• Applied Microscopy
• /
• 제22권2호
• /
• pp.1-14
• /
• 1992

This experiment was performed to study the morphological responses of the parafollicular cells of rat following X-ray irradiation. Male rats were divided into normal and experimental groups. The head and neck region of the rat, under sodium thiopental anesthesia, was exposed to 3,000 rads or 6,000 rads of radiation in a single dose, respectively. The source was a Mitsubishi Linear Accelerator ML-4MV. The target to skin distance was 80 cm, and the dose rate was 200 rads/min. The rate of experimental groups were sacrificed on the 6th hour, 2nd and 6th day after X-ray irradiation. Pieces of the tissue taken from the thyroid gland were fixed in 2.5% glutaraldehyde-1.5% paraformaldehyde (0.1M Millonig's phosphate buffer, pH 7.3), and in 1% osmium tetroxide (0.1M Millonig's phosphate buffer, pH 7.3), and embedded in araldite mixture. The ultrathin sections stained with uranyl acetate and lead citrate were observed with JEM 100 CX-II electron microscope. The results were as follow; 1. Two types of the parafollicular cells, according to their electron densities, were found, i. e., light cells and dark cells. 2. Three types of the parafollicular cells, according to their sizes of secretory granules were found, i.e., small granule cells ($85nm{\pm}20.1;64{\sim}102nm$), medium granule cells ($120nm{\pm}26.5;77{\sim}179nm$), and large granule cells ($165nm{\pm}25.7;128{\sim}189nm$). 3. The differential ultrastructural changes of the cells according to their cell types, i.e., dark and light cell, or small, medium and large granule cells, were hardly observed in the time and dose range covered by this study. 4. The morphological changes of the parafollicular cells were not pronounced after exposure to 3,000 rads of X-ray. 5. Swollen cisternae of the granular endoplasmic reticulum and partial cytolysis were observed after exposure to 6,000 rads of X-ray. 6. Above results suggest that the parafollicular cells showed the alterations of mitochondrial and granular endoplasmic reticular swelling, and partial cytolysis, but only in doses of 6,000 rads.

• 환경영향평가
• /
• 제26권1호
• /
• pp.27-43
• /
• 2017

본 연구는 금강 상류에 위치한 적벽강에서 지역간 주민불편 해소를 위하여 도로 연결노선 건설 및 기반시설확충에 따른 환경영향성을 검토를 위해 2015년 수생태계의 어류 종조성 평가, 멸종위기종 특성, 군집평가 및 일반 수질특성을 분석하였다. 본 사업 구간에서 어류는 총 28종 1186개체가 출현하였고, 법적보호종은 멸종위기 1급인 감돌고기 (Pseudopungtungia nigra) 79개체, II급인 돌상어(Gobiobotia brevibarba)와 꾸구리(Gobiobotia macrocephala)가 각각 5개체, 2개체가 출현하여 종 보존이 필요한 것으로 나타났다. 한편 국내 하천 및 호수에 널리 분포하는 큰입배스(Micropterus salmoides)와 파랑볼우럭(Lepomis macrochirus)의 생태계교란어류는 출현하지 않아 외래어종에 의한 생태계교란 현상은 나타나지 않아 생태계가 잘 보존된 지역으로 분석되었다. 어류군집 평가에 따르면, 전반적으로 종다양도 지수는 모든 지점에서 높게 나타났으며 (범위: 0.788 - 1.030), 우점도 지수는 아주 낮은 것 (범위: 0.097 - 0.183)으로 나타나 특정 종에 의해 우점하지 않고, 군집이 잘 유지되는 것으로 나타났다. 또한 어류의 내성도 및 트로픽 길드 분석 결과 내성종에 비해 민감종의 비율이 상대적으로 높고 잡식종에 비해 충식종의 비율이 상대적으로 높아 어류에 대한 오염도 측면 및 섭식구조에서도 생태계가 잘 유지됨을 나타냈다. 이런 특성은 다변수어류평가모델 (Multi-metric fish model)을 이용한 생태건강도 분석에서 잘 반영되었다. 즉, 어류평가지수 (FAI 모델값)는 82.4으로서, 생태건강도 등급은 "양호상태 (B등급)"로 평가되어 전반적으로 건강한 하천 생태계 특성을 보였다. 또한, 용존산소량(DO)과 수소이온농도(pH)가 각 각 $10mg\;L^{-1}$, pH8 전후로 나타났으며 그 외 일반 이화학적 수질특성에서도 양호하게 나타났으며, 물리적 서식지도 여울과 풀 (Pool)이 잘 조화되는 것으로 나타났다. 이런 지역간 연결도로 건설은 수체내의 토사유입을 가져올 수 있고 이는 서식지 특성 및 어류먹이 연쇄에 직 간접적인 영향 줄 수 있어, 건설 시 토사유출에 대한 대책마련이 필요할 것으로 사료되었다.

