• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.532-535
• /
• 2004

A method on the determination of Co(II) after adsorbing of Co(II) on 2-mercaptobenzothiazole-loaded silica gel was studied. The conditions on the separation of Co(II) such as pH of solution, the amount of 2-mercaptobenzothiazole, the flow rate for adsorption, and the desorption solvent were optimized to 9.0, 0.05 g, $10mL\;min^{-1}$ and 1 M $HNO_3$ in ethanol, respectively. Under these optimum conditions, the calibration curve of Co(II) was obtained over concentration range of $2{\sim}120ng\;mL^{-1}$. The detection limit was $0.6ng\;mL^{-1}$. Recovery yields of Co(II) in various natural water samples were more than 90%.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.287-294
• /
• 1993

For the purpose of combining the purification processes for several biologically active proteins form human urine, an efficient integrated fractionation procedure has been investigated. The procedure was started by concentration with ultrafiltration and pH precipitation followed by a selectable combination of chromatography on gel filtration, adsorption, ion exchanger, affinity, and reverse phase column. By this process, the purified urokinase, epidermal growth factor and albumin migrated as a single band on SDS-polyacrylamide gel electrophoresis and were fully active. The recoveries of these purified proteins were 48%, 17%, and 46%, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.361-362
• /
• 2005

Antimony doped tin oxide(ATO) nano powders have been synthesized by homogeneous precipitation method using $SnCl_4\cdot5H_2O$ for precursor, $SbCl_3$ as doped material and urea. The hydrolysis of urea and conductive mechanism and Heat treatment was performed at the temperature from $500^{\circ}C$ to $700^{\circ}C$ in air. The ATO nano powders are characterized by means of Thermogravimetry differential thermal analyzer (TG-DTA), X-ray diffraction (XRD), Brunauer, Emmett, and Teller adsorption (BET), Scanning electron microscopy (SEM) ATO nano powders with an average size of nm and the highest surface area 129 $m^2g^{-1}$ are obtained.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.4
• /
• pp.600-614
• /
• 2011

Classical methods which used for removal of heavy metals from contaminated water are adsorption, precipitation, coagulation, ion exchange resin, evaporation, and membrane processes. Microbial biosorption can be used for the removal of contaminated waters with pollutants such as heavy metals and dyes which are not easily biodegradable. Microbial biosorbents are inexpensive, eco friendly and more effective for the removal of toxic metals from aqueous solution. In this review, the bacterial and fungal abilities for heavy metals ions removal are emphasized. Environmental factors which affect biosorption process are also discussed. A detailed description for the most common isotherm and kinetic models are presented. This article reviews the achievements and the current status of bacterial and fungal biosorption technology for heavy metals removal and provides insights for further researches.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.401-406
• /
• 2005

In this paper, both effect of TiN-coating and effect of temperature in TiN-coating by arc ion plating on surface characteristics of TiN coated SKH51 steel are investigated by experiments. Hardness, surface roughness, TiN coating thickness and adsorption force are measured in order to evaluate the effects. For evaluation of the experimental data, the two-way ANOVA method is used. It is concluded that the furnace temperature in the rang of $400^{\circ}C\~500^{\circ}C$ in AIP processing has very little influence on the TiN coating of the SKH51 steels.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.574-582
• /
• 1991

The CO molecules adsorbed on Ni(111) surface is studied in the cluster approximation employing EH method with self-consistent charge iteration. The effect of CO coverage is simulated by allowing the variation of valence state ionization potentials of each Ni atom in model cluster according to the self-consistent charge iteration method. The CO coverage dependent C-O stretching frequency shift, adsorption site conversion, and metal work function change are attributed to the charge transfer between metal surface and adsorbate. For CO/Ni(111) system, net charge transfer from Ni surface to chemisorbed CO molecules makes surface Ni atoms be more positive with increasing coverage, and lowers Ni surface valence band. This leads to a weaker interaction between metal surface valence band and Co $2{\pi}^{\ast}$ MO, less charge transfer to a single CO molecule, and the bule shift of C-O stretching frequency. Further increase of coverage induces the conversion of 3-fold site CO to lower coordination site CO as well as the blue shift of C-O stretching frequency. This whole process is accompanied by the continuous increase of metal work function.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.587-591
• /
• 1999

A molecular dynamics simulation study on the structure and dynamics of Na+ ions in non-rigid dehydrated Na12-A zeolite framework at 298.15 K was conducted using the same method reported in previous studies on rigid and non-rigid Na12-A zeolite frameworks. The agreement between the experimental and calculated results for the zeolite-A framework atoms of structural parameters for non-rigid dehydrated Na12-A zeolite is generally quite good, and for the adsorbed Na+ions the agreement is acceptable. The calculated bond lengths are generally in good agreement with the experimental results and other theoretical data. The calculated IR spectrum by Fourier transform of the total dipole moment autocorrelation function shows two major peaks around 2700 cm-1 and 7000 cm-1. The former appeared in the calculated IR spectra of non-rigid zeolite-A framework only system and the latter remains unexplained except, perhaps, indicating a new formation of a vibrational mode of the framework due to the adsorption of Na+ ions. The peaks above 6200-6800 cm-1 in non-rigid dehydrated Nal2-A zeolite are much larger than those in non-rigid dehydrated H12-A zeolite.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.285-289
• /
• 1992

Enantiomeric separation of underivatized amino acids using N-alkyl-L-proline (octyl, dodecyl or hexadecyl) coated HPLC has been accomplished. The anchoring N-alkyl groups of L-proline provides a permanent adsorption of there solving chiral agent on the hydrophobic interface layer of a reversed phase. The factors controlling retention and enantioselectivity such as the Cu(II) concentration, pH of the eluent, the type and concentration of organic modifier in the hydroorganic eluent, and extent of coating were examined. The elution orders between D- and L-amino acids were consistent, L-forms eluting first, except histidine and asparagine. The extremely high enantioselectivity $(\alpha$ upto 13 for proline) is observed. The retention mechanism for the chiral separation can be illustrated by a complexation and hydrophobic interaction.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.291-296
• /
• 1987

Vibrational spectroscopy has been applied to the benzenethiol molecule adsorbed on the silver surface. The results of infrared and Raman spectral studies have led to the conclusion that benzenethiol is chemisorbed dissociatively on the silver surface by rupture of S-H bond and the benzenethiolate formed upon adsorption is bound to silver via its sulfur atom. It seemed more likely that benzenethiol is adsorbed as being inclined to the silver surface. On contact with oxygen, the geometry of the adsorbed species appeared to bear a resemblance to that of silver benzenethiolate salt. The infrared bands of adsorbed species remained with little decrease of intensity even after the prolonged evacuation at 673 K, indicating that benzenethiol is very strongly chemisorbred to the silver surface.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.5
• /
• pp.366-372
• /
• 1987

Cryptand[2,2] was grafted to low crosslinked styrene-divinylbenzene copolymer by substitution reaction with chloromethylated styrene-divinylbenzene copolymer. This resin was stable in concentrated acid and base, and showed a good resistance to heat. The pH, time, and concentration dependence of the adsorption of metal ions by this resin were studied. Studies on the chromatographic separation of lanthanides, $Cu^{2+}$ and $UO_2^{2+_2}$ were also carried out with various eluents. These studies demonstrate that this resin has the applicability to the preconcentration and separation of metal ions.