• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.57-66
• /
• 1993

The p-version crack model based on integrals of Legendre polynomial and virtual crack extension method is proposed with its potential for application to stress intensity factor computations in linear elastic fracture mechanics. The main advantage of this model is that the data preparation effort is minimal because only a small number of elements are used and high accuracy and the rapid convergence can be achieved in the vicinity of crack tip. There are two important findings from this study. Firstly, the limit value, the strain energy of the exact solution, can be estimated with successive three p-version approximations by ascertaining that the approximations enter the asymptotic range. Secondly, the rate of convergence of p-version model is almost twice that of h-version model on the basis of uniform or quasiuniform mesh refinement for the cracked panel problem subjected to tension.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.15-25
• /
• 2003

발생학에서 키메라(chimera)는 2개 이상의 다른 유전자형의 세포, 또는 다른 종의 세포로부터 만들어진 1개의 생물개체를 뜻하는 말로, 이는 초기 수정란의 발달과 포유류의 분화를 연구하는데 이용되고 있다. 키메라를 만드는 방법에는 할구와 내세포괴를 응집시키는 방법과 배반포 내에 여러 종류의 세포를 주입하는 방법이 있다 본 실험에서는 서로 다른 두 가지 방법의 활성화 처리법, 즉, ionomycin 처리 후 Cycloheximide (CHX) 또는 6-Dimetylaminopurine (6-DMAP)에 따른 단위 발생란의 분할과 단계적인 발달율을 살펴 보고자 하였으며, 서로 다른 방법에 의해 생산된 단위발생란 유래의 할구와 체외수정란 유래 할구를 응집하여 키메라 수정란(chimeric embryo)를 만든 후 체외수정란과 발달율을 비교해 보았다. 도축장 유래의 난소에서 난자를 채취하여 체외에서 22~24시간 성숙시킨 후 난구세포를 제거하고 metaphase II 단계의 난자를 5 $\mu$M ionomycin에 4분간 처리한 후, 10 $\mu$g/ml CHX/5 $\mu$g/ml cytochalasin B (CCB)에 5시간 또는 1.9 mM 6-DMAP에 4시간 처리하여 분할율과 배반포기 발달율을 비교 조사하였다. 난자 분할율에서는 체외수정란과 6-DMAP처리 단위 발생란에서 각각가 83.7 와 85.5%로 CHX/CCB 처리 단위발생란의 57.9%보다 유의적으로 높게(P<0.05) 나타났으며, 배반포기 발달율에 있어서는 체외수정란의 발달율이 27.8%로 6-DMAP처리 활성란 12.3%와 CHX/CCB 처리 활성란 5.3%보다 유의적으로 높게 (P<0.05) 나타났다. 키메라 수정란(chimeric embryo)은 서로 다른 두 가지 처리에 의해 생산된 단위발생란의 할구 2개와 체외수정란 유래의 할구 2개를 빈 투명대 내에서 응집시켜 제조하였다 빈 투명대 내에 키메라 수정란(chimeric embryos)의 8 세포기까지의 발달율은, 체외 수정란 할구 2개와 CHX/CCB 처리에 의한 할구 2개를 응집한 그룹은 46.1%, 체외 수정란 할구와 6-DMAP 유래 할구 2개를 응집한 그룹은 52.8% 였으며, handled control은 54.7%로 체외 수정란 77.7%에 비해 유의적으로 낮게(P<0.05) 나타났다. 배반포기까지의 발달율은 체외 수정란과 CHX/CCB에 의해 생산된 키메라 수정란(chimeric embryo)은 12.8%, 체외 수정란과 6-DMAP에 의한 키메라 수정란(chimeric embryo)은 18.8%로 handled control의 21.4%에 비해 유의적으로 낮았으며(P<0.05), 이들 키메라 수정란(chimeric embryos)은 체외 수정란의 34.9%에 비해 유의적으로 낮게(P<0.05)나타났다. 6-DMAP 처리 단위발생이 유기된 수정란 할구 2개와 체외수정란의 할구 2개의 응집에 의한 키메라 수정란(chimeric embryos)의 발달율이 CHX/CCB와 체외수정란의 응집에 의한 키메라 수정란(chimeric embryos)에 비해 다소 높게 나타났으나, 유의적인 차이는 없었다. 본 실험의 결과 서로 다른 방법에 의한 단위 발생란 유래의 할구와 체외 수정란 유래의 할구가 응집에 의한 재조합이 가능하였고 이들을 체외에서 배양하여 배반포기의 수정란까지 발달시켰다.