• 생태와환경
• /
• 제43권2호
• /
• pp.279-287
• /
• 2010

본 연구는 형산강 수계 6개 지점을 선정하고, 2009년 4월과 9월에 조사를 실시하여 이 화학적 수질, 물리적 서식지 분석을 통하여 어류 분포특성 및 생태 건강도를 진단하였다. 생물통합지수(Index of Biological Integrity, IBI) 모델 분석은 국내 하천의 특성에 맞게 수정 보완하여 8개 다변수 메트릭 모델을 이용하였고, 물리적 서식지 평가지수(Qualitative Habitat Evaluation Index, QHEI)분석은 11개의 다변수 메트릭 모델을 적용하였다. 형산강의 1, 2차 생태 건강도 조사 결과 평균 25.4(n=6)로 "보통상태" (C)로 나타났다. 1차 조사 결과 평균 25로 "보통상태" (C), 2차 조사 결과 평균 25.7로 "보통상태" (C)로 나타났다. 물리적 서식지 평가 결과 최상류 H1에서 150.5로 "양호상태" (B)로 나타났으며, 하류인 H6에서 76으로 "보통상태" (C)로 나타나 하류로 갈수록 감소하는 경향을 보였다. 이 화학적 수질 분석은 형산강 수계의 환경부 수질 측정망 자료 중 2000년부터 2009년까지 10년간의 자료를 이용하여 분석하였다. 형산강의 지난 10년간 평균 BOD 값은 2.4 $mgL^{-1}$ (범위: 0.3~13.8 $mgL^{-1}$)로서 우리나라 수질기준(2010년 1월의 환경부 기준고시)에 의거할 때 II (약간 좋음) 등급을 보였고, COD 역시 큰 변이를 보이며(범위: 0.6~12.8 $mgL^{-1}$), BOD와 유사한 경향을 보였다. TN의 평균값은 3.0 $mgL^{-1}$ (범위: 0.3~10.4 $mgL^{-1}$)이고, TN 역시 형산강이 경주시를 지나면서 TN이 증가한 후 감소하는 경향을 보였다. TP의 평균값은 103.5 ${\mu}gL^{-1}$(범위: 0~606 ${\mu}gL^{-1}$)로 TN과 비슷한 양상을 보였다. SS는 7.5 $mgL^{-1}$ (범위: 0.1~25.2 $mgL^{-1}$)로 하류로 갈수록 증가하는 경향을 보였다. 전체적으로 본류 지점은 하류로 갈수록 건강성이 악화되는 것으로 나타났는데 이는 경주시를 관통하면서 수질이 악화되었고, 생활하수, 산업폐수 및 분뇨처리수가 유입되어 이와 같은 결과가 나타난 것으로 사료되었다.

• 한국환경복원기술학회지
• /
• 제15권4호
• /
• pp.23-40
• /
• 2012

The vascular plants of major sites in Changwon-si were listed 456 taxa (9.3% of all 4,881 taxa of vascular plants); 112 families, 293 genera, 371 species, 2 subspecies, 66 varieties and 17 forms. The vascular plants of Changwon-cheon were listed 133 taxa, Junam reservoir were listed 90 taxa, Seongju-sa were listed 293 taxa, and Yungji park were listed 164 taxa. Divided into 456 taxa; woody plants were 160 taxa (35.1%) and herbaceous plants were 296 taxa (64.9%). Furthermore, therophytes (Th) were 111 taxa (24.3%), hemicryptophytes (H) were 75 taxa (16.4%), megaphanerophytes (MM) were 63 taxa (13.8%) showed high proportional ratio in life form. Based on the list of rare plants by the Korea Forest Service and Korea National Arboretum, 10 taxa (1.8% of all 571 taxa of rare plants); Aristolochia contorta (LC), Euryale ferox (VU), Melothrua japonica (LC), Utricularia pilosa (CR), Hydrocharis dubia (LC), Carex idzuroei (DD), Acorus calamus var. angustatus (LC), etc. Based on the list of endemic plants by the Korea National Arboretum, 10 taxa (3.0% of all 328 taxa of endemic plants); Salix pseudolasiogyne, Philadelphus incanus, Indigofera koreana, Lespedeza ${\times}$ maritima, Stewartia pseudocamellia, Weigela subsessilis, Carex okamotoi, etc. Based on the list of specific plants by floral region were total 43 taxa (4.0% of all 1,071 taxa of specific plants); 4 taxa (Euryale ferox, Hydrocharis dubia, Carex idzuroei, etc.) in class IV, 9 taxa (Ilex crenata, Acer palmatum, Stewartia pseudocamellia, Melothria japonica, Fatsia japonica, etc.) in class III, 3 taxa (Caltha palustris var. membranacea, Nymphoides indica, etc.) in class II, 26 taxa (Cyrtomium fortunei, Chloranthus japonicus, Quercus variabilis, Ulmus parvifolia, Aphananthe aspera, etc.) in class I. Based on the list of naturalized plants, 48 taxa (Rumex crispus, Chenopodium album var. album, Amaranthus patulus, Phytolacca american, Brassica juncea var. integrifolia, Potentilla paradoxa, Robinia pseudoacacia, Euphorbia maculata, Oenothera odorata, Cuscuta pentagona, Veronica persica, Plantago lanceolata, Diodia teres, Helianthus tuberosus, Dactylis glomerata, etc.), naturalization rate was 10.5% of all 456 taxa of vascular plants and urbanization index was 15.0% of all 321 taxa of naturalized plants. Ecosystem disturbing wild plants were 3 taxa (Rumex acetocella, Solanum carolinense, Ambrosia artemisiifolia).

