• 한국식품조리과학회지
• /
• 제14권4호
• /
• pp.327-332
• /
• 1998

물비율에 따른 열무 물김치의 발효특성을 조사하기 위해 담금수의 비율을 1/1.14, l/l.5, 1/2, 1/2.75, 1/4로 각각 달리하고 발효숙성 온도를 4$^{\circ}C$, 15$^{\circ}C$, $25^{\circ}C$로 조절하여 열무 물김치를 제조한 후 pH, 산도, 총 비타민C 함량, 미생물균수의 변화를 측정하였고 물비율이 관능적 특성에는 어떠한 영향을 미치는지 함께 살펴보았다. 위의 비율대로 열무 물김치를 제조했을 때, pH와 미생물 변화는 온도별, 시료별로 큰 차이를 보이지 않았고 산도는 온도와 상관없이 물비율이 작을수록 높게 나타났다. 총 비타민 C 함량도 물비율이 작을수록 높음을 알 수 있었다. 관능검사에서는 신냄새, 신맛, 새콤한 맛에서 시료간 차이를 보였는데 각각의 항목에서 물비율 1/1.14 시료가 다른 시료들과 유의적으로 강하게 나타났다. 전반적인 기호도면에서는 유의적인 차이는 없었지만 물비율 1/2가 가장 우수했으며 이어서 l/l.5, l/l.14, 1/2.75, l/4순으로 높게 나타났다. 또한, 총 비타민 C가 김치의 신맛과 풍미와 상관관계가 있음을 알 수 있었다.

• 한국농공학회지
• /
• 제44권3호
• /
• pp.92-100
• /
• 2002

The advent or high-strength steel has enabled the arch structures to be relatively light, durable and long-spanned by reducing the cross sectional area. On the other hand, the possibility of collapse may be increased due to the slender members which may cause the stability problems. The limit analysis to estimate the ultimate load is based on the concept of collapse mechanism that forms the plastic zone through the full transverse sections. So, it is not appropriate to apply it directly to the instability analysis of arch structures that are composed with compressive members. The objective of this study is to evaluate the ultimate load carrying capacity of the parabolic arch by using the elasto-plastic finite element model. As the rise to span ratio (h/L) varies from 0.0 to 0.5 with the increment of 0.05, the ultimate load has been calculated fur arch structures subjected to uniformly distributed vertical loads. Also, the disco-elasto-plastic analysis has been carried out to find the duration time until the behavior of arch begins to show the stable state when the estimated ultimate load is applied. It may be noted that the maximum ultimate lead of the parabolic arch occurs at h/L=0.2, and the appropriate ratio can be recommended between 0.2 and 0.3. Moreover, it is shown that the circular arch may be more suitable when the h/L ratio is less than 0.2, however, the parabolic arch can be suggested when the h/L ratio is greater than 0.3. The ultimate load carrying capacity of parabolic arch can be estimated by the well-known formula of kEI/L$^3$where the values of k have been reported in this study. In addition, there is no general tendency to obtain the duration time of arch structures subjected to the ultimate load in order to reach the steady state. Merely, it is observed that the duration time is the shortest when the h/L ratio is 0.1, and the longest when the h/L ratio is 0.2.

• 생명과학회지
• /
• 제11권2호
• /
• pp.153-158
• /
• 2001

To investigate the effects of soil acidification on growth of Impatiens balsamina L. plants were transplanted to acidified soils with H$_2$SO$_4$ solution. The concentrations of soluble Ca, Mg, K, Al and Mn in the acidified soils increased with increment of H$^{+}$ addition to the soil. In both species, the plant height and root length were inhibited by soil acidification, showing much severer inhibition in Impatiens balsamina L. than in Tagetes patula L., As the soil pH decreases, the growth of underground parts decreased greatly than that of above ground parts in both species. Total dry weight decreased with increased Al concentration as well as lowered soil pH in both plants. There was a strong positive correlation between relative total dry weight and molar (Ca+Mg+K) / Al ratio of the soil. The results suggest that molar(Ca+Mg+K)/ Al ratio of the soil may be useful indicator for assessing the critical load of acid deposition in herb species.s.

