• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.95-103
• /
• 2002

The consumption in the clothing's living has been diversified and rich by the increase in pay, the ostentatious propensity to consume and the diversification of distribution on structure in accordance with the advance of clothing industries, etc. The clothing, however, was not used properly due to the thoughtless purchase, the sudden change of fashion and the difficulty in the use and management of clothing. Most rural communities, furthermore, have the poor market, and the unreasonable management could be often observed, e.g., some people don't follow the care label or burn the clothing to waste. This study was conducted to provide the tool measuring the standardized clothing management behaviors so that the systematic and effective instruction could be achieved to improve the living standards 623 rural and urban housewives to develop the tool measuring the standardized clothing management to compare and measure the effect of before and after the education and guide all the way. And then, we developed the standardized measurement tool consisting of 6 parts of 60 questions after analyzing the validation and reliability of the questions. As a result of analyzing the validation and reliability of the developed tool, each Conbach alpha value of clothing living showed the good reliability; the value of the purchase plan was 0.76, the purchase was 0.83, the wear was 0.80, the management was 0.84, the storage was 0.83, and the disposal was 0.74, which indicated that it was able to use as a standardized tool.

• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.183-198
• /
• 1998

This study was done in order to present clinical trial method for safety of herb-acupuncture. The results were summerized as follow: In case of western medicine, clinical trial divides into four phase 1. Phase I: Investigate safety and drug movement for health people. 2. The first phase II: Investigate safety, effectiveness for the limited patient. The late phase II: Investigate propriety of an applicable disease, the way to use and dose. 3. Phase III: Through the comparative, public trial, investigate a final, applicable disease and side effect. 4. Phase IV: After NDA, investigate safety and effectiveness for the wide patients. In case of herb-acupuncture, we have to investigate the following for safety and effectiveness 1. Drug dose: Decide with 1/2 or 1/3 of oral dosage or a basis of animal's of maximum dosage or a ratio of man and animal. 2. Toxicity: Examine blood, urine, liver function, EKG, after herb-acupuncture during acertain period of time. 3. Regional response: Estimate response of swelling, redness, pruritus. etc 4. Treatment effectiveness: After exactly diagnosis, estimate effectiveness with a objective guide post.

• Journal of Integrative Natural Science
• /
• v.17 no.2
• /
• pp.53-58
• /
• 2024

This study explores the enhancement of mechanical properties in Polymethyl Methacrylate (PMMA) composites through the incorporation of Methyl Methacrylate (MMA) and Ethylene Glycol Dimethacrylate (EGDMA). Utilizing Digital Light Processing (DLP) technology, we conducted a series of experiments to analyze the impact of varying concentrations of MMA and EGDMA on PMMA. The results indicate that while MMA demonstrates non-linear and variable mechanical strength across different PMMA concentrations, EGDMA consistently improves mechanical strength as PMMA concentration increases. This consistent enhancement by EGDMA suggests a stable and predictable reinforcement effect, which is critical for applications requiring high mechanical strength. Our comparative analysis highlights that EGDMA is a more effective additive than MMA for optimizing the mechanical performance of PMMA composites. Specifically, EGDMA's ability to provide uniform reinforcement across various PMMA concentrations makes it ideal for high-strength applications. These findings are significant for material scientists and engineers focused on the design and development of advanced PMMA-based materials. In conclusion, this research underscores the importance of selecting appropriate additives to enhance the mechanical properties of PMMA composites. The superior performance of EGDMA in reinforcing PMMA suggests its potential for broader applications in fields such as automotive, construction, medical devices, and 3D printing. This study provides valuable insights that can guide future research and development in high-performance composite materials, paving the way for innovative applications and improved material efficiency.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.39-49
• /
• 2009

This research analyzes current pedestrian's safety zone choice standard problem and described about correct standard re-thesis at real. About problem of pedestrian traffic accidents to specific item statistical data to basis ramification of pedestrian traffic accidents, occurrence type of accident, action type etc. synthetically analyze and mark pedestrian's safety zone by countermeasure for decrease of pedestrian traffic accidents and utilize operating domestic outer garment reward and drew domestic Zone30 zone choice standard. Also, because analyzing effect that traffic discharge and speed through on-the-spot probe get in pedestrian thinking, presented quantitative standard, and analyze accident special quality of back pedestrian traffic accidents occurrence number of item and so on do accident type beside quantitative standard, road function, accident latitude and present standard. Specially, take advantage of statistical data of traffic accidents and put emphasis in pedestrian safety. Also, because establishment standard about safety facility establishment of Zone30 zone and systematic thesis of operation way do not consist, standard guide of consistency it is no and does equipment that is established in Zone30 zone because confusion happens by each local unit presented establishment and operation way, and present Zone30 zone.

