• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.605-614
• /
• 2005

We show that an Artinian O-sequence $h_0,h_1,{\cdots},h_{d-1},h_d\;=\;h_{d-1},h_{d+l}\;>\;h_d$ of codimension 3 is not level when $h_{d-1}\;=\;h_d\;=\;d + i\;and\;h{d+1}\;=\;d+(i+1)\;for\;i\;=\;1,\;2,\;and\;3$, which is a partial answer to the question in [9]. We also introduce an algorithm for finding noncancelable Betti numbers of minimal free resolutions of all possible Artinian O-sequences based on the theorem of Froberg and Laksov in [2].

• Analytical Science and Technology
• /
• v.18 no.2
• /
• pp.112-119
• /
• 2005

This study reports on the efficiency of cleaning enameled magnet wire using a sulfuric acid $H_2SO_4$ and removal of dissolved organic material using hydrogen peroxide $H_2O_2$ and nitric acid $HNO_3$ at $80^{\circ}C$. The method involves the addition of pure $H_2SO_4$ and $H_2O_2$ or $HNO_3$. Layers of enameled organic material were dissolved by 90% $H_2SO_4$ and the solution was maintained as 35% $H_2O_2$ or 60% $HNO_3$. $H_2O_2$ content in aqueous $H_2O_2$ was maintained as 8.8 : 1.0. An initial concentration of $H_2SO_4$ in dissolution conditions was accomplished within 15 min, with a stripping time of about 2 h. The concentrations of $H_2O_2$ and $HNO_3$ in the processing bath were relatively low, but sufficient enough to produce an effective amount of power in the bath for the removal of the enamel material. The cleaning effect of enameled organic material involves the dehydration by $H_2SO_4$ and the oxidation by $H_2O_2$ or $HNO_3$.

• Journal of the Korean Chemical Society
• /
• v.44 no.2
• /
• pp.120-126
• /
• 2000

The rate constants for the hydrolysis of 2-phenyl-4H,5H-3-methyl-3-thiazolinium perchlorate(PTP) derivatives were detemined by the use of ultraviolet visible spectrophotometer in water. The rate equations which could be applied over a wide pH ranges were obtained. On the basis of rate equation, hydrolysis product analysis, general base catalysis, and substituent effect, a plausible mechanism of the hydrolysis is proposed: Below pH 4.0, the reaction is initiated by addition of water, while above pH 9.0, Michael type nucleophilic addition takes place. In the pH range of $4.5{\sim}8.0$, these two reactions appear to occur competitively.

• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.383-388
• /
• 1982

$Mo_2O_4Cl_2$$(X-py)_4{\cdot}2H_2$O and $(X-pyH)_4$[$Mo_2O_4(NCS)_6)$]${\cdot}H_2$O have been prepared. The infrared, electronic and reflectance spectra, molar conductances and magnetic susceptibility data of complexes are reported. $Mo_2O_4Cl_2$$(X-py)_4{\cdot}2H_2$O (X-py were 3-and 4-cyanopyridine, nicotinamide, 3,5-lutidine and 2-amino-4-picoline) were obtained by hydrolysis of the corresponding substituted pyridinium oxopentachloromolybdates(Ⅴ). Addition of water and substituted pyridines to molybdenum(Ⅴ)-thiocyanate ethylacetate extract yielded brown compounds, $(X-pyH)_4$[$Mo_2O_4(NCS)_6)$]${\cdot}H_2$O where X-py were pyridine, ${\alpha}$, 3-bromopyridine 3,5-lutidine, 3-benzoylpyridine and 4-acetylpyridine. Binuclear, $Mo_2O_4Cl_2(X-py)_4{\cdot}2H_2$ prepared from hydrolysis of $(X-pyH)_2[MoOCl_5]{\cdot}H_2O$ were diamagnetic and nonelectrolytes. The anion of $(X-pyH)_4$[$Mo_2O_4(NCS)_6)$]${\cdot}H_2$O was formulated as dimer and electrolyte.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.59-65
• /
• 1997

Efficient Si(100) etching by thermal H atoms at low substrate temperatures has been achieved. Gas-phase etching product $SiH_4$(g) upon H atom bombardment resulting from direct abstraction of $SiH_3$(a) by impinging H atoms was detected with a quadrupole mass spectrometer over the substrate temperature range of 105-408 K Facile depletion of all surface silyl ($SiH_3$) groups the dissociative adsorption product of disilane ($Si_2H_6$) at 105K from Si(100)2$\times$1 by D atoms and continuous regeneration and removal of $SiD_3$(a) were all consumed. These results provide direct evidence for efficient silicon surface etching by thermal hydrogen bombardment at cryogenic temperatures as low as 105K We attribute the high etching efficiency to the formation and stability of $SiH_3$(a) on Si(100) at lowered surface temperatures allowing the $SiH_3$(a) abstraction reaction by additional H atom to produce $SiH_4$((g).