• 한국식품조리과학회지
• /
• 제24권4호
• /
• pp.517-524
• /
• 2008

This study made Soy-Sauce-Kimchi and investigated its pH, acidity, microorganism, salinity, chromaticity, viscosity and taste to revive traditional Soy-Sauce-Kimchi using Soy-Sauce instead of salt and to report its fermentation characteristics. As one of studies on traditional Kimchi, it tried for practical use of traditional Soy-Sauce-Kimchi which had been eaten in the middle region of Korea, especially in Seoul but currently has been prepared by only a few people and has disappeared gradually. According to the results of this study, among three groups of Soy-Sauce-Kimchi-I(s1), Soy- Sauce-Kimchi-II(s2) added by 2.5% sucrose and the control group(C), acidity of s2 was sharply increased after 24 hours and 72 hours at $20^{\circ}C$ and $10^{\circ}C$ respectively and there was few difference in salinity by temperature. In the case of s2 group, addition of 2.5% sucrose was considered to lead to increase of salinity. For chromaticity, while the L value and b value became larger after 48 hours, the a value tended to decline. Viscosity of s2 grew after 24 hours at all of $20^{\circ}C$, $10^{\circ}C$ and $1^{\circ}C$ and that was thought to be because propagation of bacteria such as Leuconostoc mesenteriodes following addition of 2.5% sucrose secreted dextransucrose so sucrose was transferred into dextran to increase viscosity. The total number of microorganisms was recorded to be largest after 48, 36 and 72 hours at $20^{\circ}C$, $10^{\circ}C$ and $1^{\circ}C$ respectively and the number of lactic acid bacteria was the largest at $1^{\circ}C$ after 72 hours compared to those at other temperatures. That was considered to be because microorganisms such as Leuconostoc mesenteriodes are psychrotropic lactic acid bacteria. For sensory evaluation, all appearance, chromaticity and odor of C were higher by $3{\sim}4$ points than those of s1 and s2(p < 0.001) and their feel also showed a similar tendency(p < 0.05). Considering the results of sensory evaluation, more researches were needed to overcome difference of taste for Soy-Sauce-Kimchi according to age due to characteristic flavor and smell of soy-source.

• 한국식품저장유통학회지
• /
• 제21권5호
• /
• pp.757-765
• /
• 2014

국산 캠벨얼리 포도의 자연발효 특성을 알아보는 한편 아황산 처리가 캠벨얼리 와인의 자연발효에 미치는 영향을 조사하였다. 발효 중 가용성 고형분의 함량은 아황산 처리구보다 아황산 무처리구에서 더욱 빠르게 감소하면서 알코올의 함량이 빨리 증가하였다. 그러나 발효 종료 후 알코올의 함량은 모두 유사한 수준으로 나타났다. 효모 생균수는 아황산 무처리구에서 빨리 증가하였으며 아황산 처리구에서는 발효 1일 후 오히려 생균수가 감소하다가 그 이후 급격히 증가하여 발효 7일 후부터는 더욱 높은 수준을 나타내었다. 임의로 분리한 효모의 PCR-RFLP 분석 결과 아황산 무처리구는 4일 후부터 S. cerevisiae가 나타나 5일 후부터 S. cerevisiae가 우점종으로 작용하였으나 아황산 처리구는 발효 1일 후부터 H. uvarum과 S. cerevisiae가 함께 발견되었으며 발효 3일 후부터 S. cerevisiae가 우점종으로 나타났다. 발효 후 여과한 와인의 유기산으로는 사과산, 주석산, 호박산들이 검출되었는데 아황산 처리구에서 사과산과 주석산 함량이 다소 높게 나타났다. 메탄올, 아세트알데히드, 프로판올의 함량은 아황산 처리구에서 다소 높았으나 이소아밀 알코올 함량은 낮았다. 아황산 무처리구의 경우 에틸아세테이트 함량은 375.5 mg/L로서 아황산 처리구보다 약 5.3배로 높았으며 와인의 향과 전반적인 기호도 면에서 높은 점수를 얻었다.

