• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.99.2-99.2
• /
• 2012

We updated the far-ultraviolet (FUV) spectral images of the entire Vela supernova remnant (SNR) using newly processed FIMS/SPEAR data. In the present study, we compare the newly produced FUV images with the X-ray and $H{\alpha}$ images, and examine how the Vela SNR evolves and interacts with the ambient medium on a global scale. The comparison with X-ray images has revealed a FUV filamentary feature corresponding with the boundary of the northeast-southwest asymmetry of the X-ray shell. The relatively low O IV] ${\lambda}1404$ to O III] ${\lambda}{\lambda}1661$, 1666 ratio estimated on the FUV filament is compatible with the previous proposal that the observed asymmetry of the Vela SNR could be due to the ${\gamma}2$ Velorum stellar wind bubble (SWB). The southwest FUV features surrounding a faint extended X-ray region are characterized as the region where the Vela SNR is interacting slightly stronger with ambient mediums within the dim X-ray southwest section. From a comparison with the $H{\alpha}$ image, we identify a ring-like $H{\alpha}$ feature overlapped with an extended hot X-ray feature of similar size and two local peaks of C IV ${\lambda}{\lambda}1548$, 1551 emission. Their morphologies are consistent with the expected shape when the $H{\alpha}$ ring is in direct contact with the near or far side of the Vela SNR. We suggest that the B3V-type star HD 76161 found at the center of the $H{\alpha}$ ring would be the exciting source of the H II region.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.8 s.227
• /
• pp.921-928
• /
• 2004

Measurements of local heat/mass transfer coefficients in rotating two-pass ducts are presented. Ducts of three different aspect ratios (W/H), 0.5, 1.0 and 2.0, are employed with a fixed hydraulic diameter ($D_h$) of 26.7 nm. $90^{\circ}$-rib turbulators are attached on the leading and trailing walls symmetrically. The rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.056, and the rib pitch-to-rib height ratio (p/e) is 10. The experimental conditions are the same as those of the previous part of the study. As the rib height-to-duct height ratio (e/H) increases, the core flow is more disturbed and accelerated in the midsections of ribs. Therefore, the obtained data show higher heat/mass transfer in the higher aspect ratio duct. Dean vortices also augment heat/mass transfer in the turn and in the upstream region of the second pass. However, the effect becomes less significant for the higher aspect ratio because the surface area increases in the present geometric condition. The effect of rotation produces heat/mass transfer discrepancy.

• The Korean Journal of Pain
• /
• v.10 no.1
• /
• pp.54-57
• /
• 1997

Background : The tonsillar region is innervated by the sensory components of the glossopharyngeal nerve(IX) which communicates with certain part of cervical sympathetic ganglion. Some authors suggest stellate ganglion block(SGB) is effective for treatment of recurrent tonsillitis. The goal of this study was to evaluate the effect of SGB in controlling pain after tonsillectomy. Methods : Forty five patients, evaluated to ASA class 1 and 2, scheduled for tonsillectomy under general anesthesia were randomly assigned to 1 of 3 groups (group I: control; group II: SGB with 1% lidocaine 5 ml; group III: SGB with 2% lidocaine 2.5 ml plus 0.5% bupivacaine 2.5 ml), SGB was performed at the end of surgery. Postoperative pain was assessed with Numeric Rating Scale(NRS) NRS assessment was made 30, 60, 90 min, 2 h, 4 h, 24 h, 48 h after tonsillectomy. Results : Pain scores, after 30 min in group II, III and 60, 90 min in group III were significantly lower than group I(p<0.05). Conclusions : We found SGB was effective in controlling pain after tonsillectomy but further studies are required needs to prolong duration of relief..

• Journal of The Korean Astronomical Society
• /
• v.41 no.6
• /
• pp.157-161
• /
• 2008

We have estimated the fractal dimension of the molecular clouds associated with the Hii region Sh 156 in the Outer Galaxy. We selected the $^{12}CO$ cube data from the FCRAO CO Survey of the Outer Galaxy. Using a developed code within IRAF, we identified slice-clouds (2-dimensional clouds in velocity-channel maps) with two threshold temperatures to estimate the fractal dimension. With the threshold temperatures of 1.8 K, and 3 K, we identified 317 slice-clouds and 217 slice-clouds, respectively. There seems to be a turn-over location in fractional dimension slope around NP (area; number of pixel) = 40. The fractal dimensions was estimated to be D = $1.5\;{\sim}\;1.53$ for $NP\;{\geq}\;40$, where $P\;{\propto}\;A^{D/2}$ (P is perimeter and A is area), which is slightly larger than other results. The sampling rate (spatial resolution) of observed data must be an important parameter when estimating fractal dimension. Fractal dimension is apparently invariant when varying the threshold temperatures applied to slice-clouds identification.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.37.4-38
• /
• 2016

