• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.525-531
• /
• 2010

To figure out the importance of temperature on electrochemical properties in water environment, calcium carbonate, one of important substances in water chemistry, was chosen to make suspensions. The result of electrokinetic potential of calcium carbonate suspensions revealed that it tended to increase as temperature increased. In addition, electrokinetic potential was negatively increased as suspensions became more basic. Its isoelectric point was ca. 7 regardless of temperature. The adsorption of hydrogen ions on calcium carbonate particles followed endothermic reaction. This result was verified by continuously measuring pH as adding HCl solution in calcium carbonate suspension. It explained that suspensions' potential was determined by DLVO theory which calculated total interaction energy between particles. Suspensions' total interaction energy was proportional to the value of electrokinetic potential. Furthermore, total interaction energy between particles increased as suspensions' temperature was increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.02a
• /
• pp.113-113
• /
• 1995

The adsorpption and decompposition of NO on a stepped ppt(111) surface have been studied using thermal desorpption sppectroscoppy and Auger electron sppectroscoppy. NO adsorbs molecularly in two different states of the terrace and the stepp, which are distinguishable in thermal desorpption sppectra. NO dissociates via a bent sppecies at the stepp sites on the basis of vibrational sppectrum data repported ppreviously. The dissociation of NO is activation pprocess : the activation energy is estimated to be about 2 kcal/mol. Increase in the NO dissociation with adsorpption tempperature is expplained by a pprocess controlled by different of the dissociated atomic nitrogen from the stepp to the terrace of the surface. In addition to No and N2, the desorpption ppeak of N2O is observed. We conclude that the formation of N2O is attributed to surface reaction of No and N adsorbed on the surface.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3274-3280
• /
• 2011

Monodispersed porous NiO and $Co_3O_4$ microcapsules with a hollow core were synthesized using SBA-16 silica sol and PS as a hard template. The porous hollow microcapsules were characterized by XRD, TEM and $N_2$ adsorption/desorption analysis. After $H_2$ reduction of metal oxide microspheres, they were conducted as an active catalyst in the reduction of chiral butylronitrile and cyanobenzene. The mesoporous metals having a hollow structure showed a higher activity than a nonporous metal powder and an impregnated metal on the carbon support.

• 한국생물공학회:학술대회논문집
• /
• 2004.07a
• /
• pp.85-106
• /
• 2004

Styrene as volatile organic compounds(VOC) has come under strict regulatory control as they cause serious health and environmental problems. Biofiltration offers a number of economical and environmental advantages over conventional technologies, such as incineration, catalytic adsorption, and chemical scrubbing. In this presentation, recent progresses on the development of lab-scale biofilter for the treatment of gas-phase styrene are reviewed, The potentials of commercialization of biofilter systems are also discussed.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.15-23
• /
• 1997

The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.362-365
• /
• 2002

토양의 물리/화학적 특성에 따른 토양의 유기오염물 흡착능 변화를 규명하기 위하여, 토양 내 clay 함량 및 유기물 함량변화, 수용액 내 TCE 농도변화에 따른 TCE 의 토양내 흡착량 변화를 측정하였다. 수용액의 pH와 실내온도는 일정하게 유지시켰으며 clay는 표면적이 다른 Ca-montmorillonite, Na-montmorillonite, kaolin을 이용하였고, 유기물질로는 활성탄을 사용하였다. 일정한 토양성분과 실제토양에 대해 수용액 내 TCE의 농도를 변화시켜 농도변화에 따른 흡착량 변화를 측정하였다. 실험결과 유기물과 점토함량의 증가에 따라 흡착량은 모두 증가하였으나 활성탄에 의한 TCE 흡착량이 점토에 비해 매우 높았으므로 유기물에 의한 TCE 흡착영향이 점토에 의한 흡착 영향보다 큰 것으로 나타났다. TCE 농도변화에 따른 흡착결과는 실제토양과 모사토양에서 모두 농도가 증가함에 따라 흡착 증가율이 증가하다가 감소하는 Langmuir isotherm 형태를 보여 주었다.

• Advances in environmental research
• /
• v.6 no.3
• /
• pp.217-227
• /
• 2017

In this study, the elimination of $Ni^{2+}$ using 13X sorbent due to an electrostatic interaction was reported. The significant factors including pH, time and 13X sorbent amount were investigated using Box-Behnken design (BBD). In the optimum experimental conditions, the linear rang and limit of detection of the proposed method were 0.1-20 and $0.102mg\;L^{-1}$, respectively. The precision as RSD% was 1.3% for concentration of $2mg\;L^{-1}$. Concerning the excellent recoveries in a short time with highly efficient sample clean-up and removal, this method may be a very powerful and innovative future sample removal technique. To the best of our knowledge, this is the first report on using BBD for optimizing the parameters affected the removal of $Ni^{2+}$ by 13X zeolite sorbent.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.344-349
• /
• 2009

Optimum dyeing conditions of green tea extracts were investigated toward nylon, cotton, rayon, and tencel fabrics. Affinity of green tea extracts was exhibited much higher onto nylon fabric than the other cellulosics. As for nylon, the adsorption was increased with the increase of dyeing temperature and optimum dyeing pH was around 4~6. Buildup property of green tea extract was good showing a linear relationship between concentration of the extracts and color strength of dyed fabrics within experimental range. Color fastnesses were good to excellent in general except to light.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 1997

Two commercially available lipases, Lipase OF (non-specific lipase from Candida rugosa) and Lipolase 100T (1, 3-specific lipase from Aspergillus niger), were immobilized on insoluble hydrophobic support HDPE (high density polyethylene) by the physical adsorption method. Hydrolysis performance was enhanced by mixing a non-specific Lipase OF and a 1, 3-specific Lipolase 100T at a 2 : 1 ratio. The results also showed that the immobilized lipase maintained its activity at broader temperature ($25~55^{\circ}C$) and pH (4-8) ranges than soluble lipases. In the presence of organic solvent (isooctane), the immobilized lipase retained most of its activity in upto 12 runs of hydrolysis experiment. However, without organic solvent in the reaction mixture, the immobilized lipase maintained most of its activity even after 20 runs of hydrolysis experiment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.76-76
• /
• 2010

The interaction of hydrogen (H) and ZnO surfaces has been investigated using a temperature programmed desorption (TPD) technique. When the surface is exposed to atomic hydrogen below 400 K, hydrogen is adsorbed on the surface. As the hydrogen exposure increases, bulk diffusion of hydrogen takes place. The existence of surface and bulk hydrogen has been confirmed using X-ray photoelectron spectroscopy (XPS). When the ZnO(000-1) surface dosed with hydrogen is heated, surface hydrogen is desorbed at 432 K and bulk hydrogen is evolved at ~539 K. Diffusion of hydrogen into the ZnO bulk is an activated process, and the activation energy is estimated to be 0.19 eV. Diffusion of hydrogen on the ZnO(10-10) surface is also investigated.