• Ocean Systems Engineering
• /
• 제6권1호
• /
• pp.23-60
• /
• 2016

The major objective of this study was to develop further understanding of 3D nearshore hydrodynamics under a variety of wave and tidal forcing conditions. The main tool used was a comprehensive 3D numerical model - combining the flow module of Delft3D with the WAVE solver of XBeach - of nearshore hydro- and morphodynamics that can simulate flow, sediment transport, and morphological evolution. Surf-swash zone hydrodynamics were modeled using the 3D Navier-Stokes equations, combined with various turbulence models (${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES). Sediment transport and resulting foreshore profile changes were approximated using different sediment transport relations that consider both bed- and suspended-load transport of non-cohesive sediments. The numerical set-up was tested against field data, with good agreement found. Different numerical experiments under a range of bed characteristics and incident wave and tidal conditions were run to test the model's capability to reproduce 3D flow, wave propagation, sediment transport and morphodynamics in the nearshore at the field scale. The results were interpreted according to existing understanding of surf and swash zone processes. Our numerical experiments confirm that the angle between the crest line of the approaching wave and the shoreline defines the direction and strength of the longshore current, while the longshore current velocity varies across the nearshore zone. The model simulates the undertow, hydraulic cell and rip-current patterns generated by radiation stresses and longshore variability in wave heights. Numerical results show that a non-uniform seabed is crucial for generation of rip currents in the nearshore (when bed slope is uniform, rips are not generated). Increasing the wave height increases the peaks of eddy viscosity and TKE (turbulent kinetic energy), while increasing the tidal amplitude reduces these peaks. Wave and tide interaction has most striking effects on the foreshore profile with the formation of the intertidal bar. High values of eddy viscosity, TKE and wave set-up are spread offshore for coarser grain sizes. Beach profile steepness modifies the nearshore circulation pattern, significantly enhancing the vertical component of the flow. The local recirculation within the longshore current in the inshore region causes a transient offshore shift and strengthening of the longshore current. Overall, the analysis shows that, with reasonable hypotheses, it is possible to simulate the nearshore hydrodynamics subjected to oceanic forcing, consistent with existing understanding of this area. Part II of this work presents 3D nearshore morphodynamics induced by the tides and waves.

• 전기화학회지
• /
• 제4권2호
• /
• pp.58-64
• /
• 2001

기체/전해질/LSM $(La_{0.85}Sr_{0.15}MnO_3)$ 공기극이 만나는 삼상계면 (triple phase boundary) 주위에 YSZ ($8mol\%$ yttria stabilized zirconia) 코팅막 (coating film) 을 형성하여 추가로 삼상계면을 크게 늘린 새로운 전극 미세구조를 갖는 복합 공기극 (composite cathode) 을 개발하였다. 이 복합 공기극을 전해질 두께가 약 $30{\mu}m$인 연료극 (anode)v 지지체 위에 형성하여 $700\~800{\circ}C$의 온도에서 전류전압 특성 및 교류 임피던스 분석을 실시하였다. $800^{\circ}$, 공기 및 수소 조건에서 교류 임피던스 분석 결과 1000Hz주파수 영역을 대변하는 저항성분 R1은 연료극 분극 저항에 해당하였고 100Hz주파수 영역의 저항성분 R2는 공기극 분극 저항 성분, 그리고 10Hz이하 영역의 저항성분 R3는 전극을 통한 기체확산 저항성분으로 특히, 작동 조건인 공기 및 수소 분위기에서는 연료극 쪽 반응기체에 의한 기체확산 저항 성분임을 알 수 있었다. 전지성능 측정 결과 이 복합 공기극을 장착한 전지는 $800^{\circ}C$, 공기 및 산소 조건에서 각각 $0.55W/cm^2$ $1W/cm^2$의 높은 전지성능을 나타내었다. 전류전압 곡선은 기울기가 다른 두 구간으로 구분되었으며, 낮은 전류밀도 하에서 보이는 급격한 전압감소 구간은 공기극 분극저항이 주된 성능 저하의 원인인 반면, 높은 전류밀도 하에서 나타나는 완만한 전압 감소 구간은 전해질에 관련된 분극저항이 주된 성능 저하의 원인이었다.