Based on the $850{\mu}m$ dust continuum data from James Clerk Maxwell Telescope (JCMT)/SCUBA-2, we compare overall properties of Planck Galactic Cold Clumps (PGCCs) in the ${\lambda}$ Orionis cloud with PGCCs in other molecular clouds, Orion A and Orion B. The Orion A and Orion B clouds are well known active star-forming region, while, ${\lambda}$ Orionis cloud has a different environment associating with prominent OB associations and a giant H II region. PGCCs in the ${\lambda}$ Orionis cloud have higher dust temperatures (Td~16.08 K) and lower values of dust emissivity (${\beta}{\sim}1.65$) than Orion A and Orion B clouds. In addition, we found the lowest detection rate (16 %, 8 out of 50) of PGCCs at $850{\mu}m$ in the ${\lambda}$ Orionis cloud while among three regions; Orion A and Orion B clouds show much higher detection rates of ~ 76 % (23 out of 30) and 56 % (9 out of 16), respectively. The detected 8 PGCCs in the ${\lambda}$ Orionis cloud have substructures and we identified 15 cores. The cores also show much lower median values of size (~0.08 pc), column density (~ ), number density (~ ), and mass (~ ) compared with other cores in the Orion A and Orion B clouds. These core properties in the ${\lambda}$ Orionis cloud can be attributed to the compression and external heating by the nearby H II region, which may prevent the PGCCs from forming gravitationally bound structures and eventually disperse them. These results well present the negative stellar feedback to core formation.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.71.2-71.2
• /
• 2011

To investigate the properties of the narrow-line regions and the accretion disks of YRGs, we study a sample of 28 young radio galaxies (YRGs) observed with the Kast Double Spectrograph at the Shane 3-m telescope and with the DBSP (Double Spectrograph for the Palomar 200-inch Telescope) at Palomar observatory. In addition we collect an addition sample of 15 YRGs with the optical spectra from the SDSS archive. We present the measured narrow-line region properties based on the various emission line ratios, i.e., [O III]/$H{\beta}$, [N II]/$H{\alpha}$, [S II] 6716/6731, [O I]/[O III], [O II]/[O III] and [Ar III]/[O III], which are useful to constrain the gas properties and the states of the accretion disk. We will discuss the characteristics of YRG.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.121-129
• /
• 1997

Gear train system test rig of power circulating type was fabricated, and systematic experiment for measuring dynamic characteristics of the planetary gear trains in the low speed region has been carried out using the test rig. The measured parameters are fillet strains of the sun gear and ring gear, carrier displacements, torques of the input and output shafts. The results are as follows : i) Even though the loading torque is constant, torque variation has been observed on the input and output hafts, ii) The variation of the torque has two frequency components, i.e. lower one of the input shaft rotation and higher one of the two teeth meshing, iii) The variation of the fillet strains shows the same tendency as that of the torque, iv) The loci of the carrier depend on the torque and rotational speed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.781-789
• /
• 1988

The fatigue crack growth and crack closure behavior of long through-thickness cracks and small half-penny shaped surface cracks were investigated in 5083-H113 Aluminum alloy under constant amplitude testing by the unloading elastic compliance method. It was found that, in the Region II, the crack growth behavior of both through-thickness and surface cracks exhibited the tri-linear form with two transitions and no concern with stress ratio R. In the Region I $I_{ab}$ and I $I_{b}$, through-thickness cracks grew faster than surface cracks in length direction, but at .DELTA. K .leq.4 MPa.root.m for R=0.1 the growth rates of surface cracks in depth direction, grew faster than those of through-thickness cracks. When the crack closure was considered, the growth rates of through-thickness cracks lay between the growth rates of depth direction and the growth rates of length direction in surface cracks. It is suspected that this was caused by the difference of crack closure at depth and length direction of surface cracks.s.

• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.224-227
• /
• 2001

In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range $\Delta K_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - $\Delta$K in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Journal of the Korean association of regional geographers
• /
• v.12 no.4
• /
• pp.461-474
• /
• 2006

This paper aims to analyze regional characteristics of unusual temperature events on summer and winter. The major data used in this study are the daily mean temperature of summer (June-August) and winter (December-February) and wind field on 850 hPa height. Regions of unusual temperature are divided into five regions by the monthly frequency of unusual temperature occurrence. The divided regions are following as: the middle east coastal region (I) where the summer unusual high temperature occurrence frequency is highest; the Gyunggi west coastal and northern middle inland region (II) where winter unusual low temperature occurrence frequency is highest and winter unusual high temperature occurrence frequency is low; the western middle and south region (III) where unusual temperature occurrence ratio is not concentrated on specific season; the forest and southern east region (IV) where unusual high temperature is low; and the south coastal and Jeju island region (V) where winter unusual high temperature is highest.