• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.544-555
• /
• 2004

Statement of problem: Shade selection has traditionally been accomplished by visual examination, which is particularly relevant to the shade selection of anterior teeth, but the subjective nature of visual analysis can lead to errors in shade matching. Recently shade selection systems have been developed to provide a more objective and scientific approach to understanding and clarifying shade selection. Purpose : The purpose of this study was analysis of various shade analyzing equipment with the goal of providing a more objective shade selection. Materials and method: Visual shade matching system selection(Vita Lumin Vacuum shade guide, Vitapan 3D Master shade guide) and mechanical shade matching method($ShadeEye^{(R)}$-EX Chroma Meter, $Shadescan^{TM}$ System) used for this study. The shade guide tap specimens for 10 extracted maxillary anterior teeth were produced by selecting shades using each shade matching system. The accuracy of the selection of shades for the teeth and fabricated specimens were evaluated by analyzing the calculated shade difference(${\Delta}E^*$), using a spectrophotometer and calculating the output of value $L^*,\;a^*,\;b^*$. Results and conclusion: The results show that the average ${\{Delta}E^*$ value (difference of shade) of the shade tap specimens to the actual specimen decreased in the following order: Vita Lumin Vacuum Shade Guide(VL), $ShadeEye^{(R)}$-EX Chroma Meter(SE) Vitapan 3D Master Shade guide(V3), and $Shadescan^{TM}$ System(55) : and that there are significant statistical differences between the VL and SS (p<0.05). In the analysis of the ${\Delta}E^*$ (difference of shade) value,40% of the VL group was found to be less than 3.3 (limit value of shade tap specimens clinically acceptable), 60% in the V3 group, 50% in the SE group, and 80% in the SS group.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.148-154
• /
• 2008

Diverging channel from gas burner exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW system. To improve the uniformity in velocity and temperature distribution of existing design(Case A and B) of 300 kW HRSG system, two additional test geometries have been chosen for the numerical simulation. At first, gas burner exit section has been centered to the inlet section of boiler(Case C) and uniformity has been improved considerably. Secondly, the diverging channel length can be further reduced for compact geometry with new guide vane design (Case D and E). Proposed design shows overall improvement in uniformity in velocity and temperature distribution compared to existing one.

• Asia pacific journal of information systems
• /
• v.28 no.1
• /
• pp.61-74
• /
• 2018

Meeting, Incentive travel, Convention, Exhibition (MICE) industries recently introduced new information systems, such as the exhibition guide system (EGS), to keep pace with Smart MICE and maximize the effect of exhibition performance. We investigate how persuasive EGS can affect the EGS acceptance of attendees via cognitive and affective response. We analyzed data from 442 EGS users at an exhibition. We found that information accuracy, information relevance, and source credibility were predictors of cognitive response. Source credibility had a significant effect on affective response. Furthermore, cognitive response was found to be a positive predictor of affective response and EGS acceptance. We also found affective response is a predictor of EGS acceptance. The theoretical and practical implications of the study were presented based on the results.

• Journal of the Korean Society for information Management
• /
• v.33 no.4
• /
• pp.27-57
• /
• 2016

The objective of this study is to explore the strategies to promote the use of the subject guide for Korean modern literature. To meet this objective this study conducted a survey on users' awareness of the subject guide service and sought out experts' opinions to identify the strategies to promote and improve the subject guide for Korean modern literature. The study proposes the following strategies: 1) Conduct promotional activities utilizing a variety of social media; 2) provide education for the user to enhance understanding of the utility of the subject guide; 3) build a website dedicated to the subject guide service for Korean modern literature; 4) provide an efficient subject-specific bibliography service by improving the quality of the subject guide, by offering full texts, ongoing content updates, and coordination with other institutions and agencies; and 5) tailor the service to user characteristics such as gender, age, occupation, and education level. Suggestions for future directions include research on the collaborative system, additional specific promotional strategies to promote the use of the subject guide, and development of evaluation indicators of the subject guide for Korean modern literature.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.52-60
• /
• 2013