• Journal of Embryo Transfer
• /
• v.20 no.1
• /
• pp.55-62
• /
• 2005

This study was undertaken to access the effect of collection methods on the collection efficiency, blastocyst rate and pregnancy rate after IVP embryo transfer. The ovaries of Hanwoo were obtained from an abattoir and kept on 25 to $28^{\circ}C$ and transported to laboratory within 4 hrs. The oocytes were collected by aspiration of follicles $(2\~6\;mm)$ with or without slicing of ovaries after aspiration. The oocytes were matured in vitro (IVM) for 20 to 24 hrs in TCM-199 supplemented with $10\%$ fetal bovine serum at $39^{\circ}C$ under $5\%\;CO_{2}$ in air. Following routine IVM/IVF procedure, the oocytes and presumed zygotes were cultured for three day in CRlaa medium with BSA. The cumulus cells at 2 to 8-cell stage of embryos removed then the embryos and were cultured in CRlaa medium containing $10\%$ fetal bovine serum in $5\%\;CO_{2}$ at $39^{\circ}C$. The fresh blastocysts cultured for 7 to 9 days were transferred into recipients. The numbers of oocytes recovered form two different methods, the aspiration and slicing after aspiration, were compared to know what. The number of oocytes per ovary was 8.2 and 6.5 in aspiration combining slicing, and aspiration groups, respectively (p<0.05). The cleavage rate in aspiration method are significantly (p<0.05) high than those in slicing post aspiration $(27.9\%)$, and aspiration $(25.5\%)$. The pregnancy .ate in aspiration method $(62.5\%)$ was high than that in slicing method after aspiration $(54.4\%)$. The pregnancy rates of aspiration method and slicing method after aspiration in nullipara $(58.1\%\;vs\;68.2\%)$ was high than that in pluripara $(49.5\%\;vs\;53.2\%)$. The results obtained that the increased number of oocytes per ovary in slicing method after aspiration could be better than that in aspiration method. Pregnancy rate in aspiration method was slightly higher in than that in slicing method after aspiration.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.3
• /
• pp.175-186
• /
• 1995

The determination of the stress intensity factors is investigated by sur-face integral method around the crack tip of the nlass~vc: concrete structure. The surface integral met hod is naturally derived from the standal-ci path integral J. Howevcr. In the J integral method, pressure in the crack-face and body forces can not be considered, while this theory has advantage of ccmsidering many kind of forces, so t.his theory will be useful in investigating more accurate strt:ss states around crack tip. Furthermore. t h~s rrlethod can elerninate unntussary process of using singular elements and fine mesh around crack tip which is used 11; modelling the singularity around crack tip. A computer program for determming $K_I$, $K_{II}$ is tfcvulopcd by applying this theory. $K_I$, $K_{II}$ values usmg X noded isoparametric elements which was proved and variation of the stress intensity factor was investigated by application of darn structures.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.2
• /
• pp.21-31
• /
• 1999

This paper presents a new possibility of calculating optimal control for large scale which consist of non-linear dynamic sub-systems using two level hierarchical structures method. And the proposed method is based on the idea of block pulse transformation to simplify the algorithm and its calculation. This algorithm used an expansion around the equilibrium point of the system to fix the second and higher order terms. These terms are compensated for iteratively at the second level by providing a prediction for the states and controls which form of a part of the higher order terms. In this new approach the quadratic penalty terms are not used in the cost function. This allows convergence over a longer time horizon and also provides faster convergence. And the method is applied to the problem of optimization of the synchronous machine. Results show that the new approach is superior to conventional numerical method or other previous algorithm.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.385-392
• /
• 2013

The finite element method has become the most widely used method of structural analysis and recently, the method has often been applied to complex dynamic and nonlinear structural analyses problems. Even for these complex problems, where the responses are hard to predict, finite element analyses yield reliable results if appropriate element types and meshes are used. However, the dynamic and nonlinear behaviors of a structure often include large deformations in various portions of the structure and if the same mesh is used throughout the analysis, some elements may deform to shapes beyond the reliable limits; thus dynamically adapting finite element meshes are needed in order for the finite element analyses to be accurate. In addition, to satisfy the users requirement of quick real run time of finite element programs, the algorithms must be computationally efficient. This paper presents an adaptive finite element mesh generation scheme for dynamic analyses of structures that may adapt at each time step. Representative strain values are used for error estimates and combinations of the h-method(node movement) and the r-method(element division) are used for mesh refinements. A coefficient that depends on the shape of an element is used to limit overly distorted elements. A simple frame example shows the accuracy and computational efficiency of the scheme. The aim of the study is to outline the adaptive scheme and to demonstrate the potential use in general finite element analyses of dynamic and nonlinear structural problems commonly encountered.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.49-56
• /
• 2024

