• 제목/요약/키워드: H/Q ratio

검색결과 167건 처리시간 0.025초

개량형 공압식 가동보의 잠김흐름 특성 분석을 위한 실험연구 (Analysis of submerged flow characteristics of the improved-pneumatic-movable weir through the laboratory experiments)

  • 이경수;장창래;이남주
    • 한국수자원학회논문집
    • /
    • 제49권7호
    • /
    • pp.615-623
    • /
    • 2016
  • 본 연구에서는 개량형 공압식 가동보를 대상으로 가동보의 기립 각도변화에 따른 잠김흐름 특성을 분석하고 유량계수를 산정하였다. 실험결과, 위어마루에서 하류수면까지의 높이와 위어마루에서 상류 수면고 높이의 비($h_t/H$)에 대한 유량감소계수($Q_s/Q_1$)의 변화는 ($h_t/H$가 1에 가까울수록 감소하였다. 따라서 보 하류에서의 수심은 상류보다 작지만 보를 통과하는 흐름으로 인해 하류 유속이 빠르게 나타났으며, 유량이 증가할수록 상 하류 수위차는 감소하는 것으로 나타났다. 또한 같은 유량조건인 경우 하류수두는 L/W가 클수록 크게 증가하였다. 개량형 공압식 가동보의 잠김흐름 유량계수는 가동보의 물리적 제원보다는 상류 접근흐름수두와 상 하류 흐름조건에 의하여 결정되었다.

자유면 대수층 모형에서의 TIME DOMAIN REFLECTOMETRY를 이용한 해수침투 모니터링 (Monitoring of Seawater Intrusion in Unconfined Physical Aquifer Model using Time Domain Reflectometry)

  • 김동주;하헌철;온한상
    • 지질공학
    • /
    • 제13권1호
    • /
    • pp.17-27
    • /
    • 2003
  • 본 연구에서는 해수침투에 관한 기존 이론을 검증하고 지하수 함양량과 양수량의 변화에 따른 담-염수 경계면 이동현상을 고찰하기 위하여 실내 모형규모의 자유면 대수층에서 시간 영역 광전자파 분석기 (Time Domain Reflectometry: TDR)를 이용하여 2차원 염수침투 현상을 관측하였다. 실험 결과 염수와 담수의 경계면에서는 분산 혹은 확산에 의한 혼합대 (mixing zone)가 두텁게 형성되었으며 Badon Ghyben과 Herzberg가 가정한 비혼합 경계면 (sharp interface)은 형성되지 않았다. 따라서 본 연구에서 획득한 기준 해수면에 대한 자유수면($H_{f}$)과 염수 경계면($H_{s}$)까지의 깊이의 비에 관한 실험치와 Ghyben-Herzberg 근사법의 이론치가 일치하지 않음을 알 수 있었다. 한편, 함양량과 양수량을 달리하면서 경계면의 변화를 관찰한 결과 주어진 함양량에 대하여 양수량이 증가함에 따라 경계면의 이동속도가 증가하였고, 본 모형조건하에서 경계면의 이동속도는 함양량에 대한 양수량의 비 ($Q_{p}/Q_{r}$)에 약 7배나 달하는 것으로 나타났으며 이는 해안선에 인접한 해수 침투 취약지역에서는 양수량이 아주 중요한 역할을 한다는 것을 지시한다.

섬광계를 이용한 비균질 도시 지표에서의 현열속 산정 (LAS-Derived Determination of Surface-Layer Sensible Heat Flux over a Heterogeneous Urban Area)

  • 이상현
    • 대기
    • /
    • 제25권2호
    • /
    • pp.193-203
    • /
    • 2015
  • A large aperture scintillometer (LAS) was deployed with an optical path length of 2.1 km to estimate turbulent sensible heat flux (${\mathcal{Q}}_H$) over a highly heterogeneous urban area. Scintillation measurements were conducted during cold season in November and December 2013, and the daytime data of 14 days were used in the analysis after quality control processes. The LAS-derived ${\mathcal{Q}}_H$ show reasonable temporal variation ranging $20{\sim}160W\;m^{-2}$ in unstable atmospheric conditions, and well compare with the measured net radiation. The LAS footprint analysis suggests that ${\mathcal{Q}}_H$ can be relatively high when the newly built-up urban area has high source contribution of the turbulent flux in the study area ('northwesterly winds'). Sensitivity tests show that the LAS-derived ${\mathcal{Q}}_H$ are highly sensitive to non-dimensional similarity function for temperature structure function parameter, but relatively less sensitive to surface aerodynamic parameters and meteorological variables (temperature and wind speed). A lower Bowen ratio also has a significant influence on the flux estimation. Overall uncertainty of the estimated daytime ${\mathcal{Q}}_H$ is expected within about 20% at an upper limit for the analysis data. It is also found that stable atmospheric conditions can be poorly determined when the scintillometry technique is applied over the highly heterogeneous urban area.

