• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.229-235
• /
• 2000

Soot formation characteristics in counterflow diffusion flames of ethylene/propane/nitrogen mixtures have been studied experimentally to investigate the soot formation mechanism. The effect of HACA reaction on PAH and soot growth has been experimentally investigated by using 2-D planar LII and PAH LIF techniques.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.235-242
• /
• 2010

The purpose of this study was to evaluate tooth whitening and microhardness after treatments with tooth bleaching agents containing dicalcium phosphate dihydrate (DCPD) and 35% hydrogen peroxide (HP) which were used in-office bleaching. Thirty enamel specimens were obtained from human premolars and randomly divided into 3 groups(n=10). Tooth bleaching agents were prepared with DCPD (0 g for controls, 0.1 g and 1 g for experimental groups) and HP solution (35% HP). All groups were applied to enamel surfaces for 60 min for 1 day. The pH of each tooth bleaching agent was measured. Tooth color, microhardness of enamel surfaces were also measured. The tooth bleaching agents containing DCPD showed a significant increase in pH compared to the ones without DCPD(p<0.05). Paired t-tests showed significant difference in color values of enamel before and after bleaching in all the groups(p<0.05). As a result, changes in color, containing DCPD group does not contain a statistically significant difference between groups was observed.(p>0.05). In all groups, tooth hardness after bleaching showed a significant decrease in microhardness (p<0.05). However, the DCPD concentration increased in the bleaching, microhardness values slightly decreased. Based on the above results, tooth bleaching agents containing DCPD and 35%HP were equally effective. Due to increases in pH and effective reduction of tooth surface decalcification, the surface characteristics are exposed to a reduced degree of negative effects, resulting in fewer constituent enamel alterations. Thus, commercial availability of the constituents of tooth whitening materials can be achieved.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.235-242
• /
• 1998

Membrane electrode based on chitin(po1y-[$1{\rightarrow}4$]-${\beta}$-N-acetyl-D-glucosamine) was prepared by mixing uniformly grounded of chitin (100 mesh) with PVC and DOS. We investigated the potential response of chitin membrane electrode to metal ions. It was observed that the response slopes for $Cd^{2+}$(34.9 mV/decade) and $Cu^{2+}$(34.0 mV/decade) were larger than those for other ions in pH 4 acetate buffer. The potentiometric response of chitin electrode to varying pH was nearly constant in the pH range of 2~12.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.235-236
• /
• 1998

The purpose of this paper is to develop diaphragm type pneumatic Left Ventricular Assist Device(LVAD) for clinical application and to evaluate its performance through the mock circulation and animal experiment. The blood housing and diaphragm are made by polyurethane. The relations of cardiac output us. beat rate and cardiac output vs. systolic-to-diastolic rate was estimated through the mock test and hemodynamic waves are recorded for the evaluation of VAD. We performed animal experiment and 4 animals survived more than 24hrs. As a result, the hemodynamic data and waves showed this system can be applicable to the animal experiment.

• Journal of the Korean Society for information Management
• /
• v.11 no.1
• /
• pp.57-79
• /
• 1994

This study investgated citation pattems of publication by researchers in eledncal and electronics engineering in Korea. As sources to derive citation$ Koran Peridcals Index (KPI) and the INSPEC database were seleded, and some 235 articles indexed in KPI and 189 arbcles indexed in INSPEC yielded 3,414 citations. It Identhd the citation behavior of researchers in the field, compared citabn behavior by author affhation (government, universities, and industry/cnmprues), and compared the catation patterns exhibited by articles taken from Kroean and non- Korean publications. Based on the fin-, it was concluded that the citation analysis results could ydd helpful information for the provision of library and information center services and collection development. It a h provided recommendation for the mformation senrim in the field of electrical and electronics engineering.

• Wind and Structures
• /
• v.27 no.4
• /
• pp.235-245
• /
• 2018

In this study the stress analysis of orthotropic thin plate with arbitrary shapes for different boundary conditionsis investigated. Meshfreemethod is applied to static analysis of thin plates with various geometries based on the Kirchhoff classical plate theory. According to the meshfree method the domain of the plates are expressed through a set of nodes without using mesh. In this method, a set of nodes are defined in a standard rectangular domain, then via a third order map, these nodes are transferred to the main domain of the original geometry; therefore the analysis of the plates can be done. Herein, Meshless local Petrov-Galerkin (MLPG) as a meshfree numerical method is utilized. The MLS function in MLPG does not satisfy essential boundary conditions using Delta Kronecker. In the MLPG method, direct interpolation of the boundary conditions can be applied due to constructing node by node of the system equations. The detailed parametric study is conducted, focusing on the arbitrary geometries of the thin plates. Results show that the meshfree method provides better accuracy rather than finite element method. Also, it is found that trend of the figures have good agreement with relevant published papers.

