IR spectrometer. Under pH 7 gelationus metatitanate (H2TiO3) is formed from TiCl4 but above pH7 the activity by the formation of metatitnic acid ion $[TiO_3]^{2-}$ is so high that $SrTiO_3$is formed more easily through the reaction with $Sr^{2+}$.

• Journal of Hydrogen and New Energy
• /
• v.9 no.1
• /
• pp.25-30
• /
• 1998

4-probe resistivity measurement technique was used to study kinetics of hydrogen absorption on Pd film ($180{\AA}$ thick) in the ${\alpha}$ phase. Hydrogen gas was introduced to the activated Pd film. For very low hydrogen concentration the following rate law is valid in ${\alpha}$ phase very thin Pd film $$v=k\frac{1}{1+KX{_H}}PH{_2}-k^{\prime}\frac{KX{_H}{^2}}{1+KX{_H}}$$ which is similar to that of bulk. The activation energy of the forward reaction is 4.6kcal/mol H and of the backward reaction 8.4kcal/mol H, which yields the reaction enthalpy -3.8kcal/mol H in the temperature range between 25 and $40^{\circ}C$. The values of activation and enthalpy of thin film are rather smaller than that of bulk sample. This may be due to surface area difference between bulk and film.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.2 s.245
• /
• pp.101-109
• /
• 2006

The narrow band-averaged transmissivity of $CO_2-H_2O$ mixtures is expressed by multiplying the transmissivities of $CO_2\;and\;H_2O$. Applying the multiplication property of narrow band transmissivities for gas mixtures of $CO_2-H_2O$ of the narrow band based WSGGM (weighted sum of gray gases model), the number of gray gases, required for accurate representation of the absorption characteristics by using the narrow band based WSGGM, is significantly increased. To reduce the computational loads by reducing the number of gray gases, we propose a gray gas regrouping process where the gray gases used for .the WSGGM are regrouped into a specified number of groups according to the magnitudes of absorption coefficients. To evaluate the proposed WSGGM for gas mixtures, the radiative transfer problems through 3-dimensional gas media are considered. The radiative source terms and the radiative heat fluxes obtained by using the proposed method are fairly well compared to previous results obtained by using the SNB model and other models. The regrouping technique results in an excellent computational efficiency with minor loss of accuracy.