An automated dynamic structural analysis module stands as a crucial element within a structural integrated mitigation system. This module must deliver prompt real-time responses to enable timely actions, such as evacuation or warnings, in response to the severity posed by the structural system. The finite element method, a widely adopted approximate structural analysis approach globally, owes its popularity in part to its user-friendly nature. However, the computational efficiency and accuracy of results depend on the user-provided finite element mesh, with the number of elements and their quality playing pivotal roles. This paper introduces a computationally efficient adaptive mesh generation scheme that optimally combines the h-method of node movement and the r-method of element division for mesh refinement. Adaptive mesh generation schemes automatically create finite element meshes, and in this case, representative strain values for a given mesh are employed for error estimates. When applied to dynamic problems analyzed in the time domain, meshes need to be modified at each time step, considering a few hundred or thousand steps. The algorithm's specifics are demonstrated through a standard cantilever beam example subjected to a concentrated load at the free end. Additionally, a portal frame example showcases the generation of various robust meshes. These examples illustrate the adaptive algorithm's capability to produce robust meshes, ensuring reasonable accuracy and efficient computing time. Moreover, the study highlights the potential for the scheme's effective application in complex structural dynamic problems, such as those subjected to seismic or erratic wind loads. It also emphasizes its suitability for general nonlinear analysis problems, establishing the versatility and reliability of the proposed adaptive mesh generation scheme.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.44-51
• /
• 2009

Text understand in natural images has become an active research field in the past few decades. In this paper, we present an automatic recognition system in Korean signboards with a complex background. The proposed algorithm includes detection, binarization and extraction of text for the recognition of shop names. First, we utilize an elaborate detection algorithm to detect possible text region based on edge histogram of vertical and horizontal direction. And detected text region is segmented by clustering method. Second, the text is divided into individual characters based on connected components whose center of mass lie below the center line, which are recognized by using a minimum distance classifier. A shape-based statistical feature is adopted, which is adequate for Korean character recognition. The system has been implemented in a mobile phone and is demonstrated to show acceptable performance.

• Journal of computational fluids engineering
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2000

In general, FDM(finite difference method) and FVM(finite volume method) are used for analyzing the fluid flow numerically. However it is difficult to apply them to problems involving complex geometries, multi-connected domains, and complex boundary conditions. On the contrary, FEM(finite element method) with coordinates transformation for the unstructured grid is effective for the complex geometries. Most of previous studies have used commercial codes such as KIVA or STAR-CD for the flow analyses in the engine cylinder, and these codes are mostly based on the FVM. In the present study, using the FEM for three-dimensional, unsteady, and incompressible Navier-Stokes equation, the velocity and pressure fields in the engine cylinder have been numerically analyzed. As a numerical algorithm, 4-step time-splitting method is used and ALE(arbitrary Lagrangian Eulerian) method is adopted for moving grids. In the Piston-Cylinder, the calculated results show good agreement in comparison with those by the FVM and the experimental results by the LDA.

• KSBB Journal
• /
• v.23 no.3
• /
• pp.257-262
• /
• 2008

In this study, the reaction conditions for lipase-catalyzed resolution of racemic naproxen 2,2,2-trilfluoroethyl thioester were optimized, and the effect of surfactants was investigated. Among the organic solvents tested, the isooctane showed the highest conversion (92.19%) in a hydrolytic reaction of (S)-naproxen 2,2,2-trifluoroethyl thioester. In addition, the isooctane induced the highest initial reaction rate of (S)-naproxen 2,2,2-trifluoroethyl thioester ($V_s=2.34{\times}10^{-2}mM/h$), the highest enantioselectivity (E = 36.12) and the highest specific activity ($V_s/(E_t)=7.80{\times}10^{-4}mmol/h{\cdot}g$) of lipase. Furthermore, reaction conditions such as temperature, concentration of the substrate and enzyme, and agitation speed were optimized using response surface methodology (RSM), and the statistical analysis indicated that the optimal conditions were $48.2^{\circ}C$, 3.51 mM, 30.11 mg/mL and 180 rpm, respectively. When the optimal reaction conditions were used, the conversion of (S)-naproxen 2,2,2-trifluoroethyl thioester was 96.5%, which is similar to the conversion (94.6%) that was predicted by the model. After optimization of reaction conditions, the initial reaction rate, lipase specific activity and conversion of (S)-naproxen 2,2,2-trifluoroethyl thioester increased by approximately 19.54%, 19.12% and 4.05%, respectively. The effect of surfactants such as Triton X-100 and NP-10 was also studied and NP-10 showed the highest conversion (89.43%), final reaction rate of (S)-naproxen 2,2,2-trifluoroethyl thioester ($V_s=1.175{\times}10^{-2}mM/h$) and enantioselectivity (E = 59.24) of lipase.