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.105-115
• /
• 2020

Purpose: This study investigated the position of the hyoid bone and its relationship with airway dimensions in different skeletal malocclusion classes using cone-beam computed tomography (CBCT). Materials and Methods: CBCT scans of 180 participants were categorized based on the A point-nasion-B point angle into class I, class II, and class III malocclusions. Eight linear and 2 angular hyoid parameters(H-C3, H-EB, H-PNS, H-Me, H-X, H-Y, H-[C3-Me], C3-Me, H-S-Ba, and H-N-S) were measured. A 3-dimensional airway model was designed to measure the minimum cross-sectional area, volume, and total and upper airway length. The mean crosssectional area, morphology, and location of the airway were also evaluated. Data were analyzed using analysis of variance and the Pearson correlation test, with P values <0.05 indicating statistical significance. Results: The mean airway volume differed significantly among the malocclusion classes(P<0.05). The smallest and largest volumes were noted in class II (2107.8±844.7 ㎣) and class III (2826.6±2505.3 ㎣), respectively. The means of most hyoid parameters (C3-Me, C3-H, H-Eb, H-Me, H-S-Ba, H-N-S, and H-PNS) differed significantly among the malocclusion classes. In all classes, H-Eb was correlated with the minimum cross-sectional area and airway morphology, and H-PNS was correlated with total airway length. A significant correlation was also noted between H-Y and total airway length in class II and III malocclusions and between H-Y and upper airway length in class I malocclusions. Conclusion: The position of the hyoid bone was associated with airway dimensions and should be considered during orthognathic surgery due to the risk of airway obstruction.

• YAKHAK HOEJI
• /
• v.31 no.1
• /
• pp.14-18
• /
• 1987

2-Substituted-3, 4-dihydro-2H-1, 2-benzothiazin-4-one 1, 1-dioxide 6 was reatced with magnesium methyl carbonate to form magnesium chelate 7, which could be hydrolized in cold hydrochloric acid solution to give 2-substituted-4-hydroxy-2H, 1, 2-benzothiazine-3-Carboxylic acid 1, 1-dioxide 2 in good yield.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.305-310
• /
• 1997

The synthesis and characterization of the platinum heterocyclic carboxaldehyde thiosemicarbazone complexes [NC5H4CRNNC(S)NHR'PtCl] (R=H, R'=CH3(1); R=CH3, R'=CH3(2); R=CH3, R=H(3)) and diphenylphosphinophenyl carboxaldehyde thiosemicarbazone complexes [Ph2PC6H4CHNNC(S)NHRPtCl] (R=CH3(5); R=iC3H7(6); R=Ph(7)) are described. Compounds 1-3 were prepared by reaction of Pt(SEt2)2Cl2 with 2-acetylpyridine-4-alkylthiosemicarbazone in the presence of NEt3. Compounds 5-7 were prepared using Pt(SEt2)2Cl2 in toluene with diphenylphosphinophenyl carboxaldehyde alkylthiosemicarbazone. The compounds have been characterized by microanalysis, NMR (1H, 13C, 31P) spectroscopy, and single-crystal X-ray diffraction. X-ray single crystal diffraction analysis reveals that compound 5 is a mononuclear platinum compound with P,N,S-coordination mode.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2351-2357
• /
• 2011

Three new metal-organic copper(II) complexes, $[Cu(H_2PZTC)_2]_n{\cdot}2nH_2O$ (1), $[Cu(HPZTC){\cdot}2H_2O]_n{\cdot}2nH_2O$ (2), and $Cu_2[(PZHD)(OH)(H_2O)_2]_n$ (3) ($H_3PZTC$ = pyrazine-2,3,5-tricarboxylic acid, $PZHD^{3-}$ = 2-hydroxypyrazine-3,5-dicarboxylate), have been synthesized from $Cu(II)/H_3PZTC$ system under different synthetic conditions, and characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy and thermogravimetric analysis. In complexes 1 and 2, $H_3PZTC$ ligands loose one and two protons, which were transformed into $H_2PZTC^-$ anion and $HPZTC^{2-}$ dianion under different preparation condition, respectively. Furthermore, two ligands coordinate with Cu(II) cations in different modes, leading to the formation of the different chain structures. In complex 3, $H_3PZTC$ ligand was converted into a new ligand-PZHD by in situ decarboxylation and hydroxylation under a higher pH value than that for complexes 1 and 2. PZHD ligands link the Cu(II) cations to form a 2D layer structure. These results demonstrate that the preparation conditions, including pH value and reaction temperature etc, play an important role in the construction of complexes based on $H_3PZTC$ ligand.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.287-287
• /
• 2022

In this study, we analyze RNA-seq data from OxF3Hand WT at several points (Oh, 3 h, 12 h, and 24 h) after WBPH infection. A number of the genes were further validated by RT-qPCR. Results revealed that highest number of DEGs (4,735) between the two genotypes detected after 24 h of infection. Interestingly, many of the DEGs between the WT and OsF3H under control conditions were also found to be differentially expressed in OsF3H in response to WBPH infestation. These results indicate that significant differences in gene expression between the "OxF3H" and "WT" exist as the infection time increases. Many of these DEGs were related to oxidoreductase activity, response to stress, salicylic acid biosynthesis, metabolic process, defense response to pathogen, cellular response to toxic substance, and regulation of hormones level. Moreover, genes involved in salicylic acid (SA) and Ethylene (Et) biosynthesis were upregulated in OxF3H plants while jasmonic acid (JA), Brassinosteroid (Br), and abscisic acid (ABA) signaling pathways were found downregulated in OxF3H plant during WBPH infestation. Interestingly, many DEGs related to pathogenesis such as OsPR1, OsPR1b, NPR1, OsNPR3 and OsNPR5 were found significantly upregulated in OxF3H plants. Additionally, genes related to MAPKs pathway, and about 30 WRKY genes involved in different pathways were found upregulated in OxF3H plants after WBPH infestation. This suggests that overexpression of the OxF3H gene leads to multiple transcriptomic changes and impact plant hormones, pathogenic related and secondary metabolites related genes and enhancing the plant resistance to WBPH infestation.