• Tuberculosis and Respiratory Diseases
• /
• 제44권1호
• /
• pp.124-135
• /
• 1997

연구배경 : 미만성 범세기관지염 (Diffuse panbronchiolitis)은 만성 기침, 화농성 객담과 호흡곤란을 주증상으로 하며, 호흡세기관지에 국한된 만성 염증성 질환으로 비교적 근래에 알려진 질환이다. 이 질환은 주로 일본에서 많이 보고되었는데, 우리나라에서 지금까지 발견된 환자의 수는 적으나 최근 수년간 이 질환에 대한 인식이 높아지면서 보고되는 증례가 많아지고 있다. 이 질환은 주로 임삼증상, HRCT 및 조직검사로 진단되는데, 특히 HRCT가 진단에 중요한 비중을 차지하는 것으로 알려져 있다. 하지만 HRCT 소견과 임상소견간에 어떤 상관관계가 있는지에 대해서는 아직 불확실하며, 폐환기주사에서 어떤 특정적인 소견이 나타나는 지에 대해서도 별로 연구된 바가 없다. 방법 : 이에 저자들은 최근 2년동안 미만성 범세기관지염으로 진단된 12명 환자들을 대상으로 임상적 특징을 관찰하고, HRCT 소견과 임상소견과의 상관관계를 관찰하는 한편, 폐환기주사에서 나타나는 특징적인 소견을 분석해 보았다. 결과 : l. 연령은 31-83세(평균 54.4세)에 분포하였고 남녀비는 4:8이었으며, 부비동염이 동반되었던 환자가 9명(75%)였다. 임상적 단계는 임상소견에 따라 3단계로 나누었는데, 각각 l 기(기관지수축과 저산소증)에 속하는 환자는 5명, 2기(기관지수축, 저산소증 및 호흡기 감염증)는 4명, 3기(기관지수축, 저산소증, 고탄산혈증, Pseudomonas에 의한 호흡기 감염증 및 우심부전)는 3명이었다. 2. HRCT 소견에 따라 4기로 나누었는데 l기는 한명도 없었으며, 2기가 4명, 3기가 5명, 4기가 3명으로서, 거의 모든 환자들이 발견 당시에 2기 이상임을 알 수 있었다. 그중 7예에서는 폐환기주사를 실시해 보았는데, 5예 (71.4 %)에서 이행부와 기도 중간부에 비정상적인 연무질침착이 나타나면서 말단 폐실질의 환기 결손소진을 보여서, 만성폐쇄성폐질환과는 대조적인 소견을 나타냈다. 3. 폐기능검사상 l예를 제외한 모든 환자에서 중등도 또는 중중의 폐쇄성 환기장애 소견을 보였고, 산소 투여없이 시행한 동맥혈가스 검사장 10예에서 저산소증, 2예에서 고탄산혈증의 소견을 나타냈다. 객담배양 검사상 P.aeruginosa가 자란 경우가 3예, K.pneumoniae는 2예, H. influenzae는 2예, S. aureus는 2예로 나타났다. 4. HRCT 병기가 높아질수록, 임상적 병기 (r=0.801, P < 0.01) 및 저산소증(r= -0.615, P < 0.05)이 심해지는 양상을 보였으며, ESR(r= 0.818, p < 0.01)도 상승되는 경향을 보였다. 또한 임상적 병기가 높아질수록 저산소증(r = -0.728, p < 0.01) 및 고탄산혈증 (r = 0.620, P < 0.05)이 심해지고, ESR(r= 0.662, p < 0.01)이 증가함을 알 수 있었다. 결론 : 이상의 결과로 보아 미만성 범세기관지염에서 HRCT 소견이 임상소견과도 밀접한 상관관계가 있기 때문에, HRCT는 미만성 범세기관지염의 진단, 중증도의 판정 및 경과 관찰에 유용할 것으로 생각된다. 또한 폐환기주사 역시 미만성 범세기관지염에서 특징적인 소견을 나타내므로, 이를 흉부 HRCT와 함께 병행한다면 미만성 범세기관지염의 진단이 더욱 용이할 것으로 추측되는 바이다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.