• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.196-199
• /
• 2008

In this study, gas hydrate production has been followed using swapping method to investigate the effect of injection rate of flue gas and soaking period in unconsolidated artificial sand sample. The results shows that recovery factor of methane gas decreases with increasing the injection rate of flue gas. This indicates that the velocity of flue gas in porous media may act as kinds of inhibitor for production of hydrate. Also recovery factor increases with increasing the soaking time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.1
• /
• pp.9-14
• /
• 1999

Factors affecting gene gun-mediated expression of the human erythropoietin gene were investigated in primary cultured oviduct cells from laying hens. The human erythropoietin gene was transfected by a gene gun method at $1.25{\mu}g$ per dish, and cultured in a synthetic serum-free medium for 72 hrs. The concentration of human erythropoietin mRNA was determined by RNA : RNA solution hybridization. In experiment 1, the effect of changing the shooting pressure of DNA-coated microparticles with nitrogen gas was tested at 20 and $60kgf/cm^2$. The results showed that the erythropoietin mRNA concentration was significantly higher at 60 than $20kgf/cm^2$. In experiment 2, the effects of supplementing the medium with fetal calf serum at 10%, and raising the shooting pressure from 60 to $80kgf/cm^2$ on the cell number and erythropoietin gene expression were examined. Although supplementation with fetal calf serum significantly increased the cell numbes compared with no supplemented controls (p < 0.05), erythropoietin mRNA concentration per $10^3$ cells was not affected. Raising the shooting pressure from 60 to $80kgf/cm^2$ did not affect either of the parameters, In experiment 3, the effect of supplementing ascorbate 2-phosphate at 0.5 mM was tested. The results indicated that the ascorbate supplementation significantly increased the cell number (p < 0.05), and tended to increase erythropoietin mRNA concentration (p < 0.1). Thus, for human erythropoietin gene expression by using the gene gun method, shooting pressure with nitrogen gas should be sufficient at $60kgf/cm^2$ and supplementation with ascorbate phosphate would be useful to enhance not only the cell proliferation but also erythropoietin gene expression.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.728-735
• /
• 2015

A gas gun system to replicate the flight motions of large caliber spin-stabilized ammunition has been investigated experimentally and numerically. The system is specially designed to study aerodynamic characteristics and dynamics of a flight body ejected from a cargo shell or a subsonic projectile itself at up to 2,000 rpm and 100 m/s. Raynolds-averaged Navier-Stokes equations with a overset mesh technique and 6-DOF dynamics were solved to decide the chamber pressure according to the muzzle velocity input by users. The predicted velocity values show less than 6 % of discrepancies compared to experimental data. The system has successfully been tested for the simulation of deployment of a parafoil for a 155 mm gun-launched projectile.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.241-246
• /
• 2000

Gas hydrates are solid solutions when water molecules are linked through hydrogen bondin create host lattice cavities that can enclose a large variety of guest gas molecules. The natural hydrate crystal may exist at low temperature above the normal freezing point of water and pressure greater than about 30 bars. A lot of quantities of natural gas hydrates exists in the ear many production schemes are being studied. In the present investigation, depressurization method considered to predict the production of gas and the simulation of the two phase flow - gas and - in porous media is being carried out. The simulation show about the fluid flow in porous have a variety of applications in industry. Results provide the appearance of gas and water prod the pressure profile, the saturation of gas/ water/ hydrates profiles and the location of the pl front.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.145-150
• /
• 2003

The present study aims to optimize the performance of the Two-Stage Gas Gun by using the experimentally obtained data. RSM(Response Surface Method) was adopted in the optimization process to find the operating parameter than can maximize the projectile speed with the minimum number of tests. To decide the test points which results can consist of the response surface, 3$^{k}$ full factorial method was used, and the design variables were chosen with piston mass and 2$^{nd}$ driver fill pressure. The response surface was composed by nine test results and consequently the optimization was done with GENOCOP III, inherently GA code, in order to seek the optimal test point. The optimal test condition from the response surface was verified by the experiment. Results showed that the optimization process with response surface can successfully predict the test results fairly well. This study shows the possibility of performance optimization for the experimental facilities using numerical optimization algorithm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.998-1005
• /
• 2010

Rifling force has a torsion impulse effect on the gun tube and thus generates undesirable vibration of the gun tube about its bore axis, putting additional stress on the projectile. High rifling force at the muzzle of the gun tube may adversely influence the trajectory of the projectile. And, the service life of rifled gun barrels is known to depend on the rifling force. Rifling force along the path of the projectile in the longitudinal direction of the gun tube can be described with projectile mass, projectile velocity, gas pressure curve and rifling angle. Under the same conditions, the character of the rifling of the gun barrel decisively influences the rifling force curve. To reduce the above mentioned harmful effect, locally distinct maximum of rifling force has to be avoided and maximum rifling force needs to be minimized. The best way to minimize the maximum rifling force is to design a rifling angle function so that the rifling force curve has a near trapezoidal shape. In this paper a new approach to make the optimal rifling force curve is described. The rifling angle determining the rifling force is developed by combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.57.1-57.1
• /
• 2008

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.19-19
• /
• 2000

항공 탄도학 분야에 있어서 여러 다양한 형태의 발사장치들이 제시된 바 있으나, 고속 분야에서 최고의 성능을 인정을 받은 것은 constant-base-pressure gun의 개념에서 나온 2-단계 기포(two-stage light gas gun)이다. 이러한, 2-단계 기포는 1, 2차 구동부와 피동부로 구성되며, 작동 원리가 간단하고 여러 작동 인자들의 변화를 통하여 성능 향상을 이룰 수 있다. 반면에 구조적인 강도 문제로 인한 작동 한계가 있으며 내부에서는 고온, 고밀도의 영향으로 추진기체에 Nonideality현상 등이 일어난다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.61-66
• /
• 1998

Since a gas turbine is made use of generating electricity for peak time, it is a very important to operate a peak time load with safety. The main components of a gas turbine are the compressor, the combustion chamber and the turbine. So, there also must be modeled a component of gas turbines for the control with safety but it is not easy. In this paper we acquire a transfer function based on the operations data of Gun-san gas turbine and study to apply Neural-Network 2-DOF PID controler to control loop of gas turbine to reduce phenomena caused by integral and derivative actions through simulation. We obtained satisfactory results to disturbances of subcontrol loop such as, fuel flow, air flow, turbine extraction temperature.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2123-2125
• /
• 2001

In thermal power plant, the efficiency of a combined power plant with a gas turbine increases, exceeding 50%, while the efficiency of traditional steam turbine plants is approximately 35% to 40%. Up to the present time, the PID controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain without any experience, since the gain of the PID controller has to be manually tuned by trial and error procedures. This paper focuses on the neural network tuning of the 2-DOF PID controller with a separated 2-DOF parameter (NN-Tuning 2-DOF PID controller), for optimal control of the Gun-san gas turbine generating plant in Seoul. Korea. In order to attain optimal control, transfer function and operating data from start-up, running, and stop procedures of the Gun-san gas turbine have been acquired, and a designed controller has been applied to this system. The results of the NN-Tuning 2-DOF PID are compared with the PID controller and the conventional 2-DOF PID controller tuned by the Ziegler-Nichols method through experimentation. The experimental results of the NN-Tuning 2-DOF PID controller represent a more satisfactory response than those of the previously-mentioned two controller.