• 한국식품저장유통학회지
• /
• 제30권2호
• /
• pp.235-246
• /
• 2023

Yellowball (Citrus hybrid cv. Yellowball ) is a new citrus hybrid between Haruka (C. tamurana × natsudaidai ) and Kiyomi (C. unshiu × sinensis) and is known to possess strong antioxidant activity. However, detailed information on the antioxidant components of its peel has not yet been reported. This study evaluated the antioxidant activity of the peel and identified the antioxidant components by fractionating a methanolic extract of Yellowball peels using liquid-liquid extraction with n-hexane, ethyl ether (ether), ethyl acetate (EA), butanol, and water. The phenolic contents and antioxidant activities of the n-hexane, ether, and EA fractions were higher than those of the other fractions, and these fractions were further separated by semi-preparative high-performance liquid chromatography (HPLC). Four antioxidant peaks, EA1, EA2, EA3, and He1, were isolated and analyzed using ultra-performance liquid chromatography-quadrupole-time- of-flight mass spectrometry (UPLC-Q-TOF MS). Sinapoyl glucoside and hesperidin were identified in EA2 and EA3, respectively, and a polymethoxylated flavone (PMF) complex (5-hydroxy-3,6,7,8,3',4'-hexamethoxyflavone, natsudaidain, tetrameth- oxyflavone, and tangeretin) was identified in He1. A compound in EA1 with m/z 223.0246 [M-H] could not be identified and was named unknown2. The antioxidant activity of unknown2 (IC₅₀=69.17 ㎍/mL) was similar to that of Trolox, which was noted as a major antioxidant in Yellowball peel. Further studies on the antioxidant capacity of Yellowball peel are required; however, these results provide a foundation for using Yellowball peel as an antioxidant.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.613-619
• /
• 2005

Indigenous Yakutian cattle' adaptation to the hardest subarctic conditions makes them a valuable genetic resource for cattle breeding in the Siberian area. Since early last century, crossbreeding between native Yakutian cattle and imported Simmental and Kholmogory breeds has been widely adopted. In this study, variations at 22 polymorphic microsatellite loci in 5 populations of Yakutian, Kholmogory, Simmental, Yakutian-Kholmogory and Yakutian-Simmental cattle were analysed to estimate the genetic contribution of Yakutian cattle to the two hybrid populations. Three statistical approaches were used: the weighted least-squares (WLS) method which considers all allele frequencies; a recently developed implementation of a Markov chain Monte Carlo (MCMC) method called likelihood-based estimation of admixture (LEA); and a model-based Bayesian admixture analysis method (STRUCTURE). At population-level admixture analyses, the estimate based on the LEA was consistent with that obtained by the WLS method. Both methods showed that the genetic contribution of the indigenous Yakutian cattle in Yakutian-Kholmogory was small (9.6% by the LEA and 14.2% by the WLS method). In the Yakutian-Simmental population, the genetic contribution of the indigenous Yakutian cattle was considerably higher (62.8% by the LEA and 56.9% by the WLS method). Individual-level admixture analyses using STRUCTURE proved to be more informative than the multidimensional scaling analysis (MDSA) based on individual-based genetic distances. Of the 9 Yakutian-Simmental animals studied, 8 showed admixed origin, whereas of the 14 studied Yakutian-Kholmogory animals only 2 showed Yakutian ancestry (>5%). The mean posterior distributions of individual admixture coefficient (q) varied greatly among the samples in both hybrid populations. This study revealed a minor existing contribution of the Yakutian cattle in the Yakutian-Kholmogory hybrid population, but in the Yakutian-Simmental hybrid population, a major genetic contribution of the Yakutian cattle was seen. The results reflect the different crossbreeding patterns used in the development of the two hybrid populations. Additionally, molecular evidence for differences among individual admixture proportions was seen in both hybrid populations, resulting from the stochastic process in crossing over generations.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.779-783
• /
• 2006

