• Title/Summary/Keyword: H/L ratio

Search Result 2,116, Processing Time 0.038 seconds

Fermentation Properties of Yulmoo Mulkimchi According to the Ratio of Water to Yulmoo (물비율을 달리한 열무 물김치의 발효특성)

  • 최성유;오지영;유정화;한영숙
    • Korean journal of food and cookery science
    • /
    • v.14 no.4
    • /
    • pp.327-332
    • /
    • 1998
  • In the fermentation of Yulmoo Mulkimchi, various ratios of Yulmoo to water (l/l.14, l/l.5, 1/2, l/2.75, 1/4) were prepared and fermented at 4$^{\circ}C$, 15$^{\circ}C$, 25$^{\circ}C$ for up to 10 days. According to the fermentation time, the pH, acidity, total vitamin C content and microbial growth in Mulkimchi samples were determined together with sensory evaluation. Fermentation temperature on water addition ratio didn't show any difference in pH and microbial growth of Mulkimchi. However, low ratio of water resulted in high acidity and vitamin C content in Mulkimchi. In terms of acid odor and acid taste, the least water addition (l/l.4) sample was significantly strong than those of other samples. The ratio of Yulmoo to water, l/2 showed the highest overall sensorial acceptability and followed by l/l.5, l/l.4, l/2.75 and 1/4 samples. It was found that the content of vitamin C and acid taste of Mulkimchi have correlation with its acceptability.

  • PDF

The Ultimate Load Capacity of the Parabolic Arches by Elasto-Plastic Model (탄소성 모델에 의한 포물선 아치의 극한 내하력 평가)

  • 조진구;박근수
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.44 no.3
    • /
    • pp.92-100
    • /
    • 2002
  • The advent or high-strength steel has enabled the arch structures to be relatively light, durable and long-spanned by reducing the cross sectional area. On the other hand, the possibility of collapse may be increased due to the slender members which may cause the stability problems. The limit analysis to estimate the ultimate load is based on the concept of collapse mechanism that forms the plastic zone through the full transverse sections. So, it is not appropriate to apply it directly to the instability analysis of arch structures that are composed with compressive members. The objective of this study is to evaluate the ultimate load carrying capacity of the parabolic arch by using the elasto-plastic finite element model. As the rise to span ratio (h/L) varies from 0.0 to 0.5 with the increment of 0.05, the ultimate load has been calculated fur arch structures subjected to uniformly distributed vertical loads. Also, the disco-elasto-plastic analysis has been carried out to find the duration time until the behavior of arch begins to show the stable state when the estimated ultimate load is applied. It may be noted that the maximum ultimate lead of the parabolic arch occurs at h/L=0.2, and the appropriate ratio can be recommended between 0.2 and 0.3. Moreover, it is shown that the circular arch may be more suitable when the h/L ratio is less than 0.2, however, the parabolic arch can be suggested when the h/L ratio is greater than 0.3. The ultimate load carrying capacity of parabolic arch can be estimated by the well-known formula of kEI/L$^3$where the values of k have been reported in this study. In addition, there is no general tendency to obtain the duration time of arch structures subjected to the ultimate load in order to reach the steady state. Merely, it is observed that the duration time is the shortest when the h/L ratio is 0.1, and the longest when the h/L ratio is 0.2.

Effects of Soil Acidification on Growth of Impatiens balsamina L. and Tagetes patula L. Plants (토양산성화가 봉선화(Impatiens balsamina L.) 및 만수국(Tagetes patula L.)의 생장에 미치는 영향)

  • 김학윤
    • Journal of Life Science
    • /
    • v.11 no.2
    • /
    • pp.153-158
    • /
    • 2001
  • To investigate the effects of soil acidification on growth of Impatiens balsamina L. plants were transplanted to acidified soils with H$_2$SO$_4$ solution. The concentrations of soluble Ca, Mg, K, Al and Mn in the acidified soils increased with increment of H$^{+}$ addition to the soil. In both species, the plant height and root length were inhibited by soil acidification, showing much severer inhibition in Impatiens balsamina L. than in Tagetes patula L., As the soil pH decreases, the growth of underground parts decreased greatly than that of above ground parts in both species. Total dry weight decreased with increased Al concentration as well as lowered soil pH in both plants. There was a strong positive correlation between relative total dry weight and molar (Ca+Mg+K) / Al ratio of the soil. The results suggest that molar(Ca+Mg+K)/ Al ratio of the soil may be useful indicator for assessing the critical load of acid deposition in herb species.s.