• 한국지반공학회논문집
• /
• 제15권5호
• /
• pp.65-80
• /
• 1999

본 논문은 2개 층으로 이루어진 비균질 낙동강 사질토 지반에서 수평하중을 받은 단일 휨성말뚝의 수평거동에 대한 모형실험 결과들을 고찰하였다. 본 연구의 목적은 말뚝의 수평거동 특성에 대한 말뚝두부 구속조건(Free & Fix), 말뚝 근입길이에 대한 하부지반의 두께비(H/L), 그리고 상하부지반의 지반반력계수비$(E_{h1}/E_{h2)$의 영향에 관하여 실험적인 연구를 수행하고 이러한 영향들을 정량화 할 수 있는 실험결과를 얻었다. 모형실험 결과들에 의하면, 비균질 지반에서 수평거동은$(E_{h1}/E_{h2)$에도 의존하는 것으로 나타났다. 수평변위 측면에서의 균질지반에 대한 비균질 지반의 수평변위비$(y_{H/L}/y_{H/L}=0,\; y_{H/L}/y_{H/L}=1.0)$와 말뚝 근입길이에 대한 하부지반의 두께비(H/L)의 관계는 지수 함수식으로 표현되는 실험식을 제안하였다. 또한, 본 연구에서는 최대 휨모멘트 측면에서의 H/L 과 $MBM_{fixed-head}/MBM_{free-head}$관계는 모형실험 결과들로부터 직선함수의 실험식을 제안하였다.

• 천문학논총
• /
• 제32권1호
• /
• pp.189-191
• /
• 2017

We performed systematic observations of the H $\small{I}$ $Br{\alpha}$ line ($4.05{\mu}m$) in 51 nearby (z<0.3) ultraluminous infrared galaxies (ULIRGs), using AKARI near-infrared spectroscopy. The $Br{\alpha}$ line is predicted to be the brightest among the H ${\small{I}}$ recombination lines in ULIRGs with visual extinction higher than 15 mag. We detected the $Br{\alpha}$ line in 33 ULIRGs. In these galaxies, the relative contribution of starburst to the total infrared luminosity ($L_{IR}$) is estimated on the basis of the ratio of the $Br{\alpha}$ line luminosity ($L_{Br{\alpha}}$) to $L_{IR}$. The mean $L_{Br{\alpha}}/L_{IR}$ ratio in LINERs or Seyferts is significantly lower (~50%) than that in H $\small{II}$ galaxies. This result indicates that active galactic nuclei contribute significantly (~50%) to $L_{IR}$ in LINERs, as well as Seyferts. We also estimate the absolute contribution of starburst to $L_{IR}$ using the ratio of star formation rates (SFRs) derived from $L_{Br{\alpha}}$ ($SFR_{Br{\alpha}}$) and those needed to explain $L_{IR}$ ($SFR_{IR}$). The mean $SFR_{Br{\alpha}}/SFR_{IR}$ ratio is only 0.33 even in H $\small{II}$ galaxies, where starburst is supposed to dominate the luminosity. We attribute this apparently low $SFR_{Br{\alpha}}/SFR_{IR}$ ratio to the absorption of ionizing photons by dust within H $\small{II}$ regions.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.207-210
• /
• 2000

P. oleovorans의 유가식 배양에서 탄소원으로 octanoic acid, 질소원으로 $NH_4NO_3$를 이용한 혼합기질을 배양액의 pH 변화에 따라 공급하는 pH-stat 기질공급전략을 개발하였다. 공급기질의 탄소원/질소원 비 (C/N 비)를 변화시킴으로써 최종 균체농도, PHA 농도, PHA 함량 등을 변화시킬 수 있었으며, 최대 균체농도는 C/N 비가 10 (g octanoic acid/g $NH_4NO_3$)일 때 65 g/L, 최대 PHA 농도는 C/N 비가 20일 때 41 g/L, 최대 PHA 함량은 C/N 비가 20일 때 75%였으며 최대 PHA 생산성은 C/N 비가 10일 때 1.03 g/L/h였다.