The adiponectin gene is known to be involved in the regulation of energy homeostasis involving food intake, carbohydrate and lipid metabolism. Human adiponectin gene polymorphisms have been recently reported to be associated with obesity, insulin sensitivity and the risk of type 2 diabetes. The present study was carried out to investigate the porcine adiponectin gene as a candidate gene for fat deposition and carcass traits. A mutation of A178G of the porcine adiponectin gene that resulted in substitution of the amino acid Isoleucine to Valine was identified. AcyI PCR-RFLP was used to detect the polymorphism of the genotypes in five different pig populations (Large White, Landrace, Duroc, Chinese breeds Meishan and Qingping). The A allele frequency was significantly higher among subjects from Chinsese lard type breeds, while the G allele was the only one present in those from Western lean type breeds. To determine if there was an association of the polymorphism with phenotypic variation, the mutation was tested in 267 pigs of the "Large $White{\times}Meishan$" F2 resource population. The results of association analyses showed significant associations of the genotypes with fat deposition and carcass traits. Allele G was significantly associated with increase in loin eye height, loin eye area and lean meat percentage and bone percentage, and decrease in fat mean percentage, ratio of lean to fat, shoulder fat thickness, 6-7 rib fat thickness, thorax-waist fat thickness and buttock fat thickness. The substitution of A178G (Ile60Val) happened to be located at amino acid 60 in the collagenous domain of porcine adiponectin which might affect the association into higher-order structures, and accordingly affect the posttranslational modifications and optimal biological activity of the multimeric forms. The identified functional polymorphism provides new evidence of adiponectin as an important candidate gene affecting fat deposition and carcass traits in pigs.

• 한국식품과학회지
• /
• 제42권5호
• /
• pp.549-553
• /
• 2010

본 연구에서는 다양한 효모 배양액을 자가소화 시킨 후 관능검사를 통해 1차적으로 8종(S. cerevisiae 3종, C. utilis 4종 및 Z.rouxii 1종)을 선별하였다. 이 중 정미성과 균체 성장율을 고려하여 C. utilis인 SEM-Y8을 선정하여 고글루타치온 생산을 위한 균주 개량을 수행하였다. 두 번의 UV 처리를 통해 SEM-Y8보다 글루타치온 생성능이 2.0배 증가된 SY8-M2-1 개량 효모 균주를 얻었으며, 선택배지(4.0% yeast extract, 1.5% glucose, 0.04% $NH_4H_2PO_4$, 0.04% L-cystein)를 사용함으로써 글루타치온 함량을 1.5배 더 향상시킬 수 있었다. 이상의 조건에서 얻어진 고글루타치온 함유 효모추출물은 마늘과 양파엑기스보다 우수한 감칠맛과 부드럽고 깊은 맛을 나타내었으며, SEM-Y8 대비 3.2배 향상된 라디컬 소거능을 나타내었다.

• 한국축산식품학회지
• /
• 제26권3호
• /
• pp.402-409
• /
• 2006

Although microorganisms are, in fact, the most diverse and abundant type of organism on Earth, the ecological functions of microbial populations remains poorly understood. A variety of bacteria including marine Vibrios encounter numerous ecological challenges, such as UV light, predation, competition, and seasonal variations in seawater including pH, salinity, nutrient levels, temperature and so forth. In order to survive and proliferate under variable conditions, they have to develop elaborate means of communication to meet the challenges to which they are exposed. In bacteria, a range of biological functions have recently been found to be regulated by a population density-dependent cell-cell signaling mechanism known as quorum-sensing (QS). In other words, bacterial cells sense population density by monitoring the presence of self-produced extracellular autoinducers (AI). N-acylhomoserine lactone (AHL)-dependent quorum-sensing was first discovered in two luminescent marine bacteria, Vibrio fischeri and Vibrio harveyi. The LuxI/R system of V. fischeriis the paradigm of Gram-negative quorum-sensing systems. At high population density, the accumulated signalstrigger the expression of target genes and thereby initiate a new set of biological activities. Several QS systems have been identified so far. Among them, an AHL-dependent QS system has been found to control biofilm formation in several bacterial species, including Pseudomonas aeruginosa, Aeromonas hydrophila, Burkholderia cepacia, and Serratia liquefaciens. Bacterial biofilm is a structured community of bacterial cells enclosed in a self-produced polymeric matrix that adheres to an inert or living surface. Extracellular signal molecules have been implicated in biofilm formation. Agrobacterium tumefaciens strain NT1(traR, tra::lacZ749) and Chromobacterium violaceum strain CV026 are used as biosensors to detect AHL signals. Quorum sensing in lactic acid bacteria involves peptides that are directly sensed by membrane-located histidine kinases, after which the signal is transmitted to an intracellular regulator. In the nisin autoregulation process in Lactococcus lactis, the NisK protein acts as the sensor for nisin, and NisR protein as the response regulator activatingthe transcription of target genes. For control over growth and survival in bacterial communities, various strategies need to be developed by which receptors of the signal molecules are interfered with or the synthesis and release of the molecules is controlled. However, much is still unknown about the metabolic processes involved in such signal transduction and whether or not various foods and food ingredients may affect communication between spoilage or pathogenic bacteria. In five to ten years, we will be able to discover new signal molecules, some of which may have applications in food preservation to inhibit the growth of pathogens on foods.