  • PDF

Effect of Pile Head Constraint on Lateral Behavior of Single Flexible Pile in Non-homogeneous Sand (비균질 사질토 지반에서 단일 휨성말뚝의 수평거동에 대한 말뚝 두부 구속효과 연구)

  • 김병탁;김영수;정성관
    • Journal of the Korean Geotechnical Society
    • /
    • v.15 no.5
    • /
    • pp.65-80
    • /
    • 1999
  • This paper shows the results of a series of model tests on the behavior of single flexible pile, which is subjected to lateral load, in non-homogeneous Nak-Dong River sands, consisting of two layers. The purpose of the present paper is to investigate the effects of ratio of lower layer thickness to embedded pile length, ratio of soil modulus of upper layer to lower one, and pile head constraint condition on the characteristics of lateral behavior of single pile. These effects can be quantified only by the results of model tests. Based on the results of model tests, in non-homogeneous sand, it was found that the lateral behavior depends upon the ratio of soil modulus of upper layer to lower one. And, in respect of deflection, it was found that the relationship between the deflection ratio of non-homogeneous to homogeneous sand and the ratio of lower layer thickness to embedded pile length can be fitted to exponential function of H/L and lateral load by model tests results. Also, in respect of maximum bending moment, it was found that the relationship H/L and $MBM_{fixed-head}/MBM_{free-head}$ can be fitted to linear function of H/L by model test results.

  • PDF

PROBING STAR FORMATION IN ULTRALUMINOUS INFRARED GALAXIES USING AKARI NEAR-INFRARED SPECTROSCOPY

  • Yano, Kenichi;Nakagawa, Takao;Isobe, Naoki;Shirahata, Mai
    • Publications of The Korean Astronomical Society
    • /
    • v.32 no.1
    • /
    • pp.189-191
    • /
    • 2017
  • We performed systematic observations of the H $\small{I}$ $Br{\alpha}$ line ($4.05{\mu}m$) in 51 nearby (z<0.3) ultraluminous infrared galaxies (ULIRGs), using AKARI near-infrared spectroscopy. The $Br{\alpha}$ line is predicted to be the brightest among the H ${\small{I}}$ recombination lines in ULIRGs with visual extinction higher than 15 mag. We detected the $Br{\alpha}$ line in 33 ULIRGs. In these galaxies, the relative contribution of starburst to the total infrared luminosity ($L_{IR}$) is estimated on the basis of the ratio of the $Br{\alpha}$ line luminosity ($L_{Br{\alpha}}$) to $L_{IR}$. The mean $L_{Br{\alpha}}/L_{IR}$ ratio in LINERs or Seyferts is significantly lower (~50%) than that in H $\small{II}$ galaxies. This result indicates that active galactic nuclei contribute significantly (~50%) to $L_{IR}$ in LINERs, as well as Seyferts. We also estimate the absolute contribution of starburst to $L_{IR}$ using the ratio of star formation rates (SFRs) derived from $L_{Br{\alpha}}$ ($SFR_{Br{\alpha}}$) and those needed to explain $L_{IR}$ ($SFR_{IR}$). The mean $SFR_{Br{\alpha}}/SFR_{IR}$ ratio is only 0.33 even in H $\small{II}$ galaxies, where starburst is supposed to dominate the luminosity. We attribute this apparently low $SFR_{Br{\alpha}}/SFR_{IR}$ ratio to the absorption of ionizing photons by dust within H $\small{II}$ regions.

Pseudomonas oleovorans의 유가식 배양에 의한 medium chain length Polyhydroxyalkanoates (MCL-PHA) 생산

  • Kim, Beom-Su;Im, Hui-Yeon
    • 한국생물공학회:학술대회논문집
    • /
    • 2000.04a
    • /
    • pp.207-210
    • /
    • 2000
  • Pseudomonas oleovorans was cultivated to produce medium chain length polyhydroxyalkanoates (MCL-PHA) fram octanoic acid and ammonium nitrate as carbon and nitrogen source, respectively, by a pH-stat fed-batch culture technique. The octanoate concentration of the culture broth was maintained below 4 g/L by feeding the mixture of octanoic acid and ammonium nitrate when the culture pH rose above high limit. The effect of the ratio of octanoic acid to ammonium nitrate (C/N ratio) in the feed on the PHA production was examined. The final cell concentrations of 62.5, 54.7, and 9.5 g/L, PHA contents of 62.9, 75.1, and 67.6% of dry cell weight, and productivities of 1.03, 0.632, and 0.161 g/L/h were obtained when the C/N ratio in the feed were 10, 20, and 100 g octanoic acid/g ammonium nitrate, respectively.

  • PDF

A Study of Biological Hydrogen Gas Production under Anaerobic Fermentation (혐기성 발효에 의한 생물학적 수소생산에 관한 연구)

  • Yoon, Woo-Hyun;Kim, Hyun-Kab;Lee, Tae-Jin
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.14 no.1
    • /
    • pp.131-138
    • /
    • 2006
  • In this study, the optimum condition of pH was investigated on the hydrogen gas production under anaerobic fermentation process. The results of the experiment showed that the optimum condition was observed at pH 6, resulting in 1175.87 mL/L of hydrogen gas production rate and 22.51% theoretical hydrogen conversion ratio. Hydrogen gas production rate and theoretical hydrogen conversion ratio were 901.77 mL/L and 17.48 % respectively at pH 5. At pH 7 and 8, the production rate of hydrogen gas was little low as 82.15 mL/L. Among the organic acids from the sucrose fermentation, propionate was observed as the dominant acid at pH 7 and 8 but butyrate was the dominant at pH 5 and 6.

  • PDF

Optimal conditions for biological hydrogen production from food waste

  • Wongthanate, Jaruwan;Chinnacotpong, Kittibodee
    • Environmental Engineering Research
    • /
    • v.20 no.2
    • /
    • pp.121-125
    • /
    • 2015
  • Biohydrogen production from food waste via dark fermentation was conducted by using mixed culture under various environmental conditions (initial pH, initial F/M ratio, initial ferrous iron ($Fe^{2+}$), and temperature condition) in batch reactor. The results revealed that the maximum hydrogen yield of $46.19mL\;H_2/g\;COD_{add}$ was achieved at the optimal conditions (initial pH 8.0, initial F/M ratio 4.0, initial iron concentration 100 mg $FeSO_4/L$ and thermophilic condition ($55{\pm}1^{\circ}C$)). Furthermore, major volatile fatty acid (VFA) productions of butyrate (765.66 mg/L) and acetate (324.69 mg/L) were detected and COD removal efficiency was detected at 66.00%. Therefore, these optimal conditions could be recommended to operate a system.

Measurement Conditions of Concrete Pull-off Test in Field from Finite Element Analysis (유한요소 해석을 이용한 현장 콘크리트 부착강도 측정조건)

  • Kim, Seong-Hwan;Jeong, Won-Kyong;Kwon, Hyuck;Kim, Hyoun-Oh;Lee, Bong-Hak
    • Journal of Industrial Technology
    • /
    • v.22 no.A
    • /
    • pp.185-192
    • /
    • 2002
  • The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesive and strength measurement method ignores the effect of stress concentration from shape of specimens. Therefore, this research calculates stress concentration coefficient as the ratio of drilling depth to drilling diameter($h_s/D$), the ratio of overlay thickness to drilling diameter($h_0/D$), the ratio of steel disk thickness to drilling diameter(t/D), the ratio of overlay elastic modulus to substrate modulus($E_1/E_0$), the distance from core to corner border(L_$_{corner}$) and the distance between cores(L_$_{coic}$) vary. The finite element method is adapted to analysis The results from 'the F.E.M analysis are as follows. The stress concentration effects can be minimized when the ratio of drilling depth to drilling diameter($h_s/D$) is 0.20~0.25, the elastic modulus ratio($E_1/E_0$) is 06~1.0, and the ratio of steel disk thickness to drilling diameter(t/D) is 3.0. The overlay thickness, the distance from specimens to corner border(L_$_{corner}$), the distance between cores(L_$_{coic}$) almost do not affect to the stress concentration.

  • PDF

Experimental Study on HCCI Combustion Characteristics of n-heptane and iso-octane Fuel/air Mixture by using a Rapid Compression Machine (급속압축장치를 이용한 노말헵탄.이소옥탄 혼합연료의 HCCI 연소특성에 대한 연구)

  • Lim, Ock-Taeck
    • Journal of ILASS-Korea
    • /
    • v.16 no.4
    • /
    • pp.167-175
    • /
    • 2011
  • The HCCI engines have been known with high efficiency and low pollution and can be actualized as the new internal combustion engines. However, As for(??) the ignition and combustion depend strongly on the oxidation reaction of the fuel, so it is difficult to control auto-ignition timing and combustion duration. Purpose of this paper is creating the database for development of multi-dimensional simulation and investigating the influence of different molecular structure. In this research, the effect of n-heptane mole ratio in fuel (XnH) on the ignition delay from homogeneous charge compression ignition(HCCI) has been investigated experimentally. By varying the XnH, it was possible to ascertain whether or not XnH is the main resource of ignition delay. Additionally, the information on equivalence ratio for varying XnH was obtained. The tests were performed on a RCM (Rapid Compression Machine) fueled with n-heptane and iso-octane. The results showed that decreasing XnH (100, 30, 20, 10,0), the ignition delays of low temperature reaction (tL) and high temperature reaction (tH) is longer. And the temperature of reaction increases by about 30K. n-heptane partial equivalence ratio (fnH) affect on tL.and TL. When ${\phi}$nH was increased as a certain value, tL was decreased and TL was increased.