• 유기물자원화
• /
• 제14권1호
• /
• pp.131-138
• /
• 2006

본 연구는 혐기성 발효를 이용한 수소생산과정에서 pH를 일정하게 유지한 상태에서 안정적인 수소를 생산하기 위한 최적 pH를 찾고자 하였다. 실험결과 pH 6이었을 때 최적의 조건이었으며 이때 수소생산량은 1175.87 mL/L 이고, 이론적 수소 전환율은 22.51 %였다. pH 5는 901.77 mL/L의 수소가 발생되었으며, 수소 전환율은 17.48 %, pH 7은 454.26 mL/L의 수소생산량과 8.74 %의 수소 전환율을 나타내었다. 그리고 pH 7과 8에서는 각각 452.08 mL/L와 82.25 mL/L의 저조한 수소 생산량을 나타내었다. 자당의 혐기성 발효를 통한 유기산 생성에 있어서 pH가 7과 8에서는 propionate가 주로 관찰되었으나 pH가 5와 6인 영역 에서는 butyrate의 생성이 두드러지는 결과가 나타났다.

• Environmental Engineering Research
• /
• 제20권2호
• /
• pp.121-125
• /
• 2015

Biohydrogen production from food waste via dark fermentation was conducted by using mixed culture under various environmental conditions (initial pH, initial F/M ratio, initial ferrous iron ($Fe^{2+}$), and temperature condition) in batch reactor. The results revealed that the maximum hydrogen yield of $46.19mL\;H_2/g\;COD_{add}$ was achieved at the optimal conditions (initial pH 8.0, initial F/M ratio 4.0, initial iron concentration 100 mg $FeSO_4/L$ and thermophilic condition ($55{\pm}1^{\circ}C$)). Furthermore, major volatile fatty acid (VFA) productions of butyrate (765.66 mg/L) and acetate (324.69 mg/L) were detected and COD removal efficiency was detected at 66.00%. Therefore, these optimal conditions could be recommended to operate a system.

• 산업기술연구
• /
• 제22권A호
• /
• pp.185-192
• /
• 2002

The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesive and strength measurement method ignores the effect of stress concentration from shape of specimens. Therefore, this research calculates stress concentration coefficient as the ratio of drilling depth to drilling diameter($h_s/D$), the ratio of overlay thickness to drilling diameter($h_0/D$), the ratio of steel disk thickness to drilling diameter(t/D), the ratio of overlay elastic modulus to substrate modulus($E_1/E_0$), the distance from core to corner border(L_$_{corner}$) and the distance between cores(L_$_{coic}$) vary. The finite element method is adapted to analysis The results from 'the F.E.M analysis are as follows. The stress concentration effects can be minimized when the ratio of drilling depth to drilling diameter($h_s/D$) is 0.20~0.25, the elastic modulus ratio($E_1/E_0$) is 06~1.0, and the ratio of steel disk thickness to drilling diameter(t/D) is 3.0. The overlay thickness, the distance from specimens to corner border(L_$_{corner}$), the distance between cores(L_$_{coic}$) almost do not affect to the stress concentration.

• 한국분무공학회지
• /
• 제16권4호
• /
• pp.167-175
• /
• 2011

The HCCI engines have been known with high efficiency and low pollution and can be actualized as the new internal combustion engines. However, As for(??) the ignition and combustion depend strongly on the oxidation reaction of the fuel, so it is difficult to control auto-ignition timing and combustion duration. Purpose of this paper is creating the database for development of multi-dimensional simulation and investigating the influence of different molecular structure. In this research, the effect of n-heptane mole ratio in fuel (XnH) on the ignition delay from homogeneous charge compression ignition(HCCI) has been investigated experimentally. By varying the XnH, it was possible to ascertain whether or not XnH is the main resource of ignition delay. Additionally, the information on equivalence ratio for varying XnH was obtained. The tests were performed on a RCM (Rapid Compression Machine) fueled with n-heptane and iso-octane. The results showed that decreasing XnH (100, 30, 20, 10,0), the ignition delays of low temperature reaction (tL) and high temperature reaction (tH) is longer. And the temperature of reaction increases by about 30K. n-heptane partial equivalence ratio (fnH) affect on tL.and TL. When ${\phi}$nH was increased as a certain value, tL was decreased and TL was increased.