합류식 월류수와 분류식 우수유출수의 비점오염물질 유출특성 비교 (Comparison of Characteristics of Nonpoint Source Pollution from Separate and Combined Sewer System)

  • 신민환;전지홍
    • 한국물환경학회지
    • /
    • 제33권1호
    • /
    • pp.97-106
    • /
    • 2017
  • In this study, the characteristics of nonpoint source pollutant loads from separate sewer overflow (SSO) and combined sewer overflow (CSO) were evaluated during 2016 in Namyangju city, Korea. Five rainfall events were monitored during 2016 with ranging from 14.5 mm to 121.5 mm. The runoff ratio of CSO was higher than that of SSO because only design volume of maximum sanitary sewer ($1Q_h$) was transported and treated and $2Q_h$ was overflowed to waterbody during rainy day although combined sewer system was designed to transport $3Q_h$ to treatment system. The event mean concentrations (EMCs) and pollutant loads from CSO were higher than those from SSO. BOD and COD of CSO, and TOC and TN of SSO represented distinct first flush phenomena. The inadequate management in combined sewer system from which the untreated $2Q_h$ from CSO was overflowed to waterbody during rainy day could influence on high pollutant loads and first flushing. Treating $2Q_h$ from CSO, source control such as low impact development, and treating outflow from SSO were strongly recommended to control non-point source pollution in urban area.

핵융합 배가스 중 수소 회수를 위한 촉매반응 특성 연구 (Study on the Characteristics of Catalyst Reaction for Hydrogen Recovery from Nuclear Fusion Exhaust Gas)

  • 정우찬;정필갑;김정원;문흥만
    • 한국수소및신에너지학회논문집
    • /
    • 제26권5호
    • /
    • pp.402-408
    • /
    • 2015
  • In D-T fusion reaction, $D_2$ (duterium) and $T_2$(tritium) are used as fuel gas. The exhaust gas of nuclear fusion includes hydrogen isotopes $Q_2$ (Q means H, D or T), tritiated components ($CQ_4$ and $Q_2O$), CO, $CO_2$, etc. All of hydrogen isotopes should be recovered before released to the atmosphere. This study focused on the recovery of hydrogen isotopes from $CQ_4$ and $Q_2O$. Two kinds of experiments were conducted to investigate the catalytic reaction characteristics of SMR (Steam Methane Reforming) and WGS (Water Gas Shift) reactions using Pt catalyst. First test was performed to convert $CH_4$ into $H_2$ using 6% $CH_4$, 6% CO/Ar feed gas. In the other test, 100% CO gas was used to convert $H_2O$ into $H_2$ at various reaction conditions (reaction temperature, S/C ratio, GHSV). As a result of the first test, $CH_4$ and CO conversion were 41.6%, 57.8% respectively at $600^{\circ}C$, S/C ratio 3, GHSV $2000hr^{-1}$. And CO conversion was 72% at $400^{\circ}C$, S/C ratio 0.95, GHSV $333hr^{-1}$ in the second test.

Control of the VIV of a cantilevered square cylinder with free-end suction

  • Li, Ying;Li, Shiqing;Zeng, Lingwei;Wang, Hanfeng
    • Wind and Structures
    • /
    • 제29권1호
    • /
    • pp.75-84
    • /
    • 2019
  • A steady slot suction near the free-end leading edge of a finite-length square cylinder was used to control its aerodynamic forces and vortex-induced vibration (VIV). The freestream oncoming flow velocity ($U_{\infty}$) was from 3.8 m/s to 12.8 m/s. The width of the tested cylinder d = 40 mm and aspect ratio H/d = 5, where H was the height of the cylinder. The corresponding Reynolds number was from 10,400 to 35,000. The tested suction ratio Q, defined as the ratio of suction velocity ($U_s$) at the slot over the oncoming flow velocity at which the strongest VIV occurs ($U_{\nu}$), ranged from 0 to 3. It was found that the free-end slot suction can effectively attenuate the VIV of a cantilevered square cylinder. In the experiments, the RMS value of the VIV amplitude reduced quickly with Q increasing from 0 to 1, then kept approximately constant for $Q{\geq}1$. The maximum reduction of the VIV occurs at Q = 1, with the vibration amplitude reduced by 92%, relative to the uncontrolled case. Moreover, the overall fluctuation lift of the finite-length square cylinder was also suppressed with the maximum reduction of 87%, which occurred at Q = 1. It was interesting to discover that the free-end shear flow was sensitive to the slot suction near the leading edge. The turbulent kinetic energy (TKE) of the flow over the free end was the highest at Q = 1, which may result in the strongest mixing between the high momentum free-end shear flow and the near wake.