• Journal of the Korean Society of Food Culture
• /
• v.31 no.3
• /
• pp.235-242
• /
• 2016

The purpose of this study was to investigate the quality characteristics of makpyeon prepared with dry milled rice powder. The makpyeon samples prepared with dry milled rice powder and various amount makgeolli (0% (CON), 25% (M25), 50% (M50), 75% (M75), 100% (M100)), and analyzed for moisture content, pH, Hunter's color value, TPA and sensory evaluation. The moisture content did not showed significant difference among makpyeon samples. The L-value, a-value resulted in that CON showed the highest and decreased with the amount of makgeolli. The b-value of makpyeon samples showed that CON was the lowest and increased with the amount of makgeolli. TPA resulted in that M100 showed the highest hardness and the lowest adhesiveness, cohesiveness. Chewiness and gumminess of makpyeon samples were higher than those of CON. Based on quantitative descriptive analysis, the score of brightness, moistness, particle size and gloss of showed higher in CON that in makpyeon samples, firmness increased with the amount of makgeolli. Flavor attributes of liquor odor, sour odor, fermentation odor of makpyeon was stronger in makpyeon samples that in CON with the amount of makgeolli. Acceptance test resulted in makpyeon made with CON, 100% of makgeolli (M100) showed the significantly highest score in taste and overall acceptance.

• Journal of Biosystems Engineering
• /
• v.27 no.3
• /
• pp.235-240
• /
• 2002

Performance of the heat pump with attaching an air heat exchanger was investigated in the heating condition when the air heat exchanger was worked in the ambient air temperature of -5 to 11$\^{C}$ and air flow rate of 542 to 747 ㎡/h. Performance tests for heating condition were conducted in an experimental room equipped with heat pump. The performance tests were performed in a ambient temperature of -4 ∼ 11$\^{C}$, and room temperature of 4∼22$\^{C}$ respectively. Measured data(temperature, capacity of heat transfer and consumption of electronic power) were analyzed to the efficiency of HEEVA(Heat Exchanger fur the Evaporator), overall heat transfer coefficient and COP of heat pump. The results of inlet temperature for evaporator increased that the temperature was 2 ∼6$\^{C}$, and inlet temperature for condenser decreased that the temperature was 3 ∼ 8$\^{C}$. The results of comparing efficiency of HEEVA for the ratio of heat exchange between hot air and cold air showed that efficiency were considered to 91% because of the ratio of 83∼98%. The results of comparing of COP for the heat pump increased that improvement COP was approximately 0.3∼7.5 than HEEVA had not been operated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.235-242
• /
• 1993

In order to investigate the effects of dietary cellulose and protein levels on chick performance, four semi-purified diets were formulated so as to contain cellulose at levels of 5% (LC) and 20% (HC) in combination with 10% (LP) and 20% (HP) protein, and fed ad libitum to 1-week-old White Leghorn male chicks for 3 weeks. There were no significant differences in feed intake, body weight gain and feed efficiency between the LC-HP and HC-HP groups. All parameters were lower in the LP groups; the HC-LP group consumed very small amount of feed and lost body weight during the experiment. The retention rates of DM, ash, nitrogen and energy were higher in the HP than the LP groups. The triglyceride concentration of carcass was lower in the HC-LP group and that of liver was higher in the LC-LP group. The carcass total cholesterol level was higher in the HC-HP group. The relative weight of most digestive organs was higher in the HP group irrespective of the cellulose level. In conclusion, the chick performance was primarily influenced by dietary protein level, and when the chicks were fed inadequate levels of protein, the low cellulose level gave a better performance than the high cellulose level.

• Tribology and Lubricants
• /
• v.29 no.4
• /
• pp.235-241
• /
• 2013

The tribological characteristics of dental metal alloys and zirconia were studied by carrying out a friction and wear performance test. In this study, a pin-on-disk-type tester was used and dead weight was employed as the normal load applied to the test specimen. The friction coefficient of dental metal alloys was investigated in terms of their weight and sliding velocity. Microscopic observations were carried out on worn surfaces of specimens. The results indicated that among all metal alloys, Super-A had the highest friction coefficient. Super-A had the lowest amount of wear among all metal alloys, and the amount of wear increased in the following order: Crown & Bridge, Porcelain, and Partial. Crown & Bridge had the best friction coefficient, but the hardness of Crown & Bridge was lower than that of Porcelain and Partial. Experimental measurement results indicated that the disk weight before and after the experiment was the same.