• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.97-101
• /
• 2007

We have developed a Edge Position Controller (EPC) using a ultrasonic sensor and applied to a fabric machine as a web guide system. Hardware devices composed of a ultrasonic transmitter-receiver sensor module and microprocessor-based sensor signal processing system are developed to realize the proposed system. We evaluated the control characteristics of the EPC and the performance of the system was good enough to apply the actual system.

• Journal of Biomedical Engineering Research
• /
• v.29 no.5
• /
• pp.384-391
• /
• 2008

For use in the guide system for the people who are visually impaired, an obstacle searching device using synchronous ultrasonic wave emission was proposed and developed. Generally, the conventional obstacle detection methods use the ultrasonic distance measuring device with successive scan method. However, the scan method causes a theoretical error and it couldn't estimate accurate obstacle distances. The proposed synchronous firing method use the plural number of ultrasonic sensors which emit ultrasonic wave simultaneously and estimate the distance to the closest obstacle relatively accurately. We analytically analyzed the errors of the conventional and proposed methods and compared the quantitative differences of the errors. The differences verified by obstacle search experiments. Using the proposed ultrasonic wave synchronous firing method, 3 dimensional obstacle location estimating device was designed and implemented. The results of the 3 dimensional obstacle detecting experiments showed the proposed method had good performances and it would be sufficiently use in the guide system for the people who are visually impaired.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.97-98
• /
• 2011

The number of high-rise buildings has increased year after year, with there currently being 5 projects in progress to construct buildings higher than 100 stories in Seoul alone. The construction cost for such high-rise buildings is significantly higher than the cost for a conventional low-rise building, while maintenance costs are expected to be two to three times higher. To reduce the maintenance cost of a high-rise building, there is the need for a guide rail to be used for maintenance, which is why there is the need for research on the guide rail system. For this reason, as preliminary research to develop a guide rail, this study aims to derive the factors increasing construction cost by taking the installation of a guide rail into account. This is expected to lay the groundwork for the design and construction of guide rails for high-rise building maintenance.

• East Asian mathematical journal
• /
• v.32 no.2
• /
• pp.153-174
• /
• 2016

The purpose of this study is to provide an opportunity for better understanding and application of 2009 revised elementary school mathematics textbooks through focus group's investigations on the elementary mathematics teacher's guide books. First, We survey previous studies on the teacher's guide books to make the frame of investigation. Next, We compose focus group(8 teachers) for 3~4th grades, and analyze the teacher's guide books according to ready-made frame: compliance of curriculum, accuracy and fairness of contents, selection and organization of contents. As results of investigation, system of organization of the teacher's guide books is needed. Goal, contents, teaching methods, and evaluations have to be consistent in describing mathematical terms. And errors in mathematics and mathematics education are examined more carefully. The teacher's guide books afford teachers many materials and informations to teach mathematics through classroom lessons. So more study on the teacher's guide books and developmental study for the model guidebooks is needed along with the revised curriculum and new textbooks.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.5
• /
• pp.428-432
• /
• 2012

In the waste collection system, living waste is collected through the piping network. There are many confluent pipes in a piping network. These confluent pipes were often clogged up with waste. The optimal configuration of the confluent pipes has been defined by the design guide. However, nobody know how this design guide were determined. Therefore, in this paper, we found the design data for the confluent pipe configuration in order to avoid the waste clogging in a piping network. The distance between connected point on the confluent pipes should be longer than the previous design guide.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.263-268
• /
• 1997

Development of a high speed feed drive system has been a major issue for the past few decades in machine tool industries. The reduction of tool change time as well as repid travel time can enhance the productivity. However,the high speed feed drive system generates more heat in nature,which leads to thermal expansion that has adverse effects on the accuracy of machined part. The paper divides the feed drive system into the ball screw and guide way. For each part, the thermal behvior model is separtately developed to estimate the position error of the respective feed drive system that is caused by the thermal expansion. The modified lumped capacitance method is used to analyze the linear position error of the ball screw. The thermal deformation of guide way parts affects the straightness and angular error as well as linear position error. Finite element method is used to estimate the thermal behavior of these guide way parts. The effectiveness of the proposed models are verified through the experiments using laser interferometer.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.71-83
• /
• 1989

The optimization in the machining process has been a long-standing goal of the manufacturing community. The optimization is composed of two main subjects;one is to select an optimum cutting condition, and the other is to detect the emergency situation and take necessary actions in real-time base. This paper proposes a reliable and practical guide system whose purpose is the optimization of cutting conditions, and the detection of tool failure in the machining process. The optimal cutting conditions are determined through the estimation of tool wear rate and the establishment of access- ible field from the measured cutting temperature and force. Tool breakage is detected by the normal force component acting on minor flank face extracted from on-line sensed feed force and radial force. In experiments, the proposed guide system has proved availability for the decision of reliable cutting conditions for the given tool-work system and the detection of tool breakage in ordinary cutting environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.124-126
• /
• 2014

The NFC technology is contactless communication technology that one of the RFID/USN technology. NFC is available dual function that read and write without specified reader, and it is received attention because of high security and low price. This paper proposes design of a school guide system using NFC tag. First School visitants such as delivery man or the other person are confused about the location of building, so this system will be helpful in this situation.

• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.442-448
• /
• 2013

I&C (Instrumentation & Control) system is different from information system and the security design of the two systems are also different. The modeling activity is needed based on the security control guide in order to build I&C system security control. In this paper, the role and by the security control, we designed the relationship (that is, the relation schema) between the documents for 'The system for supporting the cyber security control of I&C system design' based on the security control guide. The designed schema plans 'The system for supporting the cyber security control of I&C system' for observing the security control guide, and is used as the database and content that supports its design and implementation. The process and system of the proposed schema is utilized and designed. The design of the schema and system is intensified in the design phase with the proposed mode and supporting the I&C system cyber security design.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.58
• /
• pp.29-39
• /
• 2000

This paper concerns the location of the transit point between adjacent loops and guide direction of loops in the tandem configuration manufacturing system. The tandem configuration has been used to solve control problems like the vehicle dispatching and traffic control. The transit point between loops needs to deliver the parts from one loop to another. The location of transit point between adjacent loops and direction of loops must be determined to minimize the total travel time of parts in the manufacturing system. The model formulation is developed, a numerical example is shown.