Ejector-diffuser system makes use of high-pressure primary stream to entrain the low-pressure secondary stream through pure shear action between two streams. In general, the flow field in the ejector-diffuser system is highly complicated due to turbulent mixing, compressibility effects. A fatal drawback of the ejector system is in its low efficiency. Many works have been done to improve the performance of the ejector system, but not yet satisfactory. In the present study, a mixing guide vane was installed at the inlet of the secondary stream for the purpose of the performance improvement of the ejector system. A CFD method has been applied to simulate the supersonic flows inside the ejector-diffuser system. The present results obtained were validated with existing experimental data. The mixing guide vane effects are discussed in terms of the entrainment ratio, total pressure loss as well as pressure recovery.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1396-1403
• /
• 2006

This study shows that the system performance of a positioning system composed of a piezoelectric actuator-driven flexure guide depends largely on the preload applied on the flexure guide and the driving input amplitude. We used a flexure guided system that had an original resonant frequency of 54Hz. Our experiment showed that we could increase the driving bandwidth above the original resonant frequency, for a case involving a large preload and a small input amplitude. Results show that there is a specific 'separation frequency' where the response of the moving mass of the flexure system decouples from the response oi the piezoelectric actuator, and this specific separation frequency can be selected by a proper choice of the preload and the input amplitude. To find the separation frequency, sine sweep tests were performed. To confirm the increased system bandwidth frequency, open-loop sine tracking experiments were performed. Test results show that the system responds very well up to 130 Hz frequency higher than the original natural frequency (54Hz).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.4 s.109
• /
• pp.346-354
• /
• 2006

This study shows that the system performance of a positioning system composed of a piezoelectric actuator-driven flexure guide depends largely on the preload applied on the flexure guide and the driving input amplitude. We used a flexure guided system that had an original resonant frequency of 54 Hz. Our experiment showed that we could increase the driving bandwidth above the original resonant frequency, for a case involving a large preload and a small input amplitude. Results show that there is a specific 'separation frequency' where the response of the moving mass of the flexure system decouples from the response of the piezoelectric actuator, and this specific separation frequency can be selected by a proper choice of the preload and the input amplitude. To find the separation frequency, sine sweep tests were performed. To confirm the increased system bandwidth frequency, open-loop sine tracking experiments were performed. Test results show that the system responds very well up to 130 Hz frequency higher than the original natural frequency (54 Hz).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.213-218
• /
• 2019

In this paper, we study autonomous navigation system for path guide system by using RFID that is enable to navigate and load in hotel. In case of a mobile robot used in a general autonomous navigation guidance system, a large amount of sensors are added to the system in order to improve the accuracy, resulting in cost problems. Therefore, to reduce the number of sensors, and to increase the accuracy and recognition rate, an autonomous driving guidance system was implemented using one of the inexpensive small micro controller units (MCU) such as Raspberry Pi3.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.996-1002
• /
• 2013

This study addresses the development of a full duplex robotic system for transferring flat-panel display glass. We propose to accomplish this using a bidirectional linear transfer mechanism in place of the conventional rotary transfer mechanism. The developed full duplex robot comprises a driving part that carries the glass panel laterally, vertical part that can be moved up and down by means of a ball screw and linear motion guide arrangement, and hand part that slides by the cylinder of the driving part along the guide rail with a V-guide bearing attached to the bottom of the support. In addition, an alignment part prevents the hand part from derailing and holds the hand part while the driving part moves horizontally. The full duplex robot lifts and drives a glass panel directly while transferring it to the buffer and does not require rotational motion. Therefore, both transferring and stacking are realized with a single device. This device can be used in existing industrial facilities as an alternative to existing industrial robots in current as well as future process lines. The proposed full duplex robot is expected to save considerable amounts of time and space, and increase product throughput.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.135-137
• /
• 2014

The expansion of the transportation card, and the popularity of smart phones has been increasing social concern about the NFC technology. Has been focused on the use of e-commerce, most of the NFC, fulfilling the security problems or technical topic for this, but the reality is that the current debate on the new value added contents industry and a nonexistent connection. Leverage NFC for efficient order management system in order to build lunch or dinner by being pushed to ease restrictions on remodeling and renovation projects Food Truck vehicle through a small business support programs in the current government, but increasing interest in the Food Truck I study a model of ordering system for food truch 재소 s-guide system. A lot of the effectiveness of management as appropriate to the use of NFC for small business that operates as a server system is highly Food Truck tendencies tied to one router and server on the intranet without the need of internet connection system. I believe in this study S-Guide system contributes for business success for food truck of small business.