FLDWAV 모형을 이용한 하천합류부에서의 수리학적 특성 연구 (A Study on the Hydraulic Characteristics of River Junctions Using FLDWAV Model)

  • 조현경
    • 한국산업융합학회 논문집
    • /
    • 제10권4호
    • /
    • pp.275-283
    • /
    • 2007
  • This study aims at the calculation of a variation of flow characteristics of main channel for tributary inflow in river junction. So this study was analyzed the variation of flow depth and velocity in main channel for a change of inflow degree. For this purpose, FLDWAV model are carried out for variations of $30^{\circ}$, $60^{\circ}$ and $90^{\circ}$ tributary inflow at junction. Results show that velocity ratio(V1/V3) increases and flow depth ratio(H1/H3) decreases for discharge ratio(Q1/Q3) of upstream and downstream when degree increases in junction. And FLDWAV model was applied at a real river junctions. Selected area is a junction of Gumho river and Sin stream. Results show that pattern is similar to a virtual channel.

  • PDF

산성 전해수가 보리(Hordeum vulgae L.) 엽록체의 발달에 미치는 영향 (The Effects of Acidic Electrolytic Water on the Development of Barley Chloroplast)

  • 정화숙;송승달;노광수;송종석;박강은
    • 한국환경과학회지
    • /
    • 제8권2호
    • /
    • pp.255-261
    • /
    • 1999
  • To investigate the effects of strong acidic electrolytic water on the chloroplast, barley leaves were treated with strong acidic electrolytic water(pH 2.5). And to investigate the effects of weak acidic electrolytic water on the chloroplast development, etiolated barley leaves were treated with weak acidic electrolytic water(pH 6.5) during greening period. Chl contents, Fo, Fv, and Chl fluorescence quenching coefficient in barley leaves were measured during and after treatment of acidic electrolytic water. The following results were obtained. Chl a, b, and carotenoid were decreased with treatment of strong acidic electrolytic water. Chl contents were significantly decreased than that of the control after 5 min. These results provide evidence that the strong acidic electrolytic water dissimilate the Chl and so that the value of Fo was slightly increased. The strong acidic electrolytic water damaged PS II because Fo was increased and Fv, Fm, and Fv/Fm ratio were decreased. qP, qNP and qE were decreased. On the other hand qI was increased than that of the control. But Chl content and Chl fluorescence patterns were a little changed as the pH increase over 4.0 Chl a, b, and carotenoid were increased with treatment of weak acidic electrolytic water during greening period. Chl contents were significantly increased than that of control after 12 hours greening. These results provide evidence that the weak acidic electrolytic water accelerated the chlorophyll synthesis. And the weak acidic electrolytic water accelerated PS II development because Fv, Fm, qP and Fv/Fm ratio were increased than that of the control.

  • PDF

h-index, h-type Indices, and the Role of Corrected Quality Ratio

  • Tahira, Muzammil;Alias, Rose Alinda;Bakri, Arayti;Shabri, Ani
    • Journal of Information Science Theory and Practice
    • /
    • 제2권4호
    • /
    • pp.20-30
    • /
    • 2014
  • This study examines the foremost concerns related to most noted research performance index. The most popular and widely acceptable h-index underestimates the highly visible scientist, the middle order group, due to citation distribution issues. The study addresses this issue and uses 'Corrected Quality Ratio' (CQ) to check the implicit underpinnings as evident in h-index. CQ helps to incorporate the aspects of a good research performance indicator. This simple revision performs more intimately and logically to gauge the broader research impact for all groups and highly visible scientists with less statistical error.

수직평판에 부착된 불연속 열원에 의한 자연대류에서 열원간의 열적 상호간섭에 관한 연구 (Effects of Thermal Interaction on Natural Convection From Discrete Heat Sources Mounted on a Vertical Plate)

  • 박흥수;추홍록;유갑종
    • 태양에너지
    • /
    • 제18권4호
    • /
    • pp.39-47
    • /
    • 1998
  • The natural convection heat transfer in a vertical plate with discrete heat sources was studied experimentally. The particular interest was the thermal interaction of the heat sources. In this study, the radiative and conductive heat transfer were considered as heat loss, Thus, the net convective heat transfer rate was presented as adiabatic temperature and thermal wake function. As a results, for non-uniform heating condition, heat input ratio(q1/q2) was most dominant parameter for the thermal wake function. The convective heat transfer rate is decreased with the increasing of channel ratio. For the range of $7.50{\times}10^5<Rac<8.66{\times}10^6$, a useful correlation was proposed as a function of channel Rayleigh number.

  • PDF