• Restorative Dentistry and Endodontics
• /
• 제33권6호
• /
• pp.545-552
• /
• 2008

본 연구의 목적은 NaOCl로 처리된 치수강 상아질에 total-etching adhesive system(single bond, 3M-ESPE, St Paul, MN, USA)을 적용할 때 미세인장결합강도에서 sodium ascorbate가 미치는 영향을 평가하는 것이다. 발치된 건전한 인간 대구치의 치수강 내면을 다음과 같이 처리하였다. 1군, 0.9% NaCl로 세척; 2군, 5.25% NaOCl로 세척; 3군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 1분간 적용; 4군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 1분간 적용하고 다시 10ml 물로 수세; 5군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 5분간 적용; 6군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 5분간 적용하고 다시 10ml 물로 수세; 7군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 10분간 적용; 8군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 10분간 적용하고 다시 10ml 물로 수세. 처리된 시편들은 total-etching adhesive system(Single bond)으로 처리한 후 composite resin(Z250)으로 충전하고, 미세인장강도를 측정하기 전 24시 간 동안 보관하였다. 분석 결과 NaOCl 처리 군(2군)은 다른 실험군들에 비해 유의성 있게 낮은 결합 강도를 보였다. NaCl 처리 군(1군)과 sodium ascorbate 처리 군(3-8군)은 유의성 있는 차이가 없었다. 이번 연구 결과는 NaOCl로 처리한 치수강 상아질의 Single bond에 대한 미세인장결합강도는 감소되며, 10% sodium ascorbate를 추가적으로 처리하였을 때 감소된 결합력이 회복됨을 보여주었다. Sodium ascorbate의 다양한 처리시간은 결합력에 영향을 미치지 않았다.

• 한국식품위생안전성학회지
• /
• 제32권4호
• /
• pp.284-289
• /
• 2017

본 연구는 국내 미지정 피막제인 산화형 폴리에틸렌 왁스를 분석하기 위해 다양한 분석방법을 비교, 검토하였으며, 확립된 최적 분석법을 이용하여 시중 유통되는 과일 및 견과류에서 산화형 폴리에틸렌 왁스의 사용여부를 모니터링 하였다. 최적 분석법을 확립하기 위하여 산가, HT-GPC, MALDI-TOF/MS, GC-FID, FT-IR 등을 비교하였다. 산가측정 결과 산화형 폴리에틸렌 왁스를 첨가한 시료와 첨가하지 않은 시료 모두 산가가 1.12 mg KOH/g로 산가의 변화가 나타나지 않아 산가를 이용한 식품 중 산화형 폴리에틸렌 왁스의 분석은 어려울 것으로 판단되었으며, HT-GPC분석은 표준물질의 분산도 값이 약 3.4로 확인되었으며, GPC를 이용한 분석은 실험실간 낮은 재현성과 컬럼 등 분석조건에 따른 결과 값이 달라질 수 있기 때문에 분자량의 분산도만으로 식품 중 산화형 폴리에틸렌 왁스의 분석은 어려울 것으로 판단되었다. MALDI-TOF/MS 분석은 700~2,000 m/z에 peak가 관찰되었지만, 산화형 폴리에틸렌 왁스 성적서에 적혀있는 분자량 범위인 2,700~2,800 m/z와 큰 차이를 보여, MALDI-TOF/MS를 이용한 분석 역시 어려울 것으로 판단되었다. GC-FID를 이용한 지방산 분석결과 산화형 폴리에틸렌 왁스 표준물질에서 과일 및 견과류에서 흔히 볼 수 없는 지방산인 C11:0, C15:1 지방산이 검출되었지만, 제외국 허용기준으로 첨가하여 분석하였을 때 관찰되지 않고, 고농도를 첨가할 경우에만 피크가 관찰되어 GC-FID를 이용한 분석은 어려울 것으로 판단되었다. FT-IR 분석결과 코팅된 견과류 시료와 코팅되지 않은 견과류 시료를 비교하였을 때 코팅된 시료에서 산화형 폴리에틸렌 왁스 표준물질의 spectrum과 일치하는 spectrum을 나타내어, 식품 중 산화형 폴리에틸렌 왁스의 분석은 FT-IR로 분석이 가능함을 확인하였다. 확립된 FT-IR 분석법을 이용하여 국내외 대형마트에서 구입한 111건의 과일 및 견과류를 분석한 결과 산화형 폴리에틸렌 왁스를 사용한 시료가 없음을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제27권2호
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권1호
• /
• pp.31-38
• /
• 2000

This study was conducted to evaluate changes in the lysine to digestible energy (DE) ratio on performance, apparent ileal and fecal nutrient digestibilities as well as blood urea nitrogen (BUN), and to estimate optimal lysine:DE ratios for growing pigs of different sexes. A total of 150 pigs ($(Landrace{\times}Yorkshire){\times}Duroc$, 16.78 kg average body weight, 75 barrows and 75 gilts) was randomly allotted into a $2{\times}3$ (sex by diet) factorial design. Three diets were formulated to contain a crude protein level of 19%, a DE level of 3.5 Mcal/kg with three lysine:DE ratios of 3.2 (low), 3.5 (middle) and 3.8 (high) g lysine/Mcal DE per kg diet for both barrows and gilts throughout the study. With increasing dietary lysine:DE ratio, the average daily gain (ADG) of barrows decreased but there was no significant difference among treatments (p>0.05). However, ADG was significantly higher in gilts fed the diet containing the high lysine:DE ratio (p<0.05), followed by the middle and low lysine:DE ratio dietary groups. No significant effects of lysine:DE ratios on feed intake (ADFI) and feed conversion (F/G) were observed for barrows and gilts during overall period (p>0.05), while the optimal F/G was found in barrows fed diets of low and in gilts fed high lysine:DE ratio. Blood urea nitrogen had a positive relationship with growth rate. The results showed that the optimal lysine:DE ratios were 3.2 and 3.8 g lysine/Mcal DE per kg diet for barrows and gilts of 16 to 57 kg body weight, respectively.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.50-54
• /
• 2003

We have fabricated $∂^2$$B_{z}$ /$∂x^2$ type planar gradiometers and studied their properties in operation under various field conditions. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ (100) substrate by a pulsed laser deposition (PLD) system and patterned into a device by the photolithography with ion milling technique. The device consists of 3 pickup loops designed symmetrically Inner dimension and the width of the square side loops are 3.6 mm and 1.2 mm, respectively, and the corresponding dimensions of the center loop are 2.0 mm and 1.13 mm. The length of baseline gradiometer is 5.8 mm. Step-edge junction width is 3.0 $\mu\textrm{m}$ and the hole size of the SQUID loop is 3 $\mu\textrm{m}$ ${\times}$ 52 $\mu\textrm{m}$. The SQUID inductance is estimated to be 35 pH. The device was formed on a 20 mm ${\times}$ 10 mm substrate. We have tested the behavior of the device in various field conditions. The unshielded gradiometer was stable under extremely hostile conditions on a laboratory bench. Noise level 0.45 pT/$\textrm{cm}^2$/(equation omitted)Hz and 0.84 pT/$\textrm{cm}^2$/(equation omitted)Hz at 1 Hz for the shielded and the unshielded cases, which correspond to equivalent field noises of 150 fT/(equation omitted)Hz and 280 fT/(equation omitted)Hz, respectively. In spite of the short baseline of 5.8 mm, the high common-mode-rejection-ratio of the gradiometer, $10^3$, allowed us to successfully record magnetocardiogram of a human subject, which demonstrates the feasibility of the design in biomagnetic studies.