• Journal of The Korean Association For Science Education
• /
• v.17 no.1
• /
• pp.55-64
• /
• 1997

Experiments done in traditional physics laboratories have been criticized for giving too detailed instruction so that student could follow the experimental procedure without understanding. This type of experiment is often called "cookbook experiment." Cookbook experiment was known to be little help to understand the physics concepts and to increase student interest. To solve these problems with traditional cookbook experiment, non-directive introductory physics laboratory was designed and tried with the freshmen of Department of Physics Education of Seoul National University. Non-directive laboratory was characterized by the lack of step by step instruction for students to follow. The instruction students received consisted of the goal of experiment, a short introduction, and a list of suggested materials to be used. Student designed the experimental procedure and decided what material they wanted to use. One group submitted one lab report as a group to encourage cooperation among students. Lab report could be written in any form students wanted and no penalty point was given to poor data or inappropriate theory, etc to encourage taking risks. Penalty points were given if the students did not get involved during class hours. Student received extra point for being creative and / or working hard. Teaching assistants used Socratic dialogue in helping students to find their own way instead of explaining what they had to do. Students' interest about the non-directive experiment was studies at the of the semester. A questionnaire was made for students to answer. The questionnaire consisted of four categories, the equipment and the laboratory, the experimental procedure, the lab report, and teaching assistant. For each category, student were asked to explain the differences from other laboratory classes, features they liked and the reasons why they do, features they did not like and why they did not. At the end of the questionnaire, students were asked what hey wanted to change and what they did not. They also could put any opinion they had other than the questions asked. Student overall opinion was very positive. All the students said they liked the lack of detailed experimental procedure because it gave them the feeling of achievement, made them feel challenged and think in more diverse and creative ways. Students liked the lab report because group report forced them to discuss more and the free form lab report helped them to focus on the what they did. Student responses about the teaching assistant was also positive but not as enthusiastic as the experimental procedure or lab report. However students recognised that the role of the teaching assistant was as a guide, a supporter, or a facilitator.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.71-80
• /
• 2006

It is required to study systematical on the concrete quality management to extend structure life because rebuilding effect is reducing under present condition of large sized and high stories structure. Concrete, which shows its intensity by hydrating action and a big change in quality according to hot weather and temperature, produces a lot of quality problem under hot and cold weather. Because of each specification and construction plan which does not have basic standard on site, concrete's quality is irregular and makes some defect. As a result, Dae-gu is fumed out to be the longest area after investigating application period and days focused on 8 cities weather information about t relationship between hot weather circumstance and construction environment. Therefore, we first surveyed the curing construction processing in the region and found out the problem of quality management. Then figure out the way of solution. Moreover, we integrated curing quality management, which is applied differently to each site, to have equal quality and to reduce defect from construction site. And then, based on various test of construction condition and analysis of quality management item, we suggest effective concrete quality management to make curing construction standard guide and plan under hot weather.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.408-421
• /
• 2012

The purpose of this study was to verify differences in changes of physical self-concept between Taekwondo participation group and non Taekwondo participation group in order to meet the needs of the study the limitations of previous studies had to be considered. The participants were elementary students in S city selected by this researcher. 30 students were in the Taekwondo participation group and 40 students were in the non Taekwondo participation group decided by ACSM(15) exercise guide line standard, three times repetition measurements per 12 weeks were executed for $2{\times}3$ mixed design with repeated measure. For this statistic, SPSS 12.0 for windows was used for technical statistic, two-way ANOVA, paired t-test, and independent t-test. The results were as follows; First, there were differences of change pattern in physical self-concept generally between Taekwondo participation group and non Taekwondo participation group. Second, there was a difference between Taekwondo exercise group and non Taekwondo exercise group according to 1st and 2nd, 1st and 3rd measurement point partially. Third, there were differences between the Taekwondo exercise group and non Taekwondo exercise group on the 2nd and 3rd measurement. In conclusion, Taekwondo discipline tended to have a large effect increasing physical self-concept.

• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.538-548
• /
• 1995

Exercises are achievement oriented, the process is frequently perceived as hard and difficult Participants drop out from exercise programs in the middle of the training period. Dance movement, which is the deliberate and systematic use of movement, is enjoyable during the movement and provides opportunities for persons to express them-selves. Regular long term dance movement may in-duce a training effect with a decreased drop out rate. Dance movement could be one way to attain wellness, however, there have been few studies to evaluate both physiological and psychological aspects of dance movement. This study focused on evaluating the effects of dance movement training on body weight, resting blood pressure and heart rate, limb circumference and strength, stress response and subjective feelings. This quasi-experimental study was designed as a nonequivalent control group pre test -post test study. Ten healthy fe-male subjects, aged between 19 and 31 years volunteered for an eight week dance movement program. Ten healthy female subjects, between 19 and 21 years of age paticipated as controls. None of the subjects had performed regular physical activity for six months prior to the study. Dance movement was created with reference to Heber's movement guide. The Dance movement program consisted of approximately 30 minutes of dance, three days per week, for eight weeks. During each 30 minute work out, there were approximately 5 minutes of warm-up dancing, 20 minutes of conditioning dance and 5 minutes of cool-down dancing. The intensity for the conditioning phase was at between 60% and 65% of age-adjusted maximum heart rates. Body weight, resting blood pressure and heart rate, circumference of mid upper arm, mid thigh and mid calf, muscle strength of upper and lower limb, physical and psychological response to stress were measured prior to, and following the experimental treatment. Body weight was measured by digital weight scale(Kyung In Corp., Korea). Resting systolic and diastolic blood pressure were measured by sphygmomanometer, Resting heart rate was measured for one minute in a relaxed sitting position using the radial artery. Circumference of mid upper arm, mid thigh and mid calf was determined by tape measure. Muscle strength of the upper extremities was measured by a grip dynamometer (Takei Corp. No.1857, Japan) and that of the extremities was measured by the length of time the leg could be held at 45° Physical and psychological responses to stress were measured using the Symptoms of Stress (SOS)Scale. Paticipants in the dance movement were interviewed by the facilitator following the eight weeks, and their thematic responses about the dance movement were recorded. Following the eight week dance movement train-ing, body weight decreased significantly, circumference of mid thigh and mid calf increased. The length of time leg - raising could be held tended to increase following the dance movement training. Resting systolic and resting heart rate showed a tendency to decrease. Total mean score of stress response tended to de-crease, and mean score of habitual patterns, do-pression, anxiety / fear, anger and cognitive disorganization decreased remarkably following the eight week dance movement. Thematic responses about the dance movement were positive following the training.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.180-186
• /
• 2008

Purpose: This study was performed to evaluate the effect of the implant recipient site preparation methods on primary stability of implants with the instruments of $Osstell^{TM}$ and $Periotest^{(R)}$ in the iliac bone of cadaver. Methods and materials: The 8 iliac bones in 4 cadavers and implants treated with resorbable blasting media (RBM) were used. $Periotest^{(R)}$ (Simens AG, Germany) and $Osstell^{TM}$ (Model 6 Resonance Frequency Analyser: Integration Diagnostics Ltd., Sweden) were used to measure primary stability of implants. Implants were inserted into the iliac crest of the cadaver. In control group, the recipient site was prepared according to the manufacturer's recommendation: 1.8 mm guide drill, 2.0 mm initial drill, 2.7 mm pilot drill, 2.7 mm twist drill, 3.0 mm twist drill, 3.3 mm pilot drill, 3.3 mm twist drill, and 3.3 mm countersink drill as well as tapping drill were used in order. In the group 1, implant recipient sites were prepared by sequentially drilling from 1.8 mm guide drill to 3.0 mm twist drill and then inserted implants without countersinking and tapping. In the group 2, implant recipient sites were prepared to 3.0 mm twist drill and countersink drill and then inserted implants without tapping. In the group 3, the sites were prepared to 3.0 mm twist drill and countersink drill as well as tapping drill. In the group 4, the sites were prepared to 3.3 mm twist drill. In the group 5, the sites were prepared to 3.3 mm twist drill and countersink drill. A total of 60 implants were placed (n=10). The stability was measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally and buccolingually. To compare the mean stability of each group statistically, One-way ANOVA was used and correlation of instrument were analyzed using SPSS 12.0. The results obtained were as follows; 1. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ buccolingually showed the highest, and there are significant difference statistically between control group and experimental group 1,2,4 in each instruments respectively (p<0.05). 2. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally showed the highest. There are significant difference statistically between control group and all experimental groups in $Osstell^{TM}$, and between control group and experimental group 1,2,3,4 (p<0.05). 3. There are high correlation between the measurements of $Osstell^{TM}$ and $Periotest^{(R)}$ (p<0.05). Conclusion: These results indicate that the primary stability of implant can be obtained by the recipient sites preparation with smaller diameter drill than that of